trinityboringsolutions.com

Clarksville City Texas Directional Boring: Cuthbert Soil, US 80 And Campbells Creek

Quick Answer: What does the top five feet look like near Green Street, and what lies below? The USDA soil survey maps fine sandy loam at the surface and sandy clay loam at about 40 inches, while the geologic map shows sand units below. We handle directional boring, also called horizontal directional drilling (HDD), for crossings of the Union Pacific track in Clarksville City. The Yukon, Oklahoma main office is 335 road miles from US 80, which affects mobilization. Cuthbert soil can hold a hole open, but clay on the reamer calls for staged passes and a timely pipe pull.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Clarksville City bores at a glance

  • Incorporated city in Gregg County, Texas. Population 787 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 335 miles, about 6.5 hours of driving.
  • Ground: Cuthbert soil is mapped on 27 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 80 and FM 2275. State permit office: TxDOT Tyler District.
  • Railroad track inside the boundary: Union Pacific, with 2 mapped street and rail crossings.
  • Named streams inside the boundary: Campbells Creek, Moody Creek and Sabine River.
  • Public water: City of Clarksville City, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring near Green Street in Clarksville City?

What does the top five feet look like near Green Street, and what lies beneath it? Clarksville City is mostly in Gregg County, with a Census Bureau Vintage 2024 estimate of 787 residents. We install water, sewer, gas, electric conduit and fiber lines, including service runs along Green Street and crossings near US 80. The USDA soil survey maps fine sandy loam at the surface and sandy clay loam at about 40 inches, details that shape the bore plan.

Our main office is in Yukon, Oklahoma, and Clarksville City work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and since 1982 we have done directional boring, applying that experience to planned crossings in Clarksville City. The 1.86 track miles of Union Pacific in Clarksville City call for careful route planning, whether a job needs a short service line or a longer casing.

Ditch Witch JT922 compact directional drill beside the Trinity Boring Solutions truck at NE 24th Street in Oklahoma City
Our Ditch Witch JT922 compact directional drill beside the Trinity truck on a sleeve bore at NE 24th Street in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What is Cuthbert soil like to bore in Clarksville City?

The USDA soil survey maps Cuthbert soil across 27 percent of Clarksville City, with Bowie fine sandy loam across 26 percent. Fine sandy loam makes up 59 percent of mapped surface texture. At about 40 inches, sandy clay loam is mapped under 69 percent of the area, while clay is mapped under 15 percent. We treat Clarksville City’s mapped soil patterns as planning information, not test borings, when developing a bore plan. On a Green Street route, the mix suggests both a workable sandy surface and clay that can cling to a reamer farther down.

USDA soil survey, inside the Clarksville City city limitsWhat is mapped
Soil series mappedCuthbert 27 percent, Bowie 26 percent, Lilbert 12 percent, Estes 8 percent and Kirvin 7 percent
Texture at the surfacefine sandy loam 59 percent, loamy fine sand 16 percent and clay 8 percent
Texture about 40 inches downsandy clay loam 69 percent, clay 15 percent and clay loam 8 percent
Engineering class about 40 inches downclayey sand (SC) 41 percent, lean clay (CL) 35 percent and fat clay (CH) 12 percent
Average clay content about 40 inches down30 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches48 percent of the area
Flood prone soils15 percent of the area
High corrosion risk for uncoated steel47 percent of the area

For Clarksville City, bedrock is not shown within the USDA survey’s top five feet, though deeper rock is not ruled out. Seasonal water tables are mapped within 60 inches across 48 percent of the area, and flood prone soils across 15 percent; pits near Campbells Creek need attention to water and channel depth. We account for Clarksville City’s mapped high steel corrosion risk across 47 percent when considering casing and tracer wire materials. The geologic map shows Quartz Sand Decomposition Residuum of Cenozoic age and Eocene Queen City Sand, both sand units that inform drilling but do not replace site checks.

What does it take to bore sandy clay loam in Clarksville City?

Clarksville City has fine sandy loam at the surface and sandy clay loam commonly mapped at about 40 inches. Along Green Street, we match the drilling fluid and reaming sequence to the ground we encounter.

  1. Cuthbert soil can stay open but stick to the reamer, so we use a staged reaming sequence and plan to pull pipe promptly on a Green Street bore.
  2. Fine sandy loam and loamy fine sand are mapped near the surface in Clarksville City; we manage the hole so loose ground does not cave before pipe is ready.
  3. Seasonal water tables are mapped within 60 inches across 48 percent of the city, so pits near Campbells Creek may need pumping and a compact work area.
  4. Before drilling near US 80 or Green Street, we expose each marked utility with hydrovac; a walkover locator tracks the head while depth and pitch are logged.
Open bore pit in red Oklahoma dirt with white PVC conduit stub ups and an orange safety barrier
An open bore pit in red Oklahoma dirt with PVC conduit stubbed up and a safety barrier around it.

How could Union Pacific crossings affect directional bores in Clarksville City?

US 80 has 2.1 mapped roadway miles inside Clarksville City, and FM 2275 has 1.5. Loop 485, US 271 and Texas State Highway 42 lie within 1.5 miles outside the limits. Green Street is the longest named street in the city at 1.44 miles, followed by Mollie Springs Road at 1.13 and Pelphrey Drive at 1.06. A bore route across US 80 or along those streets needs a plan that accounts for pavement, access and the lines already in the ground.

CrossingTypeMapped extentWho has a say
US 80US highway2.1 roadway miles insideState highway office
FM 2275State highway1.5 roadway miles insideState highway office
Loop 485Highway nearby0.9 miles outsideState highway office
US 271Highway nearby1.1 miles outsideState highway office
Texas State Highway 42Highway nearby1.5 miles outsideState highway office
Union PacificRailroad1.86 track miles insideThe railroad
Campbells CreekStream1.21 channel miles insideChecked for Corps of Engineers jurisdiction
Moody CreekStream0.77 channel miles insideChecked for Corps of Engineers jurisdiction
Sabine RiverStream0.45 channel miles insideChecked for Corps of Engineers jurisdiction
Lake DeverniaLake or pond101 acres, insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 1.86 track miles in Clarksville City, including the Union Pacific Mineola Subdivision; public mapping shows 2 street and rail crossings. A rail crossing needs an agreement with Union Pacific, with the crossing details set by that agreement. Campbells Creek runs 1.21 channel miles in the city, and Moody Creek runs 0.77; public mapping shows 8 street crossings of named streams. Lake Devernia is also inside the limits, so water crossings need a jurisdiction check during planning.

Who approves a bore beneath US 80 in Clarksville City?

For a utility crossing under US 80 or FM 2275 in Clarksville City, the line owner applies for the TxDOT utility permit through RULIS; the TxDOT Tyler District reviews it. Electric and communication lines need at least 60 inches of cover below the lowest crossed grade, while water needs 60 inches and pressurized sewer needs 60 inches at crossings. TxDOT rules call for boring or tunneling beneath existing highway pavement, with rural highway bores extending under all travel lanes. City streets such as Green Street belong to the incorporated city. A Union Pacific track crossing needs the railroad’s agreement, and a Campbells Creek crossing is checked for Army Corps jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities serve Clarksville City in Gregg County?

The City of Clarksville City public water system uses groundwater wells and reports 337 service connections serving 972 people. Near Green Street, the water main and service locations matter before a new connection is bored. Utilities reporting electric service in Gregg County include Southwestern Electric Power, Rusk County Electric Cooperative and Upshur Rural Electric Cooperative. We confirm the line owner for the specific address before planning an electric conduit bore, rather than assume one provider serves every Clarksville City property.

Line ownerWhat it isSourceSize
City of Clarksville CityPublic water systemGroundwater wells337 connections, 972 people served
Southwestern Electric Power, Rusk County Electric Cooperative and Upshur Rural Electric CooperativeElectric utilities reporting service in Gregg CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Clarksville City’s median year built at 1981; 22 percent of homes were built before 1960, and 24 percent in 2000 or later. A route near Green Street could involve an older service being replaced or a newer connection being added. Before the drill approaches marked utilities, we use hydrovac potholing to expose them: paint shows position, not depth, and older buried lines may not match a surface clue.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

Do you cover Clarksville City and nearby White Oak?

Clarksville City covers 6.37 square miles in Gregg County, at an elevation of 363 feet, and includes ZIP codes 75647, 75604 and 75693. White Oak is 2.3 miles east, and Warren City is 1.3 miles northwest; Longview, the county seat, is 7.8 miles east. US 80 and FM 2275 run inside the city, giving projects clear local route references. Our Yukon, Oklahoma main office is 335 road miles away, about a 6.5 hour drive, so distance can affect mobilization for work around Campbells Creek or Green Street.

Places near Clarksville City

What kinds of bores come up near Campbells Creek in Clarksville City?

  • Highway crossing: A US 80 bore needs a route beneath the pavement and enough room to extend under rural highway travel lanes.
  • Water service: A connection near the City of Clarksville City groundwater system needs its route checked against existing water lines and marked utilities.
  • Fiber drop: A Green Street fiber route can pass beneath pavement without cutting the street, with each marked line exposed before drilling nearby.
  • Creek crossing: A Campbells Creek bore needs depth planning beneath the channel and a jurisdiction check during crossing design.
  • Rail crossing: A route under Union Pacific track needs the railroad agreement to establish crossing details before work is planned.
  • Lake crossing: Work near Lake Devernia calls for checking the water crossing during planning and placing pits on suitable ground.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Green Street bore quote in Clarksville City?

For a Clarksville City quote, send the address or map pin, what is going in the ground, pipe or conduit size and footage; a sketch or plans help. Name a nearby feature such as Green Street or US 80 so we can understand the route. The route’s relationship to Campbells Creek, pavement or existing crossings can change the information needed to plan it.

A simple service run on Green Street with clear access and no creek, track or highway crossing is easier to plan. Cuthbert soil and the mapped sandy clay loam can affect reaming and fluid needs; crossing US 80 or Union Pacific adds design and coordination work. Length, pipe size, exposed utilities, pavement, creek or drainage crossings, pits, excavator time, sand backfill and emergency timing all shape the job. We account for the 335 road miles from Yukon when planning mobilization for directional boring in Clarksville City.

Questions people ask about boring in Clarksville City

Does Trinity take directional boring jobs in Clarksville City and Gregg County?

Yes. We take directional boring work in Clarksville City and staff it with our own crews or crews from partner drilling contractors we have vetted. Our main office is in Yukon, Oklahoma, and we stay involved from the first call through the bore log. That applies to routes near Green Street and US 80.

Could groundwater or flooding near Campbells Creek affect a Clarksville City bore pit?

It can. The USDA soil survey maps seasonal water tables within 60 inches across 48 percent of Clarksville City and flood prone soils across 15 percent. Near Campbells Creek, we plan pit placement and depth with wet ground and the channel in mind; pits may need pumping if water collects.

Does Cuthbert soil in Clarksville City create a corrosion concern for steel pipe?

The mapped area has high steel corrosion risk across 47 percent, so the line owner should consider casing and tracer wire materials for a Cuthbert soil route. In Clarksville City, we consider HDPE because it is not affected by the mapped soil corrosion concern. The material decision belongs to the line owner, based on the planned line and location.

What ground does a Clarksville City bore pass through near Cuthbert soil?

The USDA soil survey maps Cuthbert soil over 27 percent of Clarksville City and fine sandy loam at the surface over 59 percent. At about 40 inches, sandy clay loam is mapped under 69 percent. Those are survey patterns, not test borings, so the actual route near Green Street still needs field planning.

Will a directional bore in Clarksville City hit rock?

The soil survey does not map bedrock within the top five feet of Clarksville City, but that does not rule out rock at greater depth. The geologic map shows Cenozoic Quartz Sand Decomposition Residuum and Eocene Queen City Sand. A bore near US 80 still needs to be planned for the conditions encountered along its path.

Who approves a Clarksville City bore under US 80, and which TxDOT office reviews it?

The utility owner applies for a TxDOT utility permit in RULIS, and the TxDOT Tyler District reviews a US 80 right of way job in Gregg County. We provide the bore plan and profile and work under the permit issued to the line owner. Highway cover and installation details are set through the permit.

How far is Clarksville City from Yukon, and does nearby White Oak change mobilization?

The Yukon, Oklahoma main office is 335 road miles from Clarksville City, about a 6.5 hour drive. White Oak is 2.3 miles east of the city, but the job route, equipment needs and access still determine mobilization. A project on US 80 may require different planning from a short service near White Oak.

How much notice does Texas811 need for a bore on Green Street in Clarksville City?

Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. For a Green Street start, Texas811 describes the lead time as at least two working days. If the start slips more than 14 days past the original notice, submit a new request; refresh worn or moved marks before work continues.

What affects the cost of directional boring under US 80 in Clarksville City?

The scope drives the price, not a single local figure. Length and pipe size matter, as do Cuthbert soil conditions, pavement, exposed utilities and any creek or drainage crossing. A US 80 route or Union Pacific crossing adds planning needs, while pits, excavator time, sand backfill, emergency timing and the 335 road miles from Yukon also affect the job.

Where the Clarksville City facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Clarksville City

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Clarksville City, Texas

Type the address of your job in Clarksville City. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Clarksville City

Same county: Longview · Kilgore · Lake Cherokee · Liberty City · Lakeport · Easton. All counties: Texas county list.