Gladewater Texas Directional Boring: Bowie Soil, Union Pacific Track and Glade Creek
Quick Answer: Bowie fine sandy loam gives way to sandy clay loam below, so the drill needs a stable fluid plan. We do directional boring, also called horizontal directional drilling (HDD), in Gladewater for routes such as those beneath US 271. Gladewater is 333 road miles from our Yukon, Oklahoma main office, and Union Pacific track adds a crossing to plan around. Bowie soil can mix sand and clay, so staged reaming helps keep the hole open for the pipe.
Gladewater bores at a glance
- Incorporated city in Gregg County and Upshur County, Texas. Population 6,307 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 333 miles, about 6.4 hours of driving.
- Ground: Bowie soil is mapped on 25 percent of the area, with sandy clay loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 3 percent of the area.
- Highways inside the boundary: US 271, US 80, Loop 485, FM 2685 and FM 2275. State permit office: TxDOT Tyler District.
- Railroad track inside the boundary: Union Pacific, with 8 mapped street and rail crossings.
- Named streams inside the boundary: Glade Creek, Moody Creek, Sabine River and Victory Branch.
- Public water: City of Gladewater, surface water.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring in Gladewater and Gregg County?
Bowie soil and sandy clay loam are part of the ground we plan around in Gladewater, an incorporated city in Gregg and Upshur Counties. The Census Bureau Vintage 2024 estimate puts its population at 6,307. Along Main Street or US 271, we install water, sewer, gas, electric conduit and fiber by choosing a route that fits the line and the crossings.
Our main office is in Yukon, Oklahoma, and Gladewater work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore is roughly 4,100 feet with 48 inch pipe under the Arkansas River in Tulsa, Oklahoma. A typical Gladewater job is much shorter, such as routing a service around a Lake Drive crossing.

What does the Bowie soil survey show about Gladewater ground?
The USDA soil survey maps Bowie as the leading soil series across 25 percent of Gladewater. Bowie fine sandy loam and Bowie Urban land complex are common map units, while surface texture is fine sandy loam across 51 percent of the mapped area. At about 40 inches below the surface, sandy clay loam is mapped across 65 percent, with an average clay content of 27 percent. In Gladewater, we use mapped patterns for planning, not as test borings. For a bore near US 271, the mix of sand and clay can mean easy cutting in one layer and a hole that needs support in another.
| USDA soil survey, inside the Gladewater city limits | What is mapped |
|---|---|
| Soil series mapped | Bowie 25 percent, Cuthbert 17 percent, Lilbert 7 percent, Mattex 7 percent and Kirvin 6 percent |
| Texture at the surface | fine sandy loam 51 percent, loamy fine sand 21 percent and very fine sandy loam 9 percent |
| Texture about 40 inches down | sandy clay loam 65 percent, clay loam 13 percent and fine sandy loam 6 percent |
| Engineering class about 40 inches down | lean clay (CL) 49 percent, clayey sand (SC) 28 percent and silty clayey sand (SC SM) 8 percent |
| Average clay content about 40 inches down | 27 percent |
| Bedrock mapped within 60 inches | 3 percent of the area (0 percent hard rock, 3 percent weathered rock) |
| Seasonal water table within 60 inches | 50 percent of the area |
| Flood prone soils | 14 percent of the area |
| High corrosion risk for uncoated steel | 47 percent of the area |
Bedrock is mapped in only 3 percent of Gladewater within 60 inches, and none is mapped within 40 inches; typical depth is 47 inches. Seasonal water tables are mapped within 60 inches across 50 percent of the area, and flood prone soils across 14 percent, so pits near Glade Creek may need water management and a route below the channel. High steel corrosion risk covers 47 percent. The Queen City Sand, a Lutetian geologic unit of sand, siltstone and claystone, adds another reason to check actual ground conditions before selecting tooling.
What does it take to bore Gladewater sandy clay loam?
Gladewater’s sandy clay loam can support an open hole in clay rich sections but may cave where the sandier layers begin. We match the drilling fluid and reaming sequence to the route, including crossings near Glade Creek.
- In Bowie fine sandy loam, we match fluid and reaming to the sand and clay layers, then have the pipe ready before the final pass.
- Where seasonal water may reach pits near Glade Creek, we plan smaller pits and pumping so water does not disrupt the bore.
- At marked lines near the City of Gladewater water system, we hydrovac expose each utility on the route before drilling close to it.
- For routes beneath Main Street, a walkover locator tracks the drill head while we record depth and pitch through the crossing.

Where does a Gladewater line go under Union Pacific?
US 271 has 6.9 mapped roadway miles inside Gladewater, and US 80 has 4.7. Loop 485 adds 3.1 miles, with FM 2685 and FM 2275 also inside the limits. TxDOT roads need a route that avoids cutting existing highway pavement. Lake Drive is the longest named street at 5.89 miles, followed by Loop 485 and Main Street. A bore along one of these streets can keep pavement, driveways and sidewalks intact, with entry and exit pits placed off the crossing.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 271 | US highway | 6.9 roadway miles inside | State highway office |
| US 80 | US highway | 4.7 roadway miles inside | State highway office |
| Loop 485 | State highway | 3.1 roadway miles inside | State highway office |
| FM 2685 | State highway | 1.8 roadway miles inside | State highway office |
| FM 2275 | State highway | 1.1 roadway miles inside | State highway office |
| Texas State Highway 135 | State highway | 0.5 roadway miles inside | State highway office |
| Union Pacific | Railroad | 4.49 track miles inside | The railroad |
| Glade Creek | Stream | 4.43 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Moody Creek | Stream | 3.05 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Sabine River | Stream | 2.02 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Victory Branch | Stream | 1.68 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Carter Creek | Stream | 0.65 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Mc Kinley Branch | Stream | 0.18 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Glade Branch | Stream | 0.05 channel miles inside | Checked for Corps of Engineers jurisdiction |
Union Pacific has 4.49 track miles inside Gladewater on its Mineola Subdivision, and Amtrak uses the track. Public mapping shows 8 street and rail crossings in the city, so a route that meets the track needs planning with the railroad owner. Glade Creek runs 4.43 channel miles here; Moody Creek and the Sabine River also cross the city. Mapping shows 14 street crossings of named streams. A route under a creek or Lake Gladwater is checked for federal water jurisdiction during planning.
Do I need a permit to bore under US 271 in Gladewater?
US 271 is a US highway, so work within its right of way goes through TxDOT’s utility permit process. The TxDOT Tyler District reviews the application, which the utility that owns the line submits through RULIS. We prepare the bore plan and profile and work under the owner’s permit. US 80 and Loop 485 also need the appropriate highway route review when work is in state right of way. For a Union Pacific track crossing, the line owner needs a crossing agreement with the railroad. The city is incorporated, so its streets are city streets. Glade Creek crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines are already buried near the City of Gladewater system?
The City of Gladewater public water system uses surface water and serves 6,441 people through 3,111 service connections. Before a bore near its water lines or US 271, marked utilities on the route are exposed with hydrovac potholing so their depth is known. Electric utilities reporting service in Gregg County include Southwestern Electric Power, Rusk County Electric Cooperative and Upshur Rural Electric Cooperative. Before planning an electric conduit bore in Gladewater, we confirm the line owner for that specific address.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Gladewater | Public water system | Surface water | 3,111 connections, 6,441 people served |
| Southwestern Electric Power, Rusk County Electric Cooperative and Upshur Rural Electric Cooperative | Electric utilities reporting service in Gregg County and Upshur County | EIA Form 861 | Confirm the line owner by address |
American Community Survey 2019 to 2023 five year estimates put Gladewater’s median housing year at 1974. The estimates show 24 percent of homes built before 1960, 55 percent from 1960 to 1999 and 21 percent in 2000 or later. Older service lines may be replaced, while newer construction may need a first connection along Loop 485. Before drilling near a marked water or electric line, we expose it by hydrovac; paint near Main Street shows position, not depth.

How far is Gladewater from Warren City and our Yukon yard?
Gladewater covers 11.57 square miles in Gregg and Upshur Counties, at an elevation of 336 feet, and its ZIP code is 75647. Warren City is 2.5 miles east; Union Grove is 2.9 miles northeast, and Clarksville City is 3.2 miles east. Longview, the county seat and nearest larger city, is 10.9 miles east. From our Yukon yard, Gladewater is 333 road miles and a 6.4 hour drive. That distance is part of planning mobilization for a bore near Lake Drive or US 271.
Places near Gladewater
- Directional boring in Warren City: 2.5 miles east
- Directional boring in Union Grove: 2.9 miles northeast
- Directional boring in Clarksville City: 3.2 miles east
- Directional boring in White Oak: 5.5 miles east
- Directional boring in East Mountain: 6 miles northeast
- Directional boring in Longview: 10.9 miles east
Which Gladewater jobs call for a bore near Glade Creek?
- Highway crossing: A bore beneath US 271 can carry water or conduit under pavement without opening a trench through the roadway.
- Water service: A route near the City of Gladewater system can connect a service while keeping the street surface intact.
- Fiber route: Main Street or Loop 485 can provide a route for fiber conduit where pavement and existing utilities shape the path.
- Creek crossing: A Glade Creek bore can pass beneath the channel, with depth and water jurisdiction considered during planning.
- Rail crossing: A Union Pacific crossing needs the railroad owner’s agreement and a route planned for the Mineola Subdivision track.
- Lake route: A crossing near Lake Gladwater calls for checking the proposed route and water jurisdiction before drilling.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for directional boring near Lake Drive in Gladewater?
Start with the address or map pin, such as a route near Lake Drive. Tell us what goes in the ground, whether that is a water line by the City of Gladewater system or fiber near Main Street. Give us the pipe or conduit size and the footage. A sketch or plans help show nearby US 271, track or creek crossings.
The route and work conditions set the price. Ground matters: Bowie soil and sandy clay loam can call for staged reaming, while wet pits near Glade Creek may need pumping. Crossings matter too, including Union Pacific track, US 271, pavement and drainage. Pipe size, bore length, exposed utilities, pit work, excavator time and sand backfill all affect the scope. Mobilization also reflects Gladewater’s 333 road miles from Yukon, and high profile or emergency work can add planning demands.
Questions people ask about boring in Gladewater
Does Trinity take directional boring jobs in Gladewater and Gregg County?
Yes. We take directional boring work in Gladewater, with our own crews and vetted partner contractor yards supporting the work rather than a local office. Our main office is in Yukon, and we stay the customer’s contact from the first call through the bore log, whether a route is near Main Street or US 271.
Can a line be bored beneath Glade Creek in Gladewater?
A bore can be planned beneath Glade Creek, but the route and ground conditions have to be reviewed for the crossing. Glade Creek runs 4.43 channel miles in the city, and the proposed crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. Soil and water conditions also guide the bore depth and pit setup.
Who runs the public water system in Gladewater, and where does its water come from?
The City of Gladewater owns the public water system, and its source is surface water. Gladewater’s system serves 6,441 people through 3,111 service connections, a scale we consider when planning underground work. If a proposed bore approaches those lines near Lake Drive, we locate and expose marked utilities before drilling close to them.
Who owns electric lines in Gladewater and Gregg County, and who confirms conduit specs?
Southwestern Electric Power, Rusk County Electric Cooperative and Upshur Rural Electric Cooperative report electric service in Gregg County. That county list does not identify the provider for every Gladewater address. We confirm the line owner and conduit requirements for the specific route before planning a bore near US 271.
Who controls Main Street in Gladewater, and does a bore have to cut it?
Gladewater is incorporated, so Main Street is a city street. A directional bore can pass beneath the pavement without cutting a trench through it, with entry and exit pits placed outside the crossing. The route still needs to account for marked utilities and surface conditions along the street.
How old are Gladewater homes and buried lines near Loop 485?
The American Community Survey 2019 to 2023 estimates give Gladewater a median housing year of 1974, with 24 percent of homes built before 1960. That does not establish the age of any particular buried line. A replacement bore near Loop 485 should expose marked utilities first and follow the proposed service route.
Can I reach Trinity after hours about an urgent bore near Main Street in Gladewater?
Yes. We keep a person answering Trinity’s phone 24 hours a day at (405) 409-7423 for Gladewater inquiries. For an urgent Main Street bore, have the location and line type ready so we can understand the immediate scope and discuss the next steps.
How much notice does Texas811 need for a Gladewater bore near Lake Drive?
For a bore near Lake Drive, submit the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. For Gladewater work, we make a new request if the start moves more than 14 days past the original notice. Before work continues in Gladewater, we refresh marks that wear off or move through Texas811.
What affects the cost of a directional bore under US 271 in Gladewater?
The job’s length and pipe size matter, along with Bowie soil conditions, the number of utilities to expose and any pavement or concrete. A US 271 route may involve highway crossing requirements, while a Glade Creek crossing can add planning and pit work. Mobilization from Yukon is another part of the job scope.
Where the Gladewater facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Gladewater
- U.S. Census Bureau, TIGER/Line 2024: Gladewater boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Gladewater
- U.S. Census Bureau, American Community Survey 2019 to 2023: Gladewater housing units and year built
- Macrostrat geologic map compilation: map units under Gladewater
- U.S. EPA Safe Drinking Water Information System: public water systems serving Gladewater
- U.S. Department of Transportation, North American Rail Network: track owners in Gregg County and Upshur County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Gregg County and Upshur County
- U.S. Geological Survey, Elevation Point Query Service: Gladewater elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Gladewater
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Gladewater
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Gladewater, Texas
Type the address of your job in Gladewater. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Gladewater
County: Upshur County directional boring. Same county: Kilgore · Lake Cherokee · Liberty City · Lakeport · Easton · Gilmer · Big Sandy · Ore City. All counties: Texas county list.
