trinityboringsolutions.com

Sunrise Shores Texas Directional Boring: Wolfpen Loamy Fine Sand, Day Stream, Lake Palestine

Quick Answer: Sunrise Shores is an unincorporated community in Henderson County, so it has no city government to own its streets; we use directional boring, also called horizontal directional drilling (HDD), for lines crossing Skyline Drive. Our Yukon, Oklahoma main office is 325 road miles away, with Bullard 11.4 miles east as the nearest larger city. Wolfpen loamy fine sand can cave behind the drill bit, so staged reaming and drilling fluid help keep the bore open. Day Stream has two mapped street crossings to plan around.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Sunrise Shores bores at a glance

  • Unincorporated community in Henderson County, Texas. Population 598 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 325 miles, about 6.4 hours of driving.
  • Ground: Wolfpen soil is mapped on 61 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • No state or US highway is mapped inside the boundary or within a mile and a half of it.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Day Stream.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring along Skyline Drive in Sunrise Shores?

Sunrise Shores is an unincorporated community in Henderson County, where streets are not owned by a city government. The Census Bureau counted 598 people here in the 2020 Census and does not publish yearly estimates for unincorporated places. We install water, sewer, gas, electric conduit and fiber lines, including service runs along streets such as Skyline Drive and Sunrise Drive.

Our main office is in Yukon, Oklahoma, and Sunrise Shores work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Trinity is a family business that started in 1965. Since 1982, four decades of directional boring have included working through loose surface soils like the Wolfpen loamy fine sand mapped in Sunrise Shores.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

What does the Wolfpen soil survey show in Sunrise Shores?

The USDA soil survey maps Wolfpen soil across 61 percent of Sunrise Shores, with loamy fine sand as the surface texture across the same share. At about 40 inches below the surface, the mapped texture is sandy clay loam, and average clay content is 24 percent. Wolfpen soil mapping helps us plan directional boring, but it does not replace test borings. The loose surface sand can fall in behind a drill head, while the deeper sandy clay loam calls for watching how the hole responds as the bore advances.

USDA soil survey, inside the Sunrise Shores mapped community boundaryWhat is mapped
Soil series mappedWolfpen 61 percent
Texture at the surfaceloamy fine sand 61 percent
Texture about 40 inches downsandy clay loam 61 percent
Engineering class about 40 inches downclayey sand (SC) 61 percent
Average clay content about 40 inches down24 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches54 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel0 percent of the area

The USDA soil survey maps a seasonal water table within 60 inches across 54 percent of Sunrise Shores, but not within 40 inches. Pits may still collect water, so access and pumping can matter. Flood prone soils and high steel corrosion risk are not mapped. Bedrock is not mapped in the top five feet, which does not rule out deeper rock. The geologic map names the Queen City Sand, of Lutetian age, and describes siltstone, sandstone and claystone; harder material at depth could slow drilling.

How is a bore run through sandy clay loam in Sunrise Shores?

Wolfpen loamy fine sand over sandy clay loam gives us two textures to account for in Sunrise Shores. We plan fluid use and reaming for the ground along the route, then track the drill head as the bore advances.

  1. At a route along Skyline Drive, we expose each marked utility on the bore path with hydrovac potholing before the drill approaches; paint shows location, not depth.
  2. Wolfpen loamy fine sand can cave behind the bit, so we build a supporting fluid wall and ream in stages before pulling pipe.
  3. Where the route enters sandy clay loam at about 40 inches, we follow the drill head with a walkover locator and log depth and pitch.
  4. The seasonal water table mapped within 60 inches across part of Sunrise Shores can fill pits, so we plan small pits and pumping where needed.
Trinity Boring Solutions water trailer supplying water for bentonite drilling fluid on a sleeve bore in northeast OKC
Our water trailer feeding the bentonite drilling fluid mix on a sleeve bore in northeast Oklahoma City.

What is in the way of a new line near Day Stream in Sunrise Shores?

No highways are mapped inside the Sunrise Shores community boundary or within 1.5 miles outside it, so the route is more likely to involve local streets than a highway crossing. Skyline Drive runs 1.06 miles within the community, Sunrise Drive 0.97 miles and Main Street 0.63 miles. Woodwind Drive adds another 0.41 miles. A bore can pass beneath pavement without cutting it, but the route and access points still need to fit the street and any existing lines.

CrossingTypeMapped extentWho has a say
Day StreamStream0.15 channel miles insideChecked for Corps of Engineers jurisdiction
Caney CreekStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Lake PalestineLake or pond15,279 acres, insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside the community or within 1 mile outside it, and no street and rail crossing is mapped. Day Stream runs 0.15 channel miles inside Sunrise Shores, where two street crossings of named streams are mapped. Lake Palestine is also inside the community boundary. A bore near Day Stream or the lake needs a crossing plan that accounts for water and checks for U.S. Army Corps of Engineers jurisdiction during planning.

Do I need a permit for a bore in Henderson County near Sunrise Shores?

Sunrise Shores has no city government, so responsibility for local streets rests with Henderson County or the state, depending on the road. No highway is mapped inside the community or within 1.5 miles outside it. If a route reaches an Interstate, US, Texas state, farm to market or ranch to market road right of way, TxDOT requires a utility permit. The TxDOT Tyler District reviews it, and the utility owner files through RULIS; we prepare the bore plan and profile for that filing. A Day Stream crossing is checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried in Henderson County near Sunrise Shores?

The water provider for a specific Sunrise Shores address cannot be matched from EPA drinking water records, which do not tie systems to towns. Confirm the provider with the county or local water district before planning a bore. Oncor Electric Delivery Company and Trinity Valley Electric Cooperative report electric service in Henderson County, but either may not serve every address. We confirm the line owner before planning an electric conduit bore near a street such as Skyline Drive.

Line ownerWhat it isSourceSize
Oncor Electric Delivery Company and Trinity Valley Electric CooperativeElectric utilities reporting service in Henderson CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Sunrise Shores’ median housing year at 1986. The estimates show 4 percent of homes built before 1960, 75 percent from 1960 to 1999 and 21 percent in 2000 or later. A replacement bore along Sunrise Drive may need to avoid older buried service lines, while newer construction can call for a new connection. We hydrovac pothole every marked utility on the path before drilling near it; paint shows position, not depth.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

How far is Sunrise Shores from Bullard and our Yukon office?

Sunrise Shores is an unincorporated community in Henderson County, on the west shore of Lake Palestine. Its land area is 0.36 square miles, its elevation is 376 feet and its ZIP code is 75758. Moore Station is 3.8 miles west, Coffee City 4.1 miles southeast and Emerald Bay 4.2 miles east. Bullard, the nearest larger city, is 11.4 miles east; Athens, the county seat, is 19.0 miles west. The Yukon yard is 325 road miles away, a 6.4 hour drive, which affects mobilization for a job near Day Stream.

Places near Sunrise Shores

Which jobs call for a bore near Sunrise Drive in Sunrise Shores?

  • Water service: A replacement or new service can run beside Sunrise Drive, with the route checked for existing lines before drilling.
  • Fiber drop: A fiber conduit bore along Woodwind Drive can avoid cutting the street surface and driveways.
  • Electric conduit: Oncor Electric Delivery Company and Trinity Valley Electric Cooperative report county service, so we confirm the line owner for the specific address.
  • Creek crossing: A line beneath Day Stream needs a planned water crossing and a jurisdiction check during planning.
  • Lake area service: A route near Lake Palestine needs access and crossing details included in the bore plan.
  • Utility replacement: A bore near Main Street can replace a buried line while keeping the street surface uncut.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Woodwind Drive bore quote in Sunrise Shores?

Start with the address or map pin, whether the line follows Woodwind Drive or crosses Day Stream, what goes underground, its size and the footage. A sketch or plans help show pits, pavement and existing lines. For a Lake Palestine area route, mark the proposed path clearly so we can assess access and crossings before preparing the job scope.

The price depends on the work at the specific Sunrise Shores address. Ground conditions matter: Wolfpen loamy fine sand can need staged reaming, while deeper sandy clay loam may change the drilling plan. Crossings such as Day Stream and exposed utilities add planning and field work. Pavement, pit size, excavator time and sand backfill affect the scope too. The 325 road miles from Yukon also affect mobilization, as can a high profile or emergency schedule.

Questions people ask about boring in Sunrise Shores

Does Trinity take directional boring jobs in Henderson County near Sunrise Shores?

Yes. We take directional boring work in Sunrise Shores and elsewhere in Texas. Our crews and vetted partner contractor yards support the work without changing who you deal with. For a route along Skyline Drive, we stay involved from the first call through the bore log, whichever crew is on site.

Could a replacement bore along Sunrise Drive run into older buried lines in Sunrise Shores?

It could. The American Community Survey 2019 to 2023 estimates give Sunrise Shores a median housing year of 1986, with 75 percent of homes built from 1960 to 1999. A replacement route along Sunrise Drive needs marked lines exposed by hydrovac potholing before the drill gets near them.

Will groundwater or flood prone ground affect bore pits near Day Stream in Sunrise Shores?

Groundwater can affect pits: the USDA soil survey maps a seasonal water table within 60 inches across 54 percent of Sunrise Shores. When planning near Day Stream, we do not rely on mapped flood prone soils. Near Day Stream, we account for the water table when placing pits and check the crossing for Corps jurisdiction during planning.

What ground does the Wolfpen soil map show for a bore in Sunrise Shores?

The USDA soil survey maps Wolfpen soil across 61 percent of Sunrise Shores. The surface texture is loamy fine sand, while sandy clay loam is mapped at about 40 inches. The loose surface material can cave behind the bit, so staged reaming and fluid support help keep the bore open.

Is a Sunrise Shores bore likely to hit rock below the soil?

Bedrock is not mapped in the top five feet of Sunrise Shores, but deeper rock is not ruled out. The geologic map identifies the Queen City Sand, of Lutetian age, with siltstone, sandstone and claystone. If harder material is encountered, drilling may take longer than in the mapped surface sand.

Can a line be bored beneath Day Stream in Sunrise Shores?

A bore can be planned beneath Day Stream, which runs 0.15 channel miles inside Sunrise Shores. The route needs a water crossing plan, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. We also account for the mapped street crossings of named streams.

How early should I call Texas811 for a bore near Skyline Drive in Sunrise Shores?

Count back at least two working days from the planned start near Skyline Drive, leaving out Saturdays, Sundays and legal holidays. The locate request cannot be made more than 14 days ahead. If the start slips more than 14 days past the original notice, make a new request; have worn or moved marks refreshed through Texas811 before work continues.

Does Bullard change how we mobilize for a Sunrise Shores bore 325 road miles from Yukon?

Bullard is 11.4 miles east of Sunrise Shores, while our Yukon, Oklahoma main office is 325 road miles away. That travel distance is part of mobilization planning, but the route, ground and crossings also shape the job. A bore near Day Stream, for example, needs crossing details reviewed.

What changes the cost of a directional bore near Day Stream in Sunrise Shores?

The route and scope matter. Wolfpen loamy fine sand, Day Stream crossing details, the number of utilities to expose, pavement, pit work and backfill all affect the job. The 325 road miles from Yukon also factor into mobilization. Send the address, line type, size and footage so we can assess the specific work.

Where the Sunrise Shores facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Sunrise Shores

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Sunrise Shores, Texas

Type the address of your job in Sunrise Shores. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Sunrise Shores

Same county: Athens · Gun Barrel City · Chandler · Tool · Malakoff · Mabank · Seven Points · Brownsboro · Eustace · Log Cabin · Trinidad · Payne Springs. All counties: Texas county list.