trinityboringsolutions.com

Seven Points Texas Directional Boring: Derly Soil, FM 85 and Persimmon Branch

Quick Answer: Seven Points is an incorporated small city, so its city streets belong to the city; we do directional boring, also called horizontal directional drilling (HDD), for routes under Cedar Creek Parkway. From our Yukon, Oklahoma main office, Seven Points is 271 road miles away, with FM 85 among the roads a bore may cross. The USDA soil survey maps heavy clay at about 40 inches across much of the area, so sticky cuttings and swelling soil affect reaming and pull timing. A route near Persimmon Branch also needs creek crossing planning.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Seven Points bores at a glance

  • Incorporated city in Henderson County, Texas. Population 1,515 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 271 miles, about 5.4 hours of driving.
  • Ground: Derly soil is mapped on 33 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 2 percent of the area.
  • Highways inside the boundary: FM 85, Texas State Highway 274 and Texas State Highway 334. State permit office: TxDOT Tyler District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Persimmon Branch and Bridge Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring in Seven Points, Henderson County?

Seven Points is an incorporated small city, and its city streets belong to the city. The Census Bureau Vintage 2024 estimate puts the population at 1,515 in Henderson County. We install water, sewer, gas, electric conduit and fiber where service routes follow streets such as Seven Points Boulevard or need to cross FM 85. The line type and route shape the bore plan.

Our main office is in Yukon, Oklahoma, and Seven Points work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For a short 3/4 inch service line or a long run using 48 inch casing, we handle bore lengths from 10 feet to 5,000 feet. Our family business started in 1965 and has done directional boring since 1982; a Seven Points route still gets planned for its own ground and crossings.

Compact Ditch Witch drill rig boring a new utility line across a front yard on a residential street in Edmond, Oklahoma
Our compact Ditch Witch drill boring a new utility line across a front yard on a residential street in Edmond, Oklahoma. Photos on this page are from our jobs in Oklahoma and Texas.

What is Derly soil like to bore in Seven Points?

The USDA soil survey maps Derly soil across 33 percent of Seven Points, with the Derly, occasionally ponded Rader complex also covering 33 percent. Loam is the mapped surface texture across 71 percent of the city, but the profile changes lower down: at about 40 inches, clay is mapped across 75 percent and clay loam across 22 percent. The survey maps no sandy area at that depth. Derly, Axtell, Freestone, and Ferris map patterns help us plan a Seven Points bore, but they are not test borings. On a route near Cedar Creek Parkway, the deep clay can cling to a reamer and grip pipe.

USDA soil survey, inside the Seven Points city limitsWhat is mapped
Soil series mappedDerly 33 percent, Axtell 28 percent, Freestone 14 percent, Ferris 9 percent and Wilson 5 percent
Texture at the surfaceloam 71 percent, fine sandy loam 15 percent and clay 11 percent
Texture about 40 inches downclay 75 percent and clay loam 22 percent
Engineering class about 40 inches downfat clay (CH) 56 percent and lean clay (CL) 43 percent
Average clay content about 40 inches down44 percent
Bedrock mapped within 60 inches2 percent of the area (0 percent hard rock, 2 percent weathered rock)
Seasonal water table within 60 inches53 percent of the area
Flood prone soils3 percent of the area
High corrosion risk for uncoated steel99 percent of the area

Bedrock is mapped within 60 inches on 2 percent of Seven Points, with typical bedrock depth at 53 inches; that map does not rule out deeper rock. A seasonal water table is mapped within 60 inches across 53 percent, so pits may need pumping. Flood prone soils cover 3 percent, including places to assess near Persimmon Branch. High steel corrosion risk is mapped across 99 percent, a reason for the line owner to consider casing and tracer wire materials. The Cenozoic limonitic sandy decomposition residuum includes claystone, sandstone and shale; the Paleocene Wills Point Formation is mostly clay with limestone.

How do crews bore Seven Points clay?

Derly soil and clay mapped about 40 inches down make the cuttings and the hole the main concerns on a Seven Points bore. We adjust fluid, reaming and timing to the route, including where it approaches FM 85.

  1. With clay mapped at about 40 inches in Seven Points, we use a thinner fluid mix with polymer and ream in stages so sticky cuttings do not load the hole.
  2. Because heavy clay covers much of the mapped soil at that depth, we watch fluid returns near FM 85 to avoid pressure lifting pavement.
  3. A seasonal water table is mapped within 60 inches across 53 percent of the city, so we plan smaller pits and pumping where water reaches the work area.
  4. We track the drill head from the surface and log depth and pitch on routes near Persimmon Branch, where the profile must stay beneath the channel.
Walkover locator at the edge of the wetland on a directional bore at the Cimarron site in Logan County, Oklahoma
Walkover locator at the edge of a wetland on a directional bore in Logan County, Oklahoma.

Where does a line have to go under Cedar Creek Parkway in Seven Points?

FM 85, Texas State Highway 274 and Texas State Highway 334 run inside Seven Points, so a crossing route may need state highway coordination as well as street planning. Cedar Creek Parkway is the longest named street at 4.45 miles inside the city; Seven Points Boulevard covers 4.11 miles and Jess Hinton Road 3.84 miles. Boring can carry a line beneath pavement without cutting the surface. The route and required cover determine the bore profile.

CrossingTypeMapped extentWho has a say
FM 85State highway6.4 roadway miles insideState highway office
Texas State Highway 274State highway5 roadway miles insideState highway office
Texas State Highway 334State highway2.3 roadway miles insideState highway office
Persimmon BranchStream0.69 channel miles insideChecked for Corps of Engineers jurisdiction
Bridge CreekStream0.05 channel miles insideChecked for Corps of Engineers jurisdiction
Caney CreekStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Sanders CreekStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Cedar Creek ReservoirLake or pond23,637 acres, insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Seven Points or within one mile outside its limits, and no street and rail crossing is mapped. Persimmon Branch runs 0.69 channel miles inside the city, while Bridge Creek runs 0.05 miles. One mapped street crossing intersects a named stream. Cedar Creek Reservoir is also inside the city, so a proposed crossing there needs water crossing review during planning.

Whose permission does a Seven Points bore under FM 85 need?

For a utility crossing FM 85, the cover requirement sets the bore depth: electric and communication lines need 60 inches below the lowest crossed grade, and water lines need 60 inches. Pressurized sewer also needs 60 inches at a crossing. TxDOT Utility Accommodation Rules call for boring or tunneling beneath existing highway pavement, with the bore extending under all travel lanes on rural highways. The utility owner applies through TxDOT’s RULIS system; the TxDOT Tyler District reviews it, and we prepare the bore plan and profile for that owner. City streets such as Cedar Creek Parkway belong to the city. A proposed Persimmon Branch or reservoir crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the lines in Seven Points, Henderson County?

The water provider for a specific Seven Points address has to be confirmed with the city, Henderson County or the local water district before a bore is planned. Public water records do not identify a provider for this place. Oncor Electric Delivery Company and Trinity Valley Electric Cooperative report electric service in Henderson County, but that does not identify the line owner at every address. We confirm the owner before planning an electric conduit bore near FM 85.

Line ownerWhat it isSourceSize
Oncor Electric Delivery Company and Trinity Valley Electric CooperativeElectric utilities reporting service in Henderson CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Seven Points’ median housing year at 1986. Survey figures put 5 percent of homes before 1960, 70 percent from 1960 to 1999, and 25 percent in 2000 or later; we plan Seven Points boring around field conditions. Older streets such as Jess Hinton Road may involve replacement routes, while newer construction can call for service extensions. We hydrovac pothole each marked utility on the bore path before drilling near it; for example, a proposed line beneath Jess Hinton Road needs the marked lines exposed first because paint shows position, not depth.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

Where is Seven Points near Gun Barrel City?

Seven Points is in Henderson County, with 2.75 square miles of land and an elevation of 399 feet. ZIP code 75143 serves Seven Points, but we locate each boring by its route rather than postal boundaries. Tool is 5.4 miles southeast, Gun Barrel City is 6.0 miles east, Kemp is 6.8 miles north and Mabank is 7.6 miles east. Gun Barrel City is the nearest larger city; Athens, the Henderson County seat, is 25.4 miles east. The Yukon yard is 271 road miles away, a 5.4 hour drive, which affects mobilization for work near FM 85.

Places near Seven Points

Which jobs call for a bore near Seven Points Boulevard in Seven Points?

  • Highway crossing: A water or conduit route beneath FM 85 needs a bore profile that meets the crossing cover and extends under the travel lanes.
  • Street service: A service beneath Seven Points Boulevard can pass under pavement without opening a trench across the road.
  • Creek crossing: A route beneath Persimmon Branch needs depth planning under the channel and a check for federal jurisdiction during planning.
  • Reservoir route: A proposed line beneath Cedar Creek Reservoir needs water crossing review and a profile suited to the crossing.
  • Electric conduit: Near Jess Hinton Road, marked utilities on the proposed bore path are exposed by hydrovac before the drill approaches them.
  • Fiber extension: A fiber route along Cedar Creek Parkway can use a bore to pass beneath driveways and pavement without cutting them.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Seven Points bore near Persimmon Branch?

For a Seven Points quote, send the address or map pin, what will go underground, the pipe or conduit size and footage; a sketch or plans help. A route along FM 85 or near Persimmon Branch matters because highway cover and water crossings can change the bore plan. We review the route and access before setting the work scope.

The ground and crossings are the first pricing questions: clay mapped about 40 inches down can call for staged reaming, while Persimmon Branch or Cedar Creek Reservoir adds crossing planning. Length, pipe or conduit size, and the number of utilities to expose also affect the work. Pavement, pits, excavator time and sand backfill can change the scope. Mobilization matters too, since Seven Points is 271 road miles from the Yukon yard.

Questions people ask about boring in Seven Points

Does Trinity Boring Solutions take Seven Points jobs in Henderson County, and how are crews assigned?

Yes. We take directional boring work in Seven Points and staff it with our own crews or crews from partner drilling contractors we have vetted. The job remains with Trinity from the first call through the bore log. A route near Cedar Creek Parkway is planned for its ground, access and crossings.

Who approves a bore under FM 85 in Seven Points?

TxDOT handles the state highway utility permit for an FM 85 crossing, with review by the TxDOT Tyler District. The utility owner submits the application through RULIS, and we prepare the bore plan and profile for that filing. Required cover depends on the line type and the crossed grade.

Can a line be bored under Persimmon Branch in Seven Points?

A bore can be planned under Persimmon Branch, subject to the route and ground conditions. The stream runs 0.69 channel miles inside Seven Points, so the profile must pass beneath the channel. When planning a crossing at Persimmon Branch, we check whether the US Army Corps of Engineers has jurisdiction.

Who owns electric lines in Henderson County near Seven Points, and who confirms conduit specs?

Oncor Electric Delivery Company and Trinity Valley Electric Cooperative report electric service in Henderson County. That county information does not establish which one owns a line at a particular Seven Points address. The line owner confirms conduit requirements before a bore is planned, including on a route near FM 85.

Does Seven Points or Henderson County control Jess Hinton Road, and must a bore cut it?

Jess Hinton Road is a city street because Seven Points is incorporated, so it belongs to the city rather than the county. A bore can pass beneath its pavement without cutting across the street. The route still has to account for marked utilities and the planned bore depth.

What do older buried lines mean for a replacement bore near Seven Points Boulevard in Seven Points?

Seven Points’ median housing year is 1986, and the American Community Survey estimates 70 percent of homes were built from 1960 to 1999. Those figures do not date a particular buried line, so its location and depth must be checked. Near Seven Points Boulevard, we expose marked utilities before drilling close to them.

What bore sizes and lengths can Trinity handle on Tool Drive in Seven Points?

We handle 3/4 inch service lines through 48 inch casing and bore lengths from 10 feet to 5,000 feet. A proposed Tool Drive route still needs review for its footage, soil and crossings. We use those details to determine the equipment and bore plan for the job.

How much notice does Texas811 need before work near Cedar Creek Parkway in Seven Points?

Texas811 needs a locate request at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days beforehand. If a Cedar Creek Parkway start slips more than 14 days past the original notice, a new request is needed. Along Cedar Creek Parkway, we refresh any worn or moved marks through Texas811 before our boring work continues.

What affects the cost of directional boring under FM 85 in Seven Points?

The route length and pipe or conduit size matter, along with Seven Points’ clay, the utilities that must be exposed, pavement, pits and equipment time. An FM 85 crossing brings its required cover and highway planning into the scope. Persimmon Branch crossings and mobilization from the Yukon yard can also affect the job.

Where the Seven Points facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Seven Points

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Seven Points, Texas

Type the address of your job in Seven Points. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Seven Points

Same county: Athens · Chandler · Malakoff · Brownsboro · Eustace · Berryville · Log Cabin · Trinidad · Payne Springs · Star Harbor · Murchison · Poynor. All counties: Texas county list.