Gun Barrel City Texas Directional Boring: Axtell Loam, Prairie Creek and US 175
Quick Answer: Main Street and Gun Barrel Lane carry long routes; we install lines beneath US 175 by directional boring, also called horizontal directional drilling (HDD). Gun Barrel City has 104.02 public road miles, and Prairie Creek runs 0.35 channel miles inside its limits. The Yukon main office is 277 road miles away, with Mabank 3.3 miles northeast. USDA mapping shows clay at 64 percent at 40 inches, where sticky cuttings can load a reamer and grip pipe.
Gun Barrel City bores at a glance
- Incorporated city in Henderson County, Texas. Population 6,999 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 277 miles, about 5.5 hours of driving.
- Ground: Axtell soil is mapped on 43 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 19 percent of the area.
- Highways inside the boundary: US 175, Texas State Highway 334, FM 85 and Texas State Highway 198. State permit office: TxDOT Tyler District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Prairie Creek.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can I call for directional boring near Prairie Creek in Gun Barrel City?
Gun Barrel City is in Henderson County, and the Census Bureau Vintage 2024 estimate puts its population at 6,999. A water, sewer, gas, electric conduit or fiber line can be bored beneath Main Street, Gun Barrel Lane or a driveway without opening the surface along the full route. The exact alignment tells us which marked lines need attention.
Our main office is in Yukon, Oklahoma, and Gun Barrel City work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For Gun Barrel City, our family business brings experience dating to 1965, and we have done directional boring since 1982. For routes near Prairie Creek or Main Street, we handle sizes from 3/4 inch service lines to 48 inch casing and lengths from 10 feet to 5,000 feet.

What kind of ground does Axtell soil mean for a bore in Gun Barrel City?
The USDA soil survey maps Axtell across 43 percent of Gun Barrel City, with Derly at 16 percent and Crockett at 13 percent. Axtell loam on 1 to 5 percent slopes covers 23 percent, and the 5 to 12 percent map unit covers 20 percent. About 40 inches down, clay accounts for 64 percent of mapped texture and clay loam 27 percent; average clay content there is 41 percent. These mapped patterns are not test borings, but they point to sticky cuttings that can pack a reamer.
| USDA soil survey, inside the Gun Barrel City city limits | What is mapped |
|---|---|
| Soil series mapped | Axtell 43 percent, Derly 16 percent, Crockett 13 percent, Normangee 6 percent and Nahatche 4 percent |
| Texture at the surface | loam 81 percent, clay loam 6 percent and fine sandy loam 4 percent |
| Texture about 40 inches down | clay 64 percent, clay loam 27 percent and sandy clay loam 3 percent |
| Engineering class about 40 inches down | fat clay (CH) 68 percent and lean clay (CL) 23 percent |
| Average clay content about 40 inches down | 41 percent |
| Bedrock mapped within 60 inches | 19 percent of the area (0 percent hard rock, 19 percent weathered rock) |
| Seasonal water table within 60 inches | 26 percent of the area |
| Flood prone soils | 4 percent of the area |
| High corrosion risk for uncoated steel | 89 percent of the area |
Weathered bedrock is mapped within 60 inches across 19 percent of Gun Barrel City, with a typical depth of 53 inches; hard bedrock is not mapped within that depth. The USDA soil survey maps a seasonal water table within 60 inches across 26 percent and flood prone soils across 4 percent, so pits may need pumping and Prairie Creek calls for depth planning. High steel corrosion risk covers 89 percent. The Wills Point Formation, of Paleocene age, includes clay and limestone, so site conditions can change with depth.
How do crews handle clay when boring in Gun Barrel City?
Axtell and other clay rich mapped soils call for controlled fluid and staged reaming. Near Prairie Creek or a paved Main Street route, we watch returns and keep the open bore from putting pressure on the surface.
- With heavy clay mapped across 87 percent of the area at 40 inches, we use thinner fluid and polymer, then ream in stages to manage sticky cuttings.
- Clay can swell around pipe, so on a Main Street route we arrange the pull soon after the final ream rather than leave the hole open.
- The mapped seasonal water table reaches within 60 inches across 26 percent of the city; small pits and a pump can help where water collects.
- Near Prairie Creek, we plan bore depth below the channel, hydrovac marked utilities, and track the drill head from the surface while logging depth and pitch.

Which roads, tracks or creeks might a Gun Barrel City bore cross near US 175?
US 175 runs 5.4 roadway miles within Gun Barrel City, alongside Texas State Highway 334, FM 85 and Texas State Highway 198. US 175 Business is 1.4 miles outside the limits. The longest named street is Main Street at 8.72 miles, followed by Gun Barrel Lane at 2.38 miles and Harbor Point Road at 1.63 miles. A bore along these routes can pass below pavement and driveways instead of cutting a trench through the traveled surface.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 175 | US highway | 5.4 roadway miles inside | State highway office |
| Texas State Highway 334 | State highway | 7.5 roadway miles inside | State highway office |
| FM 85 | State highway | 4 roadway miles inside | State highway office |
| Texas State Highway 198 | State highway | 2 roadway miles inside | State highway office |
| US 175 Business | Highway nearby | 1.4 miles outside | State highway office |
| Union Pacific | Railroad nearby | 0.6 miles outside | The railroad |
| Prairie Creek | Stream | 0.35 channel miles inside | Checked for Corps of Engineers jurisdiction |
| South Twin Creek | Stream nearby | Along the boundary | Checked for Corps of Engineers jurisdiction |
| North Twin Creek | Stream nearby | 0.1 miles outside | Checked for Corps of Engineers jurisdiction |
| Little Dry Branch | Stream nearby | 0.4 miles outside | Checked for Corps of Engineers jurisdiction |
| Cedar Creek Reservoir | Lake or pond | 23,637 acres, inside | Checked for Corps of Engineers jurisdiction |
| Mabank City Lake | Lake or pond | 28 acres, nearby | Checked for Corps of Engineers jurisdiction |
There is no railroad inside Gun Barrel City; Union Pacific is 0.6 miles beyond the limits. Public mapping shows no street and rail crossings in the city. Prairie Creek runs 0.35 channel miles inside the limits, and no street crossings of named streams are mapped. Cedar Creek Reservoir is inside the city, so a proposed water crossing there needs site specific planning and a check for federal jurisdiction.
Do I need a permit to bore under a road in Henderson County in Gun Barrel City?
For a crossing on US 175, Texas State Highway 334, FM 85 or Texas State Highway 198, the utility owner, not our drilling crew, files for a TxDOT utility permit through RULIS. TxDOT Tyler District reviews it, and we prepare the bore plan and profile for the owner’s application. Existing highway pavement is crossed by boring or tunneling; required cover depends on the line type and crossing. Gun Barrel City is incorporated, so its city streets, including Main Street, are handled by the city. A route reaching Union Pacific track needs an agreement with the railroad, and Prairie Creek is checked for Army Corps jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities need locating before a bore in Henderson County in Gun Barrel City?
Before planning a bore on Main Street, confirm the water provider for that address with Gun Barrel City, Henderson County or the local water district. EPA drinking water records for Texas do not match a provider to each town address. Oncor Electric Delivery Company and Trinity Valley Electric Cooperative report electric service in Henderson County, but the line owner for the specific route must be confirmed before a conduit bore. We hydrovac pothole each marked utility on the path before drilling near it.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Oncor Electric Delivery Company and Trinity Valley Electric Cooperative | Electric utilities reporting service in Henderson County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Gun Barrel City’s median housing year at 1987: 5 percent of homes were built before 1960, 65 percent from 1960 to 1999 and 30 percent in 2000 or later. Work along Main Street may involve replacing an older line or extending a newer service. Either way, we expose marked lines before the drill approaches them.

Do you cover Mabank and nearby places from Gun Barrel City?
Gun Barrel City covers 6.25 square miles in Henderson County, at an elevation of 353 feet, and uses ZIP code 75156. Mabank is 3.3 miles northeast, Tool is 4.1 miles southwest, Enchanted Oaks is 4.5 miles south, Payne Springs is 4.7 miles southeast, and Seven Points is 6.0 miles west. Athens, the county seat, is 19.6 miles southeast; Corsicana is 25.9 miles southwest. The Yukon main office is 277 road miles away, a 5.5 hour drive, which affects planning for work near Main Street or Prairie Creek.
Places near Gun Barrel City
- Directional boring in Mabank: 3.3 miles northeast
- Directional boring in Tool: 4.1 miles southwest
- Directional boring in Enchanted Oaks: 4.5 miles south
- Directional boring in Payne Springs: 4.7 miles southeast
- Directional boring in Seven Points: 6 miles west
- Directional boring in Corsicana: 25.9 miles southwest
What boring work comes up near Main Street in Gun Barrel City?
- Highway crossing: A bore beneath US 175 avoids cutting across its pavement, with the utility owner handling the TxDOT permit.
- Water service: A route along Main Street can carry a service line beneath pavement, after the address specific water provider is confirmed.
- Fiber route: Gun Barrel Lane offers a named corridor for conduit, with marked utilities exposed before the drill approaches them.
- Creek crossing: A proposed Prairie Creek route needs a planned depth below the channel and a jurisdiction check during planning.
- Rail approach: Union Pacific is 0.6 miles outside the limits, so a route that reaches its track needs railroad coordination.
- Reservoir route: Work near Cedar Creek Reservoir needs a location specific crossing plan rather than an assumption about the shoreline or waterway.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for a Gun Barrel City quote near Union Pacific?
A map pin matters because a route near US 175 has different access and crossing details from one near Prairie Creek. Send the address or pin, what will go in the ground, pipe or conduit size and footage. A sketch or plan showing the route, pits and nearby features helps us assess the Main Street alignment.
A short route on Main Street with clear access and no creek or highway crossing is simpler to plan than a longer route through Axtell clay near US 175. Price reflects length, pipe size, soil, exposed utilities, pavement, creek crossings, pit and excavator needs, and sand backfill. The 277 road miles from Yukon shape how we plan mobilization for directional boring work in Gun Barrel City. A route near Union Pacific may add crossing coordination if it reaches the track.
Questions people ask about boring in Gun Barrel City
Does Trinity take directional boring work in Gun Barrel City and Henderson County?
Yes. We take work in Gun Barrel City and across Texas, with the job handled through Trinity from the first call to the bore log. Our crews and vetted partner drilling contractors work from the Yukon office and satellite yards. For a route near Main Street, share the address and line details so we can assess the scope.
Could groundwater or flood prone soil near Prairie Creek affect Gun Barrel City bore pits?
It can affect pit planning. The USDA soil survey maps a seasonal water table within 60 inches across 26 percent of Gun Barrel City and flood prone soils across 4 percent. For a Prairie Creek crossing, we plan depth below the channel; where pits collect water, smaller pits and pumping may be needed.
Does Axtell soil in Gun Barrel City corrode steel, and what pipe can we use?
The soil survey maps high steel corrosion risk across 89 percent of Gun Barrel City, so the line owner should consider casing and tracer wire materials. For Gun Barrel City, HDPE is not affected by that soil corrosion concern, which guides our material planning. Axtell is the most common mapped soil series, but the line owner selects any coating for steel components.
What ground does a bore pass through in Gun Barrel City Axtell soil?
Axtell covers 43 percent of the mapped area, with Derly at 16 percent and Crockett at 13 percent. At about 40 inches, clay makes up 64 percent of mapped texture and clay loam 27 percent. Those USDA soil survey patterns are not test borings, but they indicate sticky material that can build up on a reamer.
How much rock is mapped within five feet of Gun Barrel City ground?
Weathered bedrock is mapped within 60 inches across 19 percent of the city, while hard bedrock is not mapped within that depth. The Wills Point Formation is Paleocene and includes clay and limestone. A bore near Main Street still needs site specific evaluation because mapped conditions do not establish what a particular alignment will encounter.
For our crossing plans, who approves a bore under US 175 in Gun Barrel City?
The utility owner applies for a TxDOT utility permit in RULIS; the driller does not file it. TxDOT Tyler District reviews the application for US 175. We prepare the bore plan and profile for the line owner, and the permit sets the approved conditions for that highway crossing.
What bore sizes and lengths can you handle near Legendary Lane in Gun Barrel City?
We handle work from 3/4 inch service lines through 48 inch casing, with bore lengths from 10 feet to 5,000 feet. A proposed route near Legendary Lane still needs to be scoped for its footage, ground and utility crossings before we select equipment and a drilling plan.
How much 811 notice does a Gun Barrel City bore near Main Street need?
Texas law requires a Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays; Texas811 describes that as two working days. The request cannot be made earlier than 14 days before work. If a Main Street start slips more than 14 days past the original notice, make a new request, and refresh moved or worn marks before continuing.
What affects the cost of our directional bore under US 175 in Gun Barrel City?
The price depends on the route and scope: length, pipe size, Axtell clay, utility exposure, pavement, pits, creek crossings and equipment time all matter. A US 175 crossing also brings highway planning, and a job 277 road miles from Yukon has mobilization to consider. A map pin and route sketch help identify those factors.
Where the Gun Barrel City facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Gun Barrel City
- U.S. Census Bureau, TIGER/Line 2024: Gun Barrel City boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Gun Barrel City
- U.S. Census Bureau, American Community Survey 2019 to 2023: Gun Barrel City housing units and year built
- Macrostrat geologic map compilation: map units under Gun Barrel City
- U.S. Department of Transportation, North American Rail Network: track owners in Henderson County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Henderson County
- U.S. Geological Survey, Elevation Point Query Service: Gun Barrel City elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Gun Barrel City
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Gun Barrel City
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Gun Barrel City, Texas
Type the address of your job in Gun Barrel City. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Gun Barrel City
Same county: Athens · Chandler · Malakoff · Brownsboro · Eustace · Berryville · Log Cabin · Trinidad · Star Harbor · Murchison · Poynor · Coffee City. All counties: Texas county list.
