trinityboringsolutions.com

Hamlin Texas Directional Boring: Rowena Clay Loam, California Creek and US 83

Quick Answer: Can we get your line beneath California Creek without cutting the creek bank? Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), for Hamlin crossings such as US 83. Hamlin is 276 road miles from our Yukon, Oklahoma main office, and Central Avenue is one local route to plan around. Rowena clay loam covers much of the city, so sticky clay can cling to a reamer and needs careful fluid control.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Hamlin bores at a glance

  • Incorporated city in Jones County and Fisher County, Texas. Population 1,875 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 276 miles, about 5.6 hours of driving.
  • Ground: Rowena soil is mapped on 55 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 4 percent of the area.
  • Highways inside the boundary: US 83, Texas State Highway 92, FM 57, FM 2142 and FM 1835. State permit office: TxDOT Abilene District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: California Creek.
  • Public water: City of Hamlin, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring near California Creek in Hamlin?

We take directional boring work in Hamlin, in Jones and Fisher Counties, including routes near California Creek. We treat the Census Bureau Vintage 2024 estimate of 1,875 for Hamlin in Jones County as context, not a measure of underground route needs. We install water, sewer, gas, electric conduit and fiber lines, including service routes along streets such as Avenue A or crossings near US 83.

Our main office is in Yukon, Oklahoma, and Hamlin work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have bored since 1982, bringing four decades of practice to the clay mapped around California Creek. Our family business began in 1965, and we stay involved from the first call through the bore log.

Compact Ditch Witch drill rig boring a new utility line across a front yard on a residential street in Edmond, Oklahoma
Our compact Ditch Witch drill boring a new utility line across a front yard on a residential street in Edmond, Oklahoma. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show beneath Hamlin’s Rowena soil?

The USDA soil survey maps Rowena soil across 55 percent of Hamlin, mainly as Rowena clay loam on nearly level slopes. Pyron clay loam accounts for another 17 percent in the mapped units. At about 40 inches below the surface, the survey maps clay across 57 percent of the area and clay loam across 36 percent; average clay content there is 39 percent. We treat mapped Rowena, Pyron, Sagerton and Acme patterns in Hamlin as planning context, not as test borings. On a route near Central Avenue, sticky clay may build up on the reamer, so the crew needs to control fluid and plan the pull carefully.

USDA soil survey, inside the Hamlin city limitsWhat is mapped
Soil series mappedRowena 55 percent, Pyron 18 percent, Sagerton 8 percent, Acme 6 percent and Spur 5 percent
Texture at the surfaceclay loam 94 percent and loam 6 percent
Texture about 40 inches downclay 57 percent, clay loam 36 percent and gypsiferous loam 6 percent
Engineering class about 40 inches downfat clay (CH) 55 percent and lean clay (CL) 44 percent
Average clay content about 40 inches down39 percent
Bedrock mapped within 60 inches4 percent of the area (0 percent hard rock, 4 percent weathered rock)
Seasonal water table within 60 inches6 percent of the area
Flood prone soils6 percent of the area
High corrosion risk for uncoated steel76 percent of the area

Across most of Hamlin, bedrock is not mapped in the top five feet; the survey maps bedrock within 60 inches in 4 percent of the area. The geologic map shows Quaternary deposits, including sand, silt, clay and gravel, above Permian Guadalupian sedimentary rock. Seasonal water table is mapped within 60 inches in 6 percent, and flood prone soils in 6 percent, so a route near California Creek needs attention to pits and channel depth. High steel corrosion risk covers 76 percent of the area; the line owner should consider casing and tracer wire materials, while HDPE avoids that concern.

How do crews handle clay in Hamlin?

Hamlin’s Rowena and Pyron clay loams can stay in the bore and cling to the reamer. We adjust the fluid and the reaming sequence to suit that mapped ground, then keep the pull coordinated with the open hole.

  1. In Rowena clay loam, we use thinner drilling fluid with polymer and open the hole in stages, helping sticky clay clear the reamer instead of building up on it.
  2. Hamlin’s mapped heavy clay calls for watching fluid returns; too much pressure near pavement on Central Avenue can lift the surface.
  3. Before the drill approaches a marked utility, we hydrovac pothole it to learn its depth; the paint near Avenue A only shows its position.
  4. We track the drill head from above and log depth and pitch as the bore advances, especially where California Creek or mapped drainage affects the route.
Trinity Boring Solutions water trailer supplying water for bentonite drilling fluid on a sleeve bore in northeast OKC
Our water trailer feeding the bentonite drilling fluid mix on a sleeve bore in northeast Oklahoma City.

What does a bore have to cross near Central Avenue in Hamlin?

US 83, Texas State Highway 92, FM 57, FM 2142 and FM 1835 run within Hamlin’s limits. A bore beneath existing highway pavement uses boring or tunneling rather than an open cut. Central Avenue is the city’s longest named street at 2.82 miles, followed by 3rd Street at 2.8 miles and Avenue A at 2.73 miles. Those routes can put pavement, driveways and buried lines in the work area, so the bore path and entry pits need to fit the crossing rather than the whole street.

CrossingTypeMapped extentWho has a say
US 83US highway2.7 roadway miles insideState highway office
Texas State Highway 92State highway3.1 roadway miles insideState highway office
FM 57State highway0.9 roadway miles insideState highway office
FM 2142State highway0.8 roadway miles insideState highway office
FM 1835State highway0.4 roadway miles insideState highway office
California CreekStream3.67 channel miles insideChecked for Corps of Engineers jurisdiction
Moore CreekStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Dry California CreekStream nearby1 miles outsideChecked for Corps of Engineers jurisdiction
West LakeLake or pond111 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Hamlin or within one mile outside its limits, so there is no mapped rail route to plan around. California Creek runs 3.67 channel miles through the city, and public maps show four street crossings of named streams. West Lake covers 111 acres within one mile, outside city limits. A creek or lake route needs a depth plan that stays below the channel, and creek crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning.

Who has to sign off on a bore in Jones County near Hamlin?

For work in Hamlin city streets, the city has authority over its streets; we do not assume a department, form or fee. A bore in the right of way of US 83, Texas State Highway 92 or a farm to market road needs a TxDOT utility permit reviewed by the TxDOT Abilene District. The line owner, not the drilling contractor, files through TxDOT’s RULIS system. We give the owner a bore plan and profile and work under its permit. For electric or communication lines, state rules call for 60 inches of cover at a highway crossing and 48 inches along the right of way. Water lines need 60 inches at crossings and 36 inches along the right of way; pressurized sewer crossings need 60 inches. A California Creek crossing is checked for federal jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities may be near the City of Hamlin system?

The City of Hamlin public water system uses purchased surface water and reports 973 service connections serving 2,164 people. That makes nearby water infrastructure relevant when planning a service route along Avenue A or another street. AEP Texas North, Big Country Electric Cooperative and Taylor Electric Cooperative report electric service in Jones County. Before planning an electric conduit bore along Central Avenue, we confirm the line owner for the specific address.

Line ownerWhat it isSourceSize
City of HamlinPublic water systemSurface water bought from another system973 connections, 2,164 people served
AEP Texas North, Big Country Electric Cooperative and Taylor Electric CooperativeElectric utilities reporting service in Jones County and Fisher CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Hamlin’s median housing year at 1966; 37 percent of homes were built before 1960, 52 percent from 1960 to 1999 and 11 percent in 2000 or later. That mix can mean either replacement work near older streets or a new service connection. Before a bore under Central Avenue, we hydrovac pothole each marked utility on the path; paint shows where a line is, not how deep it sits.

Hydrovac truck and boring equipment staged beside an airport taxiway for utility daylighting in Oklahoma City
Our hydrovac truck and boring equipment beside an airport taxiway in Oklahoma City, set up to expose a utility crossing.

What is near Hamlin, including Sylvester?

Hamlin covers 5.29 square miles in Jones and Fisher Counties, with 83 percent of the city in Jones County and 17 percent in Fisher County. Its elevation is 1,727 feet, and ZIP code 79520 serves the area. McCaulley is 8.8 miles southwest; Sylvester is 13.4 miles southwest; Anson, the Jones County seat, is 16.6 miles southeast. Sweetwater is 33.2 miles southwest. From our Yukon yard, Hamlin is 276 road miles and a 5.6 hour drive, which matters when planning crew mobilization for work along US 83 or California Creek.

Places near Hamlin

What would we bore near Avenue A in Hamlin?

  • Highway crossing: A bore beneath US 83 is planned to pass under the travel lanes without cutting the existing pavement.
  • Water service: A route near the City of Hamlin system can connect a service line while avoiding open trenching across Central Avenue.
  • Fiber conduit: A conduit bore along Avenue A needs a route that accounts for clay loam and the marked lines already underground.
  • Creek crossing: A line beneath California Creek needs a planned depth below the channel and a jurisdiction check during planning.
  • Street crossing: A bore near 5th Street can keep pavement and driveways intact while pits sit on each side of the crossing.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore near 5th Street in Hamlin?

Start with a map pin, because a point near 5th Street can have a different pavement edge or utility crossing than one near California Creek. For a route near US 83, send us what will go underground, along with pipe or conduit size and footage. A sketch or plans help us see the route, access and pit locations before we shape the bore plan.

The job scope drives the price. Hamlin’s Rowena clay loam affects drilling and reaming; the 276 road miles from Yukon affect mobilization. We also consider line size and length, how many utilities need exposure, pavement near Central Avenue, and creek or drainage crossings near California Creek. Entry pits, excavator time, sand backfill and high profile or emergency work can add to the work required.

Questions people ask about boring in Hamlin

Does Trinity Boring Solutions take directional boring jobs in Hamlin and Jones County?

Yes. We take work in Hamlin and across Texas, including routes in Jones County. Our own crews and partner contractor crews from vetted satellite yards handle the drilling, while you work with Trinity from the first call through the bore log. For routes near California Creek, we install water, sewer, gas, electric conduit and fiber lines.

Does Rowena soil in Hamlin create a steel corrosion concern, and what pipe can I use?

The USDA soil survey maps high steel corrosion risk across 76 percent of Hamlin, including much of the Rowena soil area. The line owner should consider appropriate casing and tracer wire materials for the route. HDPE does not share the mapped soil corrosion concern, but the right pipe depends on the line and project requirements.

What ground will a bore pass through in Hamlin’s Rowena soil?

The USDA soil survey maps Rowena clay loam across 55 percent of Hamlin. At about 40 inches down, clay is mapped in 57 percent of the area and clay loam in 36 percent. That texture can be sticky and hold an open hole, so reaming and fluid need to suit the route rather than rely on a general soil assumption.

Will directional boring in Hamlin encounter rock near US 83?

Bedrock is not mapped in the top five feet across most of Hamlin, although it is mapped within 60 inches in 4 percent of the area. The geologic map shows Quaternary deposits at the surface and Permian Guadalupian sedimentary rock below. A route near California Creek still needs site specific planning because the map is not a test boring.

Who approves a bore under US 83 in Hamlin, and which TxDOT office reviews it?

The line owner applies for the utility permit through TxDOT’s RULIS system, and the TxDOT Abilene District reviews a US 83 right of way job. We provide the bore plan and profile for the owner’s filing and work under its permit. The permit sets the allowed route and can specify a different depth from standard cover.

Can a line be bored under California Creek in Hamlin?

A bore can be planned beneath California Creek, which runs 3.67 channel miles through Hamlin. The route needs a depth plan that stays under the channel, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. Soil, bank access and the entry and exit pits also shape the approach.

Can I reach Trinity after hours about an urgent bore near Avenue A in Hamlin?

Yes. Call (405) 409-7423; a person answers 24 hours a day. We provide 24 hour emergency response, including for urgent work near Avenue A. Sharing the location, line type and what is affected helps us understand the call and discuss the next step.

How early should I call Texas811 before a bore near Central Avenue in Hamlin?

Call Texas811 at least 48 hours before excavation begins, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before the start. On a Texas State Highway 92 schedule, we allow the at least two working days Texas811 describes. If a Central Avenue start slips more than 14 days past the original notice, submit a new request; refresh marks that wear off or move before work continues.

What affects the cost of directional boring under US 83 in Hamlin?

The price depends on the actual route and scope, not one fixed measure. For a US 83 crossing, length, pipe size, soil conditions, pavement and the number of utilities to expose all matter. Creek or drainage crossings, pits, excavator time, sand backfill and high profile or emergency work can also change what the job requires.

Where the Hamlin facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Hamlin

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Hamlin, Texas

Type the address of your job in Hamlin. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Hamlin

Same county: Abilene · Stamford · Hawley · Lueders. All counties: Texas county list.