Kaufman Texas Directional Boring: Wilson Soil, US 175 and Kings Creek
Quick Answer: Wilson soil and Kaufman clay can hold a bore open, but sticky cuttings can build on the reamer. We do directional boring, also called horizontal directional drilling (HDD), in Texas for routes under Kaufman streets and Kings Creek. Kaufman is 253 road miles from our Yukon, Oklahoma main office, and US 175 is one local route to plan around. At about 40 inches, clay is mapped across 86 percent of the area, so we manage fluid and ream in stages.
Kaufman bores at a glance
- County seat of Kaufman County, Texas. Population 9,785 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 253 miles, about 5 hours of driving.
- Ground: Wilson soil is mapped on 28 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 22 percent of the area.
- Highways inside the boundary: US 175, Texas State Highway 34, Texas State Highway 243, FM 1836 and FM 1388. State permit office: TxDOT Dallas District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Kings Creek, Prairie Branch, Big Brushy Creek and Little Brushy Creek.
- Public water: City of Kaufman, surface water bought from another system.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who handles directional boring near Kings Creek in Kaufman?
Wilson soil and Kaufman clay can hold an open bore, though sticky cuttings need attention during reaming. We take directional boring work in Kaufman, the Kaufman County seat, where the Census Bureau Vintage 2024 estimate puts the population at 9,785. Along Washington Street, US 175 or Kings Creek, we can install water, sewer, gas, electric conduit and fiber without cutting across the route.
Our main office is in Yukon, Oklahoma, and Kaufman work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business started in 1965, with directional boring work dating to 1982. Our no utility strike record of over 25 years matters around the City of Kaufman water lines and electric lines whose owners must be confirmed.

What is Wilson soil like to bore in Kaufman?
Wilson is the leading mapped soil series in Kaufman at 28 percent, followed by Burleson at 16 percent and Kaufman soil at 12 percent. The USDA soil survey maps clay across 86 percent of the area at about 40 inches below the surface, with average clay content of 47 percent at that depth. At the surface, clay accounts for 38 percent and silt loam for 26 percent. Wilson, Burleson, Kaufman, and Crockett soil patterns guide our boring plans, but mapped soils are not a substitute for test borings. Sticky clay can ball up on a reamer and grip pipe.
| USDA soil survey, inside the Kaufman city limits | What is mapped |
|---|---|
| Soil series mapped | Wilson 28 percent, Burleson 16 percent, Kaufman 12 percent, Crockett 11 percent and Mabank 7 percent |
| Texture at the surface | clay 38 percent, silt loam 26 percent and fine sandy loam 21 percent |
| Texture about 40 inches down | clay 86 percent, sandy clay loam 10 percent and clay loam 3 percent |
| Engineering class about 40 inches down | fat clay (CH) 57 percent and lean clay (CL) 42 percent |
| Average clay content about 40 inches down | 47 percent |
| Bedrock mapped within 60 inches | 22 percent of the area (0 percent hard rock, 22 percent weathered rock) |
| Seasonal water table within 60 inches | 11 percent of the area |
| Flood prone soils | 20 percent of the area |
| High corrosion risk for uncoated steel | 91 percent of the area |
The USDA soil survey maps weathered bedrock within 60 inches across 22 percent of Kaufman; hard bedrock is not mapped at that depth. A seasonal water table is mapped within 60 inches across 11 percent, and flood prone soils cover 20 percent, so pits and creek routes need attention. High steel corrosion risk is mapped across 91 percent, which makes casing and tracer wire material a line owner concern; HDPE is not affected by soil corrosion. The geologic map names Kemp clay and Corsicana Marl, undivided, of Maastrichtian age.
How do crews handle clay when boring in Kaufman?
Kaufman’s mapped clay is sticky and can grip a pipe or load a reamer. We adjust the drilling fluid and open the hole in stages, with Kings Creek routes and the mapped seasonal water table considered in the setup.
- With Kaufman’s heavy clay mapped at depth, we use a thinner fluid mix and polymer to limit sticky cuttings that can coat the reamer.
- For Wilson and Kaufman clay, we open the bore in stages and have the pipe ready so it can be pulled after the final ream.
- Near Kings Creek, mapped flood prone soils call for a route planned below the channel, with creek jurisdiction checked during planning.
- Where Kaufman’s seasonal water table may affect entry or exit pits, we keep pits small and pump water if they fill.

Where does a line have to go under US 175 in Kaufman?
US 175, Texas State Highway 34 and Texas State Highway 243 run within Kaufman, along with FM 1836, FM 1388 and other farm roads. Those routes can make an underground crossing preferable to cutting pavement. Washington Street is the city’s longest named street at 3.64 miles; Fair Street runs 2.49 miles, and Houston Street runs 2.33 miles. Jefferson Street is another 1.42 mile route. A proposed alignment on any of them needs its own utility and access review.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 175 | US highway | 19.9 roadway miles inside | State highway office |
| Texas State Highway 34 | State highway | 14.8 roadway miles inside | State highway office |
| Texas State Highway 243 | State highway | 4.3 roadway miles inside | State highway office |
| FM 1836 | State highway | 1.8 roadway miles inside | State highway office |
| FM 1388 | State highway | 1.4 roadway miles inside | State highway office |
| FM 987 | State highway | 0.8 roadway miles inside | State highway office |
| FM 2578 | State highway | 0.4 roadway miles inside | State highway office |
| FM 1390 | State highway | 0.2 roadway miles inside | State highway office |
| FM 2727 | State highway | 0.2 roadway miles inside | State highway office |
| Kings Creek | Stream | 2.56 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Prairie Branch | Stream | 2.13 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Big Brushy Creek | Stream | 0.71 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Little Brushy Creek | Stream | 0.32 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Kaufman Branch | Stream | 0.22 channel miles inside | Checked for Corps of Engineers jurisdiction |
No railroad or street and rail crossing is mapped within Kaufman’s limits. Kings Creek runs 2.56 channel miles in the city, and Prairie Branch runs 2.13 miles; 11 street crossings of named streams are mapped. Big Brushy Creek, Little Brushy Creek and Kaufman Branch are also within the limits. Kaufman City Lakes are mapped inside the city, while Kaufman Lake is outside it but within one mile. Creek or lake routes need a jurisdiction check during planning.
Who has to sign off on a bore in Kaufman County?
The cover depth sets the path beneath US 175: electric and communication lines need 60 inches below the lowest crossed grade, while water lines need 60 inches and pressurized sewer lines need 60 inches at a crossing. TxDOT’s Utility Accommodation Rules also set cover for lines running along highway right of way, and the district may require a different depth. The line owner, not our crew, applies through TxDOT’s RULIS system; the TxDOT Dallas District reviews it. For a Kaufman County filing, we provide the bore plan and profile to support review of the proposed crossing. Kaufman is incorporated, so city streets such as Washington Street belong to the city. Kings Creek crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What is already in the ground near the City of Kaufman water system?
The City of Kaufman public water system uses purchased surface water and reports 5,864 service connections serving 7,125 people. For an electric conduit route near that system or US 175, the line owner has to be confirmed for the particular address. Oncor Electric Delivery Company, Farmers Electric Cooperative and Trinity Valley Electric Cooperative report electric service in Kaufman County; those reports do not identify the provider at every Washington Street address.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Kaufman | Public water system | Surface water bought from another system | 5,864 connections, 7,125 people served |
| Oncor Electric Delivery Company, Farmers Electric Cooperative and Trinity Valley Electric Cooperative | Electric utilities reporting service in Kaufman County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates place Kaufman’s median housing year at 1977, so we assess each bore site individually. It estimates 11 percent of homes were built before 1960, 69 percent from 1960 to 1999 and 20 percent in 2000 or later. That mix can mean replacement routes as well as new service work near Jefferson Street. Before drilling across a marked water or electric line, we hydrovac pothole it to see its depth; surface paint alone does not show depth.

What is near Kaufman, including Post Oak Bend?
Kaufman is the county seat of Kaufman County, at an elevation of 461 feet, with 9.74 square miles inside its city limits. We use Kaufman’s ZIP codes, 75142 and 75158, as location references, then confirm the proposed bore site before planning. Oak Grove is 3.1 miles south, Post Oak Bend is 3.9 miles north, Oak Ridge is 4.3 miles northeast, Scurry is 6.1 miles southwest and Grays Prairie is 7.5 miles south. Terrell, the nearest larger city, is 10.3 miles north. From our Yukon yard, the drive is 253 road miles and 5.0 hours, which affects mobilization for a Kaufman job.
Places near Kaufman
- Directional boring in Oak Grove: 3.1 miles south
- Directional boring in Post Oak Bend: 3.9 miles north
- Directional boring in Oak Ridge: 4.3 miles northeast
- Directional boring in Scurry: 6.1 miles southwest
- Directional boring in Grays Prairie: 7.5 miles south
- Directional boring in Terrell: 10.3 miles north
What kinds of bores come up around Washington Street in Kaufman?
- Highway crossing: A route beneath US 175 can keep the existing pavement intact, with cover set under TxDOT requirements.
- Water service: A new or replacement line near the City of Kaufman system can be bored beneath a street rather than cut across it.
- Fiber conduit: A Washington Street route can carry conduit below pavement, with marked utilities exposed before drilling near them.
- Creek crossing: A Kings Creek bore can pass under the channel and banks, with depth and jurisdiction considered in planning.
- Drainage route: Near Prairie Branch, the bore path can be planned below the channel instead of opening the ground across it.
- Street service: A Jefferson Street connection can use entry and exit pits in dirt to avoid cutting a driveway or sidewalk.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of boring near Jefferson Street in Kaufman?
A map pin matters on Jefferson Street because the exact entry and exit points show whether a proposed line meets pavement, a marked utility or a drainage route. For a Kaufman quote, send the address or pin, what is going underground, the pipe or conduit size and the footage. A sketch or plans help us assess the route before we set the bore scope.
Kaufman pricing reflects the job, starting with the 253 road mile trip from Yukon and the clay that can slow reaming or grip pipe. The route matters too: a crossing under US 175, pavement on Washington Street, or a Kings Creek approach changes the work. Pipe size and length, utilities to expose, concrete, pits, excavator time and sand backfill also affect the scope. High profile or emergency work can add demands.
Questions people ask about boring in Kaufman
Does Trinity Boring Solutions take directional boring work in Kaufman County, and who staffs it?
Yes. We take directional boring work in Kaufman County, and our own crews handle the work alongside crews from vetted partner drilling contractors. The Yukon main office remains the point of contact from the first call through the bore log, whether the route is near US 175 or Kings Creek.
Can Wilson soil in Kaufman corrode steel pipe, and what pipe should I use?
The USDA soil survey maps high steel corrosion risk across 91 percent of Kaufman, including areas with Wilson soil. The line owner should consider casing and tracer wire materials for the project. HDPE is not affected by soil corrosion, but the owner selects materials and any coating for steel.
What ground does a bore pass through in Kaufman near Wilson soil?
Wilson is mapped across 28 percent of Kaufman, and clay is mapped under about 86 percent of the area at about 40 inches. Average clay content at that depth is 47 percent. That sticky ground can build on a reamer, so staged reaming and fluid control matter for routes such as Washington Street.
Is there rock close to the surface on a Kaufman bore?
Weathered bedrock is mapped within five feet across 22 percent of Kaufman, while hard bedrock is not mapped within that depth. That does not rule out rock deeper down. The map names Kemp clay and Corsicana Marl, undivided, so the actual route still needs site specific planning.
Should we contact the TxDOT Dallas District for a bore permit under US 175 in Kaufman?
The utility owner applies for the TxDOT utility permit through RULIS; the TxDOT Dallas District reviews it. For US 175, TxDOT cover rules affect how deep the line runs, and the district can require another depth in the permit. We prepare the bore plan and profile for the owner’s application.
Can a line be bored under Kings Creek in Kaufman?
Yes, a bore can be planned beneath Kings Creek, which runs 2.56 channel miles within Kaufman. The route needs enough depth to stay below the channel, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. Flood prone soils are mapped across 20 percent of the city.
How much 811 notice do I need for a bore on Washington Street in Kaufman?
The person arranging the Washington Street excavation contacts Texas811 at least 48 hours before work, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. Texas811 describes this as two working days. If the start slips beyond the notice window, make a new request; worn or moved marks must be refreshed before work continues.
Does Terrell’s proximity change the cost of boring in Kaufman from Yukon?
Terrell is 10.3 miles north of Kaufman, but our main office is in Yukon, 253 road miles away. That distance can affect mobilization for a Kaufman job. The route, clay, pipe size, footage, crossings and site access also shape the work, including a proposed crossing near US 175.
What affects the cost of directional boring under US 175 in Kaufman?
The job scope determines the price. A US 175 crossing brings highway planning into the estimate, while Kaufman’s clay can affect reaming and drilling time. Pipe size and length, marked utilities that need potholing, pavement, creek or drainage crossings, entry pits, excavator time, backfill and mobilization from Yukon are also considered.
Where the Kaufman facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Kaufman
- U.S. Census Bureau, TIGER/Line 2024: Kaufman boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Kaufman
- U.S. Census Bureau, American Community Survey 2019 to 2023: Kaufman housing units and year built
- Macrostrat geologic map compilation: map units under Kaufman
- U.S. EPA Safe Drinking Water Information System: public water systems serving Kaufman
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Kaufman County
- U.S. Geological Survey, Elevation Point Query Service: Kaufman elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Kaufman
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Kaufman
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Kaufman, Texas
Type the address of your job in Kaufman. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Kaufman
Same county: Forney · Crandall · Mabank · Talty · Travis Ranch · Combine · Kemp · Elmo · Poetry · Rosser · Cottonwood · Heartland. All counties: Texas county list.
