trinityboringsolutions.com

Rosser Texas Directional Boring: Styx Soil, Texas State Highway 34, Cottonwood Creek

Quick Answer: For a utility route beneath Texas State Highway 34, Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), in Rosser, Texas. Main Street and Kaufman Street are part of Rosser’s 18.42 public road miles, and our Yukon main office is 261 road miles away. Styx soil and clay deeper down can cling to a reamer, so the bore needs staged enlargement and controlled fluid. A route toward Scurry starts with a site specific review of the planned path.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Rosser bores at a glance

  • Incorporated city in Kaufman County, Texas. Population 390 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 261 miles, about 5.3 hours of driving.
  • Ground: Styx soil is mapped on 39 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Texas State Highway 34 and FM 2451. State permit office: TxDOT Dallas District.
  • Railroad track inside the boundary: none mapped.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring on Rosser Main Street?

Rosser is an incorporated town in Kaufman County, where the Census Bureau Vintage 2024 estimate puts the population at 390. We install water and sewer lines along streets such as Main Street, and gas, electric conduit or fiber can follow routes along Kaufman Street or Texas State Highway 34. The line type and marked utilities help determine the bore path.

Our main office is in Yukon, Oklahoma, and Rosser work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For routes near Main Street, our family business began in 1965 and has done directional boring since 1982. From a 3/4 inch service line to 48 inch casing, we size work for routes such as those along Texas State Highway 34.

Trinity Boring Solutions branded compact directional drilling unit positioned beside a tree on a red dirt jobsite
Our compact directional drill set up beside a tree on a tight site. Photos on this page are from our jobs in Oklahoma and Texas.

How does Rosser Styx soil affect a bore?

The USDA soil survey maps Styx as the leading soil series, covering 39 percent of Rosser. At about 40 inches below the surface, clay is mapped across 54 percent of the area, with average clay content of 37 percent at that depth. Surface texture is loamy fine sand across 43 percent, but deeper clay is a key consideration for a bore. Heavy clay is mapped in 56 percent at 40 inches; in those areas, sticky cuttings may collect on reamers and grip the product pipe.

USDA soil survey, inside the Rosser city limitsWhat is mapped
Soil series mappedStyx 39 percent, Wilson 18 percent, Lufkin 14 percent, Mabank 6 percent and Axtell 5 percent
Texture at the surfaceloamy fine sand 43 percent, fine sandy loam 26 percent and silt loam 18 percent
Texture about 40 inches downclay 54 percent and sandy clay loam 43 percent
Engineering class about 40 inches downlean clay (CL) 51 percent, fat clay (CH) 44 percent and clayey sand (SC) 4 percent
Average clay content about 40 inches down37 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches53 percent of the area
Flood prone soils2 percent of the area
High corrosion risk for uncoated steel80 percent of the area

Across Rosser, bedrock is not mapped in the top five feet, although that does not rule out rock at greater depth. The USDA soil survey maps a seasonal water table within 60 inches across 53 percent of the area, so pits may need pumping. Flood prone soils cover 2 percent. High steel corrosion risk is mapped across 80 percent, a factor for casing and tracer wire material choices. The mapped Alluvial gravel, sand, silt, and clay unit is Pleistocene age, with finer material above coarser deposits; that change can affect drilling and fluid returns.

How do we bore through Rosser clay?

Rosser’s Styx soil and clay mapped at about 40 inches call for a plan that controls sticky cuttings and fluid pressure. We adapt the bore to the marked route and the ground we encounter.

  1. In Rosser’s mapped heavy clay, we use thinner drilling fluid with polymer and enlarge the hole in stages to limit sticky cuttings on the reamer.
  2. Where clay is mapped at about 40 inches on a Main Street route, we keep fluid returns under watch so pressure does not lift pavement.
  3. With a seasonal water table mapped within 60 inches across 53 percent of Rosser, we keep pits small and pump water if they fill.
  4. Before a bore near Texas State Highway 34, we hydrovac marked utilities on the path, then track the drill head and log its depth and pitch.
Trinity Boring Solutions water trailer supplying water for bentonite drilling fluid on a sleeve bore in northeast OKC
Our water trailer feeding the bentonite drilling fluid mix on a sleeve bore in northeast Oklahoma City.

What does a bore have to cross in Rosser on Texas State Highway 34?

Texas State Highway 34 accounts for 4.3 mapped roadway miles in Rosser, while FM 2451 adds 1.2. Where a utility must pass beneath existing highway pavement, TxDOT rules call for boring or tunneling rather than an open trench. Main Street is the longest named street at 2.53 miles, followed by Kaufman Street at 1.01 miles; Church Street and Railroad Street each measure 0.49 miles. Those street lengths help identify a route, but the actual crossing plan depends on the address and marked utilities.

CrossingTypeMapped extentWho has a say
Texas State Highway 34State highway4.3 roadway miles insideState highway office
FM 2451State highway1.2 roadway miles insideState highway office
Old Channel East Fk Trinity RiverStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Cottonwood CreekStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Coal Iron CreekStream nearby0.8 miles outsideChecked for Corps of Engineers jurisdiction
Rosser-Trinidad LakeLake or pond45 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Rosser or within one mile of its limits, and no street and rail crossings are mapped in town. No named stream runs inside the limits either. Old Channel East Fk Trinity River is 0.1 miles from the boundary, with Cottonwood Creek 0.7 miles away and Coal Iron Creek 0.8 miles away; no mapped street crosses a named stream inside town. Rosser-Trinidad Lake, a 45 acre lake, is outside the limits but within one mile.

Who permits a Rosser bore in Kaufman County?

Rosser is incorporated, so its streets, including Main Street and Church Street, are city streets. A job in the right of way of Texas State Highway 34 or FM 2451 needs a TxDOT utility permit, reviewed by the TxDOT Dallas District. The utility that owns the line submits the application through TxDOT’s online RULIS system; we prepare the bore plan and profile and work under the permit issued to that owner. If a proposed route reaches Old Channel East Fk Trinity River, planning checks whether the crossing falls under U.S. Army Corps of Engineers jurisdiction. No railroad is mapped in or within one mile of Rosser.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose buried lines should we check in Rosser, Kaufman County?

The water provider for a specific Rosser address needs confirmation with the city, Kaufman County or the local water district before a bore is planned. Electric service reported in Kaufman County includes Oncor Electric Delivery Company, Farmers Electric Cooperative and Trinity Valley Electric Cooperative, but that does not establish which one serves each address. Before planning an electric conduit route along Main Street, we confirm the line owner and its conduit specifications.

Line ownerWhat it isSourceSize
Oncor Electric Delivery Company, Farmers Electric Cooperative and Trinity Valley Electric CooperativeElectric utilities reporting service in Kaufman CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Rosser’s median housing year at 1986; 7 percent of homes were built before 1960, 78 percent from 1960 to 1999 and 15 percent in 2000 or later. Those figures describe housing, not the age of lines along Kaufman Street. A replacement bore may follow older buried services, while new construction needs its own route review. We hydrovac pothole marked utilities before drilling near them because paint shows position, not depth.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

Do you cover Rosser and Scurry?

Rosser is in Kaufman County, at an elevation of 355 feet, with 1.91 square miles of land. We use Rosser ZIP codes 75157 and 75158 to confirm whether a request near Cottonwood Creek covers the intended work area. Cottonwood is 3.0 miles east; Scurry is 5.4 miles northeast; Grays Prairie is 6.0 miles east; Bristol is 6.8 miles west; and Oak Grove is 9.3 miles northeast. Kaufman, the county seat and nearest larger city, is 11.5 miles northeast. From our Yukon yard, Rosser is 261 road miles and a 5.3 hour drive, a distance to consider when planning a Main Street job.

Places near Rosser

What kinds of bores fit Rosser Church Street?

  • Highway crossing: A route beneath Texas State Highway 34 is bored under the pavement, with the utility owner arranging the TxDOT right of way permit.
  • Water service: A service along Main Street starts with confirming the provider for that address and locating buried lines on the route.
  • Fiber drop: A fiber conduit near Kaufman Street can be installed underground without cutting the street surface along the bore path.
  • Creek crossing: A proposed route near Old Channel East Fk Trinity River needs planning for channel depth and a check for federal jurisdiction.
  • Electric conduit: A conduit route near Church Street starts by confirming which Kaufman County electric line owner serves the address.
  • Replacement bore: Work near Railroad Street can replace an existing service after marked utilities are exposed and the new route is checked.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a Rosser bore near Railroad Street?

For a quote near Railroad Street, start with the address or map pin, then tell us what is going underground. Include pipe or conduit size and the footage. A sketch showing how the route meets Main Street or Texas State Highway 34 helps us understand the crossing and access points.

A bore’s price reflects the work involved, not just its length. Styx soil and clay can affect reaming and fluid needs; a crossing beneath Texas State Highway 34 brings right of way planning into the scope. We also consider pipe size, other utilities to expose, pavement or concrete, pits, excavator time, sand backfill and creek or drainage crossings. The 261 road miles from Yukon can affect mobilization for a Rosser job.

Questions people ask about boring in Rosser

Does Trinity take directional boring jobs in Rosser, Kaufman County?

Yes. We take directional boring work in Rosser, and our own crews or crews from partner drilling contractors we have vetted may staff the job. You work with Trinity throughout the project, from the first call to the bore log, whether the route is near Main Street or elsewhere in Kaufman County.

Does TxDOT Dallas District approve a bore under Texas State Highway 34 in Rosser?

TxDOT reviews the utility permit for work in the right of way of Texas State Highway 34 in Rosser through its Dallas District. The utility that owns the line files in TxDOT’s online RULIS system. We prepare the bore plan and profile for the owner’s permit application.

Can a line be bored under Old Channel East Fk Trinity River near Rosser?

A bore may be planned for a route near Old Channel East Fk Trinity River, which is 0.1 miles from Rosser’s limits. The channel and route need site review, and planning checks whether the crossing falls under U.S. Army Corps of Engineers jurisdiction.

Which electric company owns the lines at a Rosser address in Kaufman County?

The county reports Oncor Electric Delivery Company, Farmers Electric Cooperative and Trinity Valley Electric Cooperative as electric service providers. That does not identify the line owner at every Rosser address. We confirm the owner and its conduit specifications before planning an electric bore near Kaufman Street.

Does the city control Church Street in Rosser, and must a bore cut it?

Rosser is incorporated, so Church Street is a city street. Directional boring can pass below a street without opening a trench through its surface; the bore still needs a route plan that accounts for marked utilities and site access near Church Street.

What do Rosser’s housing age and Kaufman Street mean for replacing buried lines?

Rosser’s median housing year is 1986, according to the American Community Survey 2019 to 2023 five year estimates. Housing age does not establish the age of a line along Kaufman Street, so we check the actual route. Marked utilities are exposed by hydrovac potholing before drilling near them.

What bore sizes and lengths can Trinity handle near Rosser Railroad Street?

For a route near Railroad Street, we handle lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. The suitable size and length depend on what the project needs to carry and the crossing plan.

How early should I call Texas811 for a Rosser bore near Main Street?

For a bore along Main Street, Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If a bore start on FM 2451 slips more than 14 days past the original notice, we submit a new request. Before work continues near Railroad Street, we have worn or moved marks refreshed through Texas811.

What affects the cost of a Rosser bore under Texas State Highway 34?

The route length, pipe or conduit size, Rosser’s clay, utilities to expose and pavement all affect the job scope. A crossing under Texas State Highway 34 also involves highway right of way planning. Pits, excavator time, drainage crossings and mobilization from Yukon can add work.

Where the Rosser facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Rosser

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Rosser, Texas

Type the address of your job in Rosser. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Rosser

Same county: Forney · Terrell · Crandall · Mabank · Talty · Travis Ranch · Combine · Oak Ridge · Kemp · Post Oak Bend · Elmo · Poetry. All counties: Texas county list.