trinityboringsolutions.com

Kemp Texas Directional Boring: Wilson Soil, US 175 and Center City Ditch

Quick Answer: We handle directional boring, also called horizontal directional drilling (HDD), in Kemp, Texas, including routes beneath US 175. Kemp is 264 road miles from our Yukon, Oklahoma main office, so mobilization matters for work near Elm Street. USDA maps show heavy clay around Kemp; sticky clay can build on a reamer and grip pipe, so we plan staged reaming and a same day pull. Center City Ditch also calls for a route that leaves the channel and banks uncut.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Kemp bores at a glance

  • Incorporated city in Kaufman County, Texas. Population 1,414 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 264 miles, about 5.2 hours of driving.
  • Ground: Wilson soil is mapped on 20 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 19 percent of the area.
  • Highways inside the boundary: US 175, US 175 Business, Texas State Highway 274, FM 1895 and FM 148. State permit office: TxDOT Dallas District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Center City Ditch.
  • Public water: City of Kemp, surface water.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for Kemp directional boring near Center City Ditch?

Kemp is 264 road miles from our Yukon yard, and we staff work with our own crews and vetted partner contractor yards. Trinity Boring Solutions takes directional boring requests across Texas, including routes near Center City Ditch. The Census Bureau Vintage 2024 estimate puts Kemp at 1,414 people. We install water, sewer, gas, electric conduit and fiber along places such as Elm Street and US 175.

Our main office is in Yukon, Oklahoma, and Kemp work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have had no utility strike in over 25 years, and our family business has done directional boring since 1982. In Kemp, that record matters when planning around City of Kemp water lines and electric service reported in Kaufman County.

Compact Ditch Witch drill rig boring a new utility line across a front yard on a residential street in Edmond, Oklahoma
Our compact Ditch Witch drill boring a new utility line across a front yard on a residential street in Edmond, Oklahoma. Photos on this page are from our jobs in Oklahoma and Texas.

How does Kemp’s Wilson soil affect a bore?

The USDA soil survey maps Wilson silt loam across 15 percent of Kemp, alongside Houston Black, Burleson and Mabank soils. Surface texture is clay across 58 percent of the city. At about 40 inches below the surface, the survey maps clay across 94 percent of the area and estimates average clay content at 49 percent. Our mapped Wilson and Houston Black soil patterns guide bore planning, but they do not replace test borings. Heavy clay can cling to a reamer and swell around pipe, so the actual route needs to guide the drilling plan.

USDA soil survey, inside the Kemp city limitsWhat is mapped
Soil series mappedWilson 20 percent, Houston Black 17 percent, Burleson 15 percent, Ferris 15 percent and Mabank 12 percent
Texture at the surfaceclay 58 percent, silt loam 19 percent and fine sandy loam 17 percent
Texture about 40 inches downclay 94 percent and clay loam 4 percent
Engineering class about 40 inches downfat clay (CH) 66 percent and lean clay (CL) 33 percent
Average clay content about 40 inches down49 percent
Bedrock mapped within 60 inches19 percent of the area (0 percent hard rock, 19 percent weathered rock)
Seasonal water table within 60 inches5 percent of the area
Flood prone soils11 percent of the area
High corrosion risk for uncoated steel94 percent of the area

The survey maps weathered bedrock within five feet across 19 percent of Kemp, but hard bedrock is not mapped in that depth. Seasonal water tables are mapped within five feet across 5 percent, and flood prone soils across 11 percent. High steel corrosion risk covers 94 percent, so the line owner should consider casing and tracer wire materials; HDPE does not share that concern. The geologic map names Kemp clay and Corsicana Marl, undivided, of Maastrichtian age, so we plan for clay with possible slower drilling where weathered rock occurs.

How do we run a Kemp bore through clay?

Kemp’s clay surface and clay rich ground at about 40 inches call for control of the drilling fluid and the reamer. We adjust the plan to the route, including Center City Ditch or US 175.

  1. Heavy clay is common around Kemp, so we use a thinner drilling fluid with polymer and open the hole in stages to limit clay buildup on the reamer.
  2. Clay can tighten around pipe, so for a route near Wilson soil we plan to pull the pipe the same day the hole is opened.
  3. At US 175 or an Elm Street pavement crossing, we keep fluid pressure controlled to reduce the chance of lifting the surface.
  4. For a route near Center City Ditch, we plan depth below the channel and check during planning whether the crossing falls under U.S. Army Corps of Engineers jurisdiction.
Walkover locator at the edge of the wetland on a directional bore at the Cimarron site in Logan County, Oklahoma
Walkover locator at the edge of a wetland on a directional bore in Logan County, Oklahoma.

What does a Kemp bore have to cross near US 175?

US 175, US 175 Business, Texas State Highway 274, FM 1895, FM 148, FM 1391 and FM 2860 are mapped within Kemp. A route under existing highway pavement needs boring or tunneling rather than an open cut. Elm Street is the longest named street at 3.08 miles in the city, followed by Commerce Street at 1.2 miles and 9th Street at 1.13 miles. Those roads give a starting point for discussing alignment, access and pavement crossings.

CrossingTypeMapped extentWho has a say
US 175US highway14.7 roadway miles insideState highway office
US 175 BusinessUS highway3.1 roadway miles insideState highway office
Texas State Highway 274State highway3.3 roadway miles insideState highway office
FM 1895State highway1.7 roadway miles insideState highway office
FM 148State highway1 roadway miles insideState highway office
FM 1391State highway1 roadway miles insideState highway office
FM 2860State highway0.1 roadway miles insideState highway office
Center City DitchStream0.16 channel miles insideChecked for Corps of Engineers jurisdiction
Kings CreekStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Little Cottonwood CreekStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Cedar Creek ReservoirStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Cedar Creek ReservoirLake or pond9,267 acres, insideChecked for Corps of Engineers jurisdiction
City LakeLake or pond35 acres, nearbyChecked for Corps of Engineers jurisdiction
Lake HarveyLake or pond4 acres, insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Kemp or within one mile outside its limits, and no street and rail crossing is mapped. Center City Ditch runs 0.16 channel miles in the city, with three mapped street crossings of named streams. Kings Creek touches or runs along the boundary, while Little Cottonwood Creek is 0.2 miles away. Cedar Creek Reservoir and Lake Harvey are also mapped nearby, so a water crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Whose permission does a Kemp bore in Kaufman County need?

Kemp is an incorporated city, so its city streets belong to the city itself. For work in the right of way of US 175, Texas State Highway 274, or a farm to market road, the line owner applies for a TxDOT utility permit through RULIS; the TxDOT Dallas District reviews it. We prepare the bore plan and profile for the owner’s filing and work under the permit issued to that owner. At highway crossings, electric, communication and water lines need 60 inches of cover, while pressurized sewer lines need 60 inches. TxDOT rules also require boring or tunneling beneath existing highway pavement.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

In Kaufman County, we verify who owns utility lines near the City of Kemp water system before boring?

The City of Kemp public water system uses surface water and reports 990 service connections serving 1,283 people. That gives a local water system to identify when planning a service route off Elm Street or across another marked utility. Oncor Electric Delivery Company, Farmers Electric Cooperative and Trinity Valley Electric Cooperative report electric service in Kaufman County. The line owner for the specific address is confirmed before planning an electric conduit bore.

Line ownerWhat it isSourceSize
City of KempPublic water systemSurface water990 connections, 1,283 people served
Oncor Electric Delivery Company, Farmers Electric Cooperative and Trinity Valley Electric CooperativeElectric utilities reporting service in Kaufman CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The survey places Kemp’s median housing year at 1977, and we verify existing utilities before choosing a bore path. Kemp’s survey puts 23 percent of homes built before 1960, 60 percent from 1960 to 1999 and 17 percent in 2000 or later; we verify utilities before boring. That mix can mean replacing older lines as well as adding new services near 9th Street. Before drilling near the City of Kemp water system or an electric line, we hydrovac expose marked utilities; paint shows position, not depth.

Trinity Boring Solutions technician hydrovac daylighting along a commercial curbline during utility locating in Oklahoma City
Hydrovac daylighting along a commercial curb line in Oklahoma City to find the utilities before a bore.

Where is Kemp in relation to Mabank and our Yukon yard?

Kemp is in Kaufman County, at an elevation of 363 feet, and covers 2.22 square miles. Its ZIP code is 75143. Seven Points is 6.8 miles south, Grays Prairie is 7.7 miles west, and Mabank is 8.2 miles southeast. Mabank is the nearest larger city, while Kaufman, the county seat, is 10.9 miles northwest. From our Yukon, Oklahoma yard, Kemp is 264 road miles away and about a 5.2 hour drive. That distance is part of planning a crew mobilization for work near US 175.

Places near Kemp

Which Kemp jobs call for a bore near 9th Street?

  • Highway crossing: A route beneath US 175 or Texas State Highway 274 is planned as a bore under existing pavement, with the utility owner handling the TxDOT permit.
  • Water service: A service route near Elm Street can connect toward the City of Kemp system after the address and existing marked lines are checked.
  • Fiber conduit: A conduit run along 9th Street can pass below pavement without cutting the street surface, with marked utilities exposed first.
  • Creek crossing: A route at Center City Ditch is planned beneath the channel, with its banks left uncut and jurisdiction checked during planning.
  • Drainage crossing: An alignment near Kings Creek needs depth and access planning around the stream along or touching Kemp’s boundary.
  • Park service: A route near Kemp City Park can be laid out to avoid open cutting across sidewalks or paved access.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a Kemp bore near Elm Street?

A map pin matters in Kemp because an alignment near Elm Street can differ from one aimed toward Center City Ditch or US 175. Send the address or pin, what is going underground, the pipe or conduit size and the footage. A sketch or plans help us see the route, access and crossings before we work up the scope.

Kemp’s heavy clay is a major price factor because it can stick to the reamer and grip the pipe. The quote also reflects bore length, pipe or conduit size, utilities to expose, pavement at US 175 or Elm Street, and any creek or drainage crossing. Pits, excavator time and sand backfill affect the work plan too. The 264 road miles from Yukon can change mobilization, while emergency timing or a high profile route can add planning demands.

Questions people ask about boring in Kemp

Does Trinity take directional boring jobs in Kemp, Kaufman County, and who staffs them?

Yes. We take directional boring work in Kemp and across Texas, using our own crews and partner contractor satellite yards that we have vetted. At Trinity, we coordinate from the first call through the bore log with the assigned crew when a Kemp scope includes FM 1391. For a route near US 175, we first need the location and line details.

Can groundwater or flood prone ground affect Kemp bore pits near Center City Ditch?

It can affect pit planning, though the USDA soil survey maps seasonal water tables within five feet across 5 percent of Kemp. Flood prone soils are mapped across 11 percent. Near Center City Ditch, we plan the crossing below the channel and consider pit placement and pumping if water enters an excavation.

Does Wilson soil in Kemp corrode steel, and what pipe can we use?

Kemp’s mapped soils carry high steel corrosion risk across 94 percent of the area, so the line owner should consider casing and tracer wire materials for a route near Wilson soil. In Wilson soil, we specify HDPE because soil corrosion does not affect the pipe. The owner selects any coating for steel casing or tracer wire.

What ground will a Kemp bore pass through near Wilson soil?

The USDA soil survey maps Wilson silt loam across 15 percent of Kemp, while clay is the surface texture across 58 percent. At about 40 inches down, clay is mapped across 94 percent of the area. Those mapped patterns are not test borings, but they flag sticky ground that can build up on a reamer.

Is there rock under Kemp, and how much has bedrock mapped in the top five feet?

The USDA soil survey maps weathered bedrock within five feet across 19 percent of Kemp. Hard bedrock is not mapped in that depth, but the map does not rule out deeper rock. Where weathered rock meets clay, the drill can slow and the change in material can affect steering.

For a Kemp bore beneath US 175, who approves it and which state office reviews it?

The line owner, not the drilling contractor, applies for the TxDOT utility permit through RULIS, and the TxDOT Dallas District reviews it. We prepare the bore plan and profile for the owner’s application. Beneath US 175, TxDOT rules call for boring or tunneling under existing pavement.

How much notice does Texas811 need for a Kemp bore near Elm Street, and what if marks move?

For an Elm Street start, place the Texas811 locate request at least 48 hours ahead, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before excavation. The ticket has a 20 day window; if the start slips more than 14 days past the original notice, make a new request. Before work resumes on Commerce Street, we refresh worn or moved marks through Texas811.

How far is Kemp from Trinity’s Yukon office, and does nearby Mabank change mobilization?

Kemp is 264 road miles and about a 5.2 hour drive from our Yukon, Oklahoma main office. Mabank is 8.2 miles southeast of Kemp, but a job near Mabank does not change the distance from Yukon. Mobilization is considered along with the bore route, access and ground near US 175.

What affects directional boring costs in Kemp near US 175?

When a Kemp scope includes Texas State Highway 274, we base our price on the defined work. In Kemp, heavy clay can affect drilling time and reaming; a US 175 crossing can add pavement and permit planning; marked utilities may need hydrovac exposure. Length, pipe size, pits, excavator time, creek crossings and mobilization from Yukon also shape the work.

Where the Kemp facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Kemp

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Kemp, Texas

Type the address of your job in Kemp. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Kemp

Same county: Forney · Terrell · Kaufman · Crandall · Talty · Travis Ranch · Combine · Oak Ridge · Post Oak Bend · Scurry · Elmo · Poetry. All counties: Texas county list.