trinityboringsolutions.com

Scurry Texas Directional Boring: Mabank Clay, Highway 34, Cottonwood Creek

Quick Answer: Scurry is an incorporated town, so its city streets belong to the city; we take directional boring, also called horizontal directional drilling (HDD), for work near Texas State Highway 34. Shady Lane is one of the streets a bore may pass beneath without cutting its surface. The trip from our Yukon, Oklahoma main office is 255 road miles, including work near Oak Grove. Mabank soil is common here, and clay about 40 inches down can grip the pipe, so the reaming and pullback need to be planned together.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Scurry bores at a glance

  • Incorporated city in Kaufman County, Texas. Population 871 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 255 miles, about 5.1 hours of driving.
  • Ground: Mabank soil is mapped on 36 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 19 percent of the area.
  • Highways inside the boundary: Texas State Highway 34 and FM 148. State permit office: TxDOT Dallas District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Cottonwood Creek and Coal Iron Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Does anyone do directional boring near Shady Lane in Scurry?

Scurry is an incorporated town in Kaufman County, so the city itself owns its streets. In Kaufman County, we treat Scurry’s Census Bureau Vintage 2024 estimate of 871 as population context, not a measure of boring demand. We install water, sewer, gas, electric conduit and fiber lines, routing them beneath streets such as Shady Lane or Page Lane when a project calls for a crossing without an open cut.

Our main office is in Yukon, Oklahoma, and Scurry work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Directional boring has been part of our work since 1982, giving us four decades of practice to draw on when planning through Scurry’s clay rich Mabank soils. We handle the job from the first call through the bore log, whichever crew is on site.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Scurry’s Mabank soil bring to a bore?

The USDA soil survey maps Mabank as the largest soil series in Scurry, covering 36 percent of the town. Fine sandy loam is the common surface texture, but the material changes below it. At about 40 inches, the survey maps clay across 85 percent of the area and reports average clay content of 40 percent at that depth. Heavy clay is mapped across 86 percent of the area there. These are mapped soil patterns, not test borings, so the route and drilling plan still need to account for what the bore encounters.

USDA soil survey, inside the Scurry city limitsWhat is mapped
Soil series mappedMabank 36 percent, Crockett 19 percent, Wilson 12 percent, Axtell 10 percent and Lufkin 7 percent
Texture at the surfacefine sandy loam 73 percent, silt loam 12 percent and loamy fine sand 10 percent
Texture about 40 inches downclay 85 percent and sandy clay loam 13 percent
Engineering class about 40 inches downlean clay (CL) 58 percent, fat clay (CH) 37 percent and clayey sand (SC) 5 percent
Average clay content about 40 inches down40 percent
Bedrock mapped within 60 inches19 percent of the area (0 percent hard rock, 19 percent weathered rock)
Seasonal water table within 60 inches9 percent of the area
Flood prone soils5 percent of the area
High corrosion risk for uncoated steel86 percent of the area

Weathered bedrock is mapped within 60 inches across 19 percent of Scurry; hard bedrock is not mapped at that depth. A bore can meet weathered material, and the mapped typical bedrock depth is 53 inches. Seasonal water tables are mapped within 60 inches across 9 percent, while flood prone soils cover 5 percent, so pits and creek routes need attention. High steel corrosion risk is mapped across 86 percent, a concern for uncoated casing and tracer wire that the line owner should address. The Pleistocene Alluvial gravel, sand, silt, and clay unit also indicates changing material with depth.

How do we drill Scurry’s clay without losing the line?

Mabank soil has fine sandy loam at the surface and clay below. We plan the bore around that change, track the head from the surface, and keep fluid returns in view near pavement on Texas State Highway 34.

  1. With clay mapped below Scurry’s fine sandy loam, we use a thinner fluid mix and staged reaming to limit sticky buildup around the reamer.
  2. Heavy clay is mapped across 86 percent of the area at about 40 inches, so we watch returns and keep fluid pressure controlled near Texas State Highway 34 pavement.
  3. Mabank soil can grip pipe as the hole closes, so we plan to pull the line soon after the final ream rather than leave the opening idle.
  4. At Cottonwood Creek, we plan the bore depth below the channel, check the route for mapped utilities and track drill depth and pitch from the surface.
Walkover locator held over a flowing creek while tracking the drill head on a 385 foot rock bore in Guthrie, Oklahoma
Tracking the drill head with a walkover locator over a flowing creek on a 385 foot bore in Guthrie, Oklahoma.

Which roads and creeks could a Scurry bore pass beneath near Shady Lane?

Texas State Highway 34 and FM 148 run through Scurry, with 6.2 mapped roadway miles of Highway 34 and 5.7 of FM 148 inside town limits. A bore under either state road needs its own route and permit planning. Shady Lane is the longest named street at 0.81 miles in town, followed by Page Lane at 0.65 miles and Stewart Street at 0.51 miles. Starr Street adds another named route for local service crossings. The mapped street network totals 25.85 public road centerline miles.

CrossingTypeMapped extentWho has a say
Texas State Highway 34State highway6.2 roadway miles insideState highway office
FM 148State highway5.7 roadway miles insideState highway office
Cottonwood CreekStream0.4 channel miles insideChecked for Corps of Engineers jurisdiction
Coal Iron CreekStream0.26 channel miles insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Scurry or within one mile outside town limits, so there is no mapped local track crossing to plan around. Cottonwood Creek runs 0.4 channel miles through town, and Coal Iron Creek runs 0.26 miles. Three mapped street crossings intersect named streams, making the creek route and entry pits important parts of a crossing plan. No lakes or ponds are mapped within one mile of Scurry.

Who approves work under Texas State Highway 34 in Scurry?

Scurry’s city streets belong to the city, while work in the right of way of Texas State Highway 34 or FM 148 needs a TxDOT utility permit. The utility owner files through TxDOT’s RULIS system, and the TxDOT Dallas District reviews it; we prepare the bore plan and profile and work under the owner’s permit. For electric or communication crossings, the stated cover is 60 inches below the lowest crossed grade, with 48 inches for a line running along the right of way. Existing highway pavement is bored or tunneled, and a Cottonwood Creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried in Kaufman County near Scurry?

The water provider for a specific Scurry address has to be confirmed with the city, Kaufman County or the local water district before a bore is planned. Public records do not identify a water system by this town’s name, so the address determines whom to check with. Oncor Electric Delivery Company, Farmers Electric Cooperative and Trinity Valley Electric Cooperative report service in Kaufman County. We confirm the electric line owner for the address before planning a conduit bore near Shady Lane or another route.

Line ownerWhat it isSourceSize
Oncor Electric Delivery Company, Farmers Electric Cooperative and Trinity Valley Electric CooperativeElectric utilities reporting service in Kaufman CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Scurry’s median housing year at 1998; 10 percent of homes were built before 1960, 42 percent from 1960 to 1999 and 48 percent in 2000 or later. That mix can mean both replacement work and new service routes along Page Lane. Before drilling near marked utilities, we hydrovac pothole each line on the route; paint shows position, not depth.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

What is near Scurry, including Oak Grove?

Scurry is an incorporated town in Kaufman County, at elevation 423 feet, with 2.0 square miles of land and ZIP code 75158. Oak Grove is 4.1 miles east, while Grays Prairie is 3.4 miles southeast and Cottonwood is 4.3 miles south. Kaufman, the county seat and nearest larger city, is 6.1 miles northeast. From our Yukon, Oklahoma main office, the drive is 255 road miles and 5.1 hours, a distance that factors into planning mobilization for work near Texas State Highway 34.

Places near Scurry

Which jobs call for a bore near Page Lane in Scurry?

  • Highway crossing: A bore beneath Texas State Highway 34 keeps the roadway uncut and follows the cover depth set in the TxDOT permit.
  • Water service: A service route near Page Lane needs the address specific water provider confirmed before we plan the line.
  • Fiber conduit: A fiber route along Shady Lane can pass below the street while hydrovac potholes expose marked utilities on its path.
  • Creek crossing: A Cottonwood Creek bore needs a route planned beneath the channel and a check for federal jurisdiction during planning.
  • Electric conduit: Near FM 148, we confirm the line owner before planning conduit and account for the state highway right of way if crossed.
  • Sewer line: A sewer route near Starr Street can be bored beneath pavement, with the utility crossings exposed before drilling approaches them.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Scurry quote near Cottonwood Creek?

For a Scurry quote, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help. Include whether the route approaches Cottonwood Creek or crosses Texas State Highway 34, since those details shape the bore plan and the information needed to scope it.

The 255 road miles from Yukon set part of the mobilization plan for a Scurry job. Mabank clay can affect reaming and pipe pullback, while a route beneath Texas State Highway 34 adds permit planning. Creek or drainage crossings, the number of utilities to expose, pipe size and bore length also change the work. Pits, excavator time, sand backfill, pavement and emergency timing can add steps to a route along Shady Lane or Page Lane.

Questions people ask about boring in Scurry

Does Trinity Boring Solutions take jobs in Scurry and Kaufman County, and who staffs them?

Yes. Along Texas State Highway 34, we take directional boring work in Scurry and across Texas, with permits handled through the TxDOT Dallas District. Our own crews and partner drilling contractors from satellite yards we have vetted can staff the work, while customers deal with Trinity from the first call through the bore log. That applies to a route near Shady Lane as well as one outside town.

Does Mabank soil in Scurry create a corrosion concern, and what pipe can be used?

The USDA soil survey maps high steel corrosion risk across 86 percent of Scurry, so the line owner should consider the materials for steel casing and tracer wire. On Mabank soils, we use HDPE because it does not share that soil corrosion concern during boring installations. The right choice for a route near Mabank soil depends on the line and its owner.

What ground does a bore pass through in Scurry’s Mabank soil?

The USDA soil survey maps Mabank across 36 percent of Scurry, with fine sandy loam at the surface. At about 40 inches, clay is mapped across 85 percent of the area. That deeper clay can stick to the reamer and grip a pipe, so staged reaming and a planned pullback matter on a bore near Page Lane.

Is rock likely in a Scurry bore near Texas State Highway 34?

Weathered bedrock is mapped within five feet across 19 percent of Scurry, with typical bedrock depth at 53 inches. For Scurry crossings, we account for Wilson soil series while recognizing hard bedrock is not mapped within that depth. A route near Texas State Highway 34 still needs to be planned for possible changes in material rather than treated as uniform soil.

Who approves a Scurry bore under Texas State Highway 34?

The utility owner applies for the TxDOT utility permit through RULIS, and the TxDOT Dallas District reviews work under Texas State Highway 34. We prepare the bore plan and profile and work under the permit issued to that owner. The permit sets the required route and cover for the crossing.

Can a line be bored beneath Cottonwood Creek in Scurry?

A bore can be planned beneath Cottonwood Creek, which has 0.4 channel miles mapped inside Scurry. The route needs to stay below the channel, and planning checks whether the crossing falls under U.S. Army Corps of Engineers jurisdiction. The channel and entry pit locations shape the plan.

What bore sizes and lengths can Trinity handle near Starr Street in Scurry?

We handle lines from 3/4 inch service sizes up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. A project near Starr Street still depends on the route, ground and access. Send the planned line size and footage so we can assess the scope.

How early should I call Texas811 for a Scurry bore near Shady Lane?

Count back at least two working days from the planned start, excluding Saturdays, Sundays and legal holidays. For a Shady Lane bore, do not request the locate earlier than 14 days before excavation. If the start slips more than 14 days past the original notice, submit a new request; have worn or moved marks refreshed through Texas811 before work continues.

What affects the price of a Scurry bore under Texas State Highway 34?

The route and scope determine the price, not just footage. For Texas State Highway 34, permit planning and pavement affect the work; Mabank clay, pipe size, bore length, utility crossings, pits and backfill can also change it. The 255 road miles from Yukon affect mobilization, and creek crossings or emergency timing add further planning.

Where the Scurry facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Scurry

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Scurry, Texas

Type the address of your job in Scurry. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Scurry

Same county: Forney · Terrell · Crandall · Mabank · Talty · Travis Ranch · Combine · Oak Ridge · Kemp · Post Oak Bend · Elmo · Poetry. All counties: Texas county list.