Oak Grove Texas Directional Boring: Crockett Soil, FM 1388 And Prairie Branch
Quick Answer: Crockett soil and clay below the surface can cling to a reamer and grip pipe, so Prairie Branch crossings need a carefully managed bore. Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), in Oak Grove, Texas, including routes beneath Prairie Branch. Oak Grove is 256 road miles from our Yukon, Oklahoma main office, with Houston Street among the local routes to consider. The mapped heavy clay can hold an open hole, but sticky cuttings call for staged reaming and a same day pull.
Oak Grove bores at a glance
- Incorporated city in Kaufman County, Texas. Population 866 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 256 miles, about 5.1 hours of driving.
- Ground: Crockett soil is mapped on 32 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 41 percent of the area.
- Highways inside the boundary: FM 1388 and FM 2860. State permit office: TxDOT Dallas District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Prairie Branch.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring along Houston Street in Oak Grove?
We take directional boring and horizontal directional drilling (HDD) work in Oak Grove, Kaufman County. The Census Bureau Vintage 2024 estimate puts the town’s population at 866. On Houston Street and FM 2860, our crews can install water, sewer, gas, electric conduit and fiber lines by bore, with the route chosen for the address and existing utilities.
Our main office is in Yukon, Oklahoma, and Oak Grove work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We began directional boring in 1982. More than four decades of boring helps us plan for the sticky clay mapped around Houston Street, where reamer buildup and pipe grip can affect the pull.

What is Crockett soil like to bore through in Oak Grove?
The USDA soil survey maps Crockett soil across 32 percent of Oak Grove, with Crockett fine sandy loam mapped over 25 percent. Surface texture is mostly fine sandy loam, while clay accounts for 18 percent of mapped surface texture. About 40 inches down, clay makes up 88 percent of the mapped texture, and average clay content at that depth is 44 percent. We treat Crockett, Mabank, Wilson and Burleson as mapped soil patterns, not test borings, when planning directional boring in Oak Grove. The deeper clay can stick to a reamer and hold an open hole, so the actual route still matters.
| USDA soil survey, inside the Oak Grove city limits | What is mapped |
|---|---|
| Soil series mapped | Crockett 32 percent, Mabank 21 percent, Wilson 14 percent, Burleson 10 percent and Axtell 8 percent |
| Texture at the surface | fine sandy loam 61 percent, clay 18 percent and silt loam 14 percent |
| Texture about 40 inches down | clay 88 percent, sandy clay loam 6 percent and clay loam 5 percent |
| Engineering class about 40 inches down | fat clay (CH) 53 percent and lean clay (CL) 47 percent |
| Average clay content about 40 inches down | 44 percent |
| Bedrock mapped within 60 inches | 41 percent of the area (0 percent hard rock, 41 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 6 percent of the area |
| High corrosion risk for uncoated steel | 94 percent of the area |
Weathered bedrock is mapped within 60 inches across 41 percent of Oak Grove, with typical bedrock depth at 51 inches; that can slow a bore where the bit meets harder material. The map unit is Kemp clay and Corsicana Marl, undivided, of Maastrichtian age. Seasonal water tables are not mapped within 60 inches, while flood prone soils cover 6 percent, so Prairie Branch still merits a channel crossing plan. High steel corrosion risk covers 94 percent; the line owner should consider casing and tracer wire materials, while HDPE avoids that soil exposure concern.
How do we drill through Oak Grove clay?
Crockett soil and clay mapped below the surface call for control of cuttings and drilling fluid. At a Houston Street route, we plan the bore around the specific ground and marked lines.
- Crockett soil can ball on a reamer, so we use thinner fluid with polymer and open the hole in stages before pulling pipe the same day.
- With heavy clay mapped at about 40 inches, we watch Prairie Branch route returns and limit fluid pressure where it could lift pavement.
- Weathered bedrock is mapped within 60 inches in parts of Oak Grove, so we track depth and pitch as the drill moves between soil and rock.
- Before a Houston Street bore nears a marked utility, we expose it with hydrovac potholing; paint indicates its position, not its depth.

What does a bore have to cross near Prairie Branch in Oak Grove?
FM 1388 and FM 2860 run through Oak Grove, while Texas State Highway 34 is 0.5 miles from the limits and US 175 is 1.1 miles away. Houston Street is the longest named street at 2.98 miles within town. FM 2860 has 0.6 miles, and Highland Drive and Crest Lane each have 0.35 miles. A route under a state highway needs its own bore plan and right of way review, while a Houston Street job has a different street layout to work around.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 1388 | State highway | 3 roadway miles inside | State highway office |
| FM 2860 | State highway | 1.2 roadway miles inside | State highway office |
| Texas State Highway 34 | Highway nearby | 0.5 miles outside | State highway office |
| US 175 | Highway nearby | 1.1 miles outside | State highway office |
| Prairie Branch | Stream | 0.14 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Kings Creek | Stream nearby | 0.1 miles outside | Checked for Corps of Engineers jurisdiction |
| Big Cottonwood Creek | Stream nearby | 0.3 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Oak Grove or within one mile outside its limits, so there is no mapped track route to plan around. Prairie Branch runs 0.14 channel miles in town, and one street crossing of a named stream is mapped. Kings Creek and Big Cottonwood Creek lie just outside town, while no lakes or ponds are mapped within one mile. A Prairie Branch crossing needs channel depth planning and a check for U.S. Army Corps of Engineers jurisdiction.
Who approves a bore near FM 1388 in Oak Grove?
Oak Grove is incorporated, so its city streets, including Houston Street, belong to the city itself. Work in the FM 1388 or FM 2860 right of way needs a TxDOT utility permit reviewed by the TxDOT Dallas District. The line owner, not the driller, submits the application through TxDOT’s RULIS system; we give the owner the bore plan and profile and work under its permit. TxDOT rules require boring or tunneling under existing highway pavement. For electric or communication crossings the cover is at least 60 inches below the lowest crossed grade; water needs 60 inches, and pressurized sewer needs 60 inches. Prairie Branch planning also checks Corps jurisdiction.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities serve Oak Grove and Kaufman County?
The water provider for an Oak Grove address cannot be matched from the available EPA drinking water records. Before planning a bore near FM 1388, confirm the provider for that specific address with the city, Kaufman County or the local water district. Oncor Electric Delivery Company, Farmers Electric Cooperative and Trinity Valley Electric Cooperative report electric service in Kaufman County. The line owner for an Oak Grove conduit route must be confirmed before its specifications are set.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Oncor Electric Delivery Company, Farmers Electric Cooperative and Trinity Valley Electric Cooperative | Electric utilities reporting service in Kaufman County | EIA Form 861 | Confirm the line owner by address |
In Kaufman County, the American Community Survey 2019 to 2023 five year estimates put Oak Grove’s median housing year at 1977; we verify underground conditions before boring. Oak Grove’s survey estimates 35 percent of homes were built before 1960, 57 percent from 1960 to 1999 and 8 percent in 2000 or later; we verify Prairie Branch conditions. A replacement bore near Highland Drive may meet older buried services as well as newer connections. Before drilling near a marked line, we hydrovac pothole to expose it; surface paint shows position, not depth.

How far is Oak Grove from Kaufman and our Yukon yard?
Oak Grove is in Kaufman County, at an elevation of 420 feet, and covers 2.0 square miles. The town’s ZIP code is 75142. Kaufman, the county seat and nearest larger city, is 3.1 miles north; Scurry is 4.1 miles west, and Grays Prairie is 4.5 miles southwest. Post Oak Bend is 6.9 miles north and Oak Ridge is 7.0 miles northeast. From the Yukon, Oklahoma yard, the road distance is 256 miles and the drive is 5.1 hours, which affects mobilization for a Houston Street job.
Places near Oak Grove
- Directional boring in Kaufman: 3.1 miles north
- Directional boring in Scurry: 4.1 miles west
- Directional boring in Grays Prairie: 4.5 miles southwest
- Directional boring in Post Oak Bend: 6.9 miles north
- Directional boring in Oak Ridge: 7 miles northeast
Which jobs call for a bore along Houston Street in Oak Grove?
- Water service: A service bore along Houston Street can connect an address without opening the street surface.
- Highway crossing: A route beneath FM 1388 needs a bore plan that follows the applicable TxDOT permit.
- Fiber conduit: A conduit route near Highland Drive can be planned around marked existing utilities before drilling.
- Creek crossing: A Prairie Branch bore needs a planned path beneath the channel and a jurisdiction check.
- Replacement line: A bore near Crest Lane can replace an older service while avoiding an open cut across pavement.
- Roadside utility: Work beside FM 2860 needs a route planned for the state highway right of way.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of a bore near Crest Lane in Oak Grove?
For a Crest Lane quote, send the address or map pin, what will go underground, the pipe or conduit size and the footage; a sketch or plans help us understand the route. The route detail matters because Prairie Branch, FM 1388 and marked utilities can change how the bore is set up.
The price reflects the job rather than one single measurement. Crockett clay can affect fluid and reaming needs; Prairie Branch adds a creek crossing to assess. The route may also cross utilities that need exposure, or pavement that changes pit and access planning. Pipe size, bore length, concrete, sand backfill and excavator time all matter. Mobilization from Yukon is another part of the scope for Oak Grove, 256 road miles from our main office.
Questions people ask about boring in Oak Grove
Does Trinity take boring jobs in Oak Grove, Kaufman County, and who does the work?
Yes. We take directional boring work in Oak Grove, Kaufman County. Our own crews handle the work, and vetted partner drilling contractors can work from satellite yards. You deal with Trinity from the first call through the bore log, whether the crew on site is ours or a partner’s.
Who owns the electric lines in Oak Grove, Kaufman County, and who confirms conduit specs?
Oncor Electric Delivery Company, Farmers Electric Cooperative and Trinity Valley Electric Cooperative report service in Kaufman County, but that does not identify the line owner at every Oak Grove address. Confirm the specific owner before setting conduit specifications for a route near FM 2860.
Does Oak Grove control Highland Drive, and can a bore avoid cutting the street?
Oak Grove is incorporated, so its city streets, including Highland Drive, belong to the city itself. Directional boring can pass beneath a street without an open cut when the route and site conditions allow. We plan the entry and exit pits outside the pavement where access permits.
What does Oak Grove’s housing age near FM 2860 mean for replacement bores?
The American Community Survey 2019 to 2023 estimates a median housing year of 1977 in Oak Grove. That mix can mean a replacement route near FM 2860 encounters older buried services alongside newer connections. We expose marked utilities before drilling near them so the bore plan reflects what is actually in the path.
Can Crockett soil in Oak Grove corrode steel, and what pipe should we use?
The soil survey maps high steel corrosion risk across 94 percent of Oak Grove. The line owner should choose any coating for steel casing or tracer wire; HDPE does not share that soil corrosion concern. The appropriate pipe depends on the line and its specifications, not the soil map alone.
What ground does a bore pass through in Oak Grove’s Crockett soil?
Crockett is mapped across 32 percent of Oak Grove, and clay makes up 88 percent of the mapped texture about 40 inches below the surface. The USDA soil survey maps patterns rather than test borings. That clay can cling to the reamer and grip pipe, so the actual bore route and field conditions guide the method.
How far is Oak Grove from Trinity’s Yukon office, and does Kaufman affect the job?
We travel 256 road miles from our Yukon, Oklahoma main office to Oak Grove, a 5.1 hour drive for project coordination. Kaufman is 3.1 miles north of town. The distance can affect mobilization, while the work plan itself depends on the address, route, ground and what the bore crosses.
How much notice does a Houston Street bore in Oak Grove need, and what if marks move?
The person arranging the bore along Houston Street should give Texas811 the path and excavation details at least 48 hours before digging, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If the start slips more than 14 days past the notice, request a new one. Refresh worn or moved marks through Texas811 before continuing.
What site conditions shape directional boring costs near FM 1388 in Oak Grove?
The job details determine the price, not a single standard rate. Crockett clay, bore length and pipe size affect the ground work; FM 1388 permits and pavement affect planning; utility crossings and Prairie Branch affect exposure and route choices. Pit work, excavator time, backfill, urgency and mobilization from Yukon also shape the scope.
Where the Oak Grove facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Oak Grove
- U.S. Census Bureau, TIGER/Line 2024: Oak Grove boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Oak Grove
- U.S. Census Bureau, American Community Survey 2019 to 2023: Oak Grove housing units and year built
- Macrostrat geologic map compilation: map units under Oak Grove
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Kaufman County
- U.S. Geological Survey, Elevation Point Query Service: Oak Grove elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Oak Grove
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Oak Grove
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Oak Grove, Texas
Type the address of your job in Oak Grove. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Oak Grove
Same county: Forney · Terrell · Crandall · Mabank · Talty · Travis Ranch · Combine · Kemp · Elmo · Poetry · Rosser · Cottonwood. All counties: Texas county list.
