trinityboringsolutions.com

Rosita Texas Directional Boring: Lagloria Soil, FM 1021 And Rosita Creek

Quick Answer: Rosita’s top five feet include Lagloria soil and mapped clay, and we use directional boring, also called horizontal directional drilling (HDD), to place lines beneath Rosita Creek without cutting its banks. Rosita Valley Road and FM 1021 are among the routes a bore may need to cross. Rosita is 600 road miles from our Yukon, Oklahoma main office, with FM 1021 inside the mapped community boundary. Clay is mapped at 40 inches below the surface, so sticky cuttings and pressure need close control.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Rosita bores at a glance

  • Unincorporated community in Maverick County, Texas. Population 3,501 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 600 miles, about 12.1 hours of driving.
  • Ground: Lagloria soil is mapped on 19 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 35 percent of the area.
  • Highways inside the boundary: FM 1021. State permit office: TxDOT Laredo District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Rosita Creek and Grande.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring in Rosita near FM 1021?

We handle directional boring in Rosita, where the USDA soil survey maps clay beneath the surface and FM 1021 runs inside the mapped community boundary. The Census Bureau counted 3,501 people in Rosita in the 2020 Census. We can bore water, sewer, gas, electric conduit and fiber beneath streets such as Rosita Valley Road, subject to the route and utility clearances.

Our main office is in Yukon, Oklahoma, and Rosita work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965 and has done directional boring since 1982; Rosita is 600 road miles from our Yukon main office. Our range from 3/4 inch service lines to 48 inch casing suits routes along FM 1021 as well as longer runs across Rosita.

Ditch Witch JT922 compact directional drill beside the Trinity Boring Solutions truck at NE 24th Street in Oklahoma City
Our Ditch Witch JT922 compact directional drill beside the Trinity truck on a sleeve bore at NE 24th Street in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What is Rosita ground like to bore through Lagloria soil?

The USDA soil survey maps Lagloria soil across 19 percent of Rosita, with Lagloria very fine sandy loam on 1 to 3 percent slopes mapped across 11 percent. Very fine sandy loam is the most common listed surface texture, at 28 percent, while clay accounts for 18 percent. At 40 inches below the surface, clay is mapped across 22 percent, and the average clay content there is 31 percent. We treat mapped Lagloria, Maverick, Jimenez, and Copita soil patterns as map information, not test borings, when planning underground work. Clay can hold an open hole but stick to a reamer and grip pipe, so the bore needs controlled fluid and staged reaming.

USDA soil survey, inside the Rosita mapped community boundaryWhat is mapped
Soil series mappedLagloria 19 percent, Maverick 17 percent, Jimenez 16 percent, Copita 14 percent and Rio Grande 9 percent
Texture at the surfacevery fine sandy loam 28 percent, clay 18 percent and very gravelly loam 16 percent
Texture about 40 inches downclay 22 percent, very fine sandy loam 19 percent and variable 16 percent
Engineering class about 40 inches downlean clay (CL) 31 percent, silty clay (CL ML) 19 percent and fat clay (CH) 18 percent
Average clay content about 40 inches down31 percent
Bedrock mapped within 60 inches35 percent of the area (0 percent hard rock, 35 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils9 percent of the area
High corrosion risk for uncoated steel77 percent of the area

The USDA soil survey maps bedrock within 60 inches across 35 percent of Rosita, with weathered bedrock mapped across that same share; within 40 inches, bedrock is mapped across 31 percent. Hard bedrock is not mapped within 60 inches, but the Uvalde Gravel geologic unit is Cenozoic and includes cemented gravel and some sand layers. Seasonal water table is not mapped in the top five feet, while flood prone soils cover 9 percent, including areas to consider near Rosita Creek. High steel corrosion risk is mapped across 77 percent, so the line owner should weigh casing and tracer wire materials.

How do crews bore Rosita clay without losing control?

We plan Rosita bores around the mapped clay, gravel and weathered bedrock, then track the drill head as it passes beneath routes such as FM 1021 and Rosita Valley Road.

  1. Because clay is mapped across 22 percent of Rosita at 40 inches, we use controlled fluid and staged reaming to manage sticky cuttings and limit pressure under pavement.
  2. Where the Uvalde Gravel unit appears along a Rosita route, cemented gravel can challenge steering, so we check drill depth and pitch as each rod advances.
  3. With weathered bedrock mapped within five feet across 35 percent of Rosita, we allow for slower progress where the drill transitions from soil into rock.
  4. Near Rosita Creek, we plan the bore below the channel and check whether the crossing falls under U.S. Army Corps of Engineers jurisdiction.
Rod box on the Vermeer D24x40 S3 Navigator with the bore path heading toward the trees on a rock bore in Guthrie, OK
Rod box on our Vermeer D24x40 with the bore path heading toward the trees on a rock bore in Guthrie, Oklahoma.

What is in the way of a new line along Rosita Valley Road?

FM 1021 runs 3.1 roadway miles inside Rosita’s mapped community boundary, and Loop 480 is 0.5 miles outside it. Rosita Valley Road is the longest named street at 4.58 miles inside the community, followed by Wagon Wheel Road at 2.31 miles and Kickapoo Street at 1.89 miles. A bore can pass below pavement rather than cut across it, with the route and depth set for the specific crossing and line type.

CrossingTypeMapped extentWho has a say
FM 1021State highway3.1 roadway miles insideState highway office
Loop 480Highway nearby0.5 miles outsideState highway office
Rosita CreekStream5.34 channel miles insideChecked for Corps of Engineers jurisdiction
GrandeStream0.03 channel miles insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Rosita or within one mile outside the community, and no street and rail crossings are mapped. Rosita Creek runs 5.34 channel miles inside the community, and the Grande stream runs 0.03 miles; mapped streets cross named streams at three locations. We account for mapped Rosita Creek, while no lakes or ponds are mapped within one mile. A creek route needs a channel plan, including a check for federal jurisdiction, before the bore is laid out.

Who approves a bore in Maverick County near FM 1021 in Rosita?

Rosita has no city government, so a street crossing such as one beneath Kickapoo Street is handled through the county, while work in FM 1021 right of way needs a TxDOT utility permit. The utility owner, not Trinity, submits the application through TxDOT’s online RULIS system, and the TxDOT Laredo District reviews it. We prepare the bore plan and profile for the owner’s application and work under the permit issued to that owner. TxDOT cover requirements depend on the line: electric and communication lines need 60 inches at highway crossings, water needs 60 inches, and pressurized sewer needs 60 inches. Rosita Creek crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the utility lines in Maverick County near Rosita?

The water provider for a specific Rosita address must be confirmed with the county or local water district before a bore is planned; EPA drinking water records do not tie systems to towns. For electric service in Maverick County, AEP Texas Central and Rio Grande Electric Cooperative report service, but that does not identify the line owner at every address. We confirm the owner before planning an electric conduit bore near FM 1021 or Rosita Valley Road.

Line ownerWhat it isSourceSize
AEP Texas Central and Rio Grande Electric CooperativeElectric utilities reporting service in Maverick CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Rosita’s median housing year at 2007; 3 percent of homes were built before 1960, 24 percent from 1960 to 1999 and 73 percent in 2000 or later. That mix can mean both replacement work and new service runs along streets such as Remington Drive. Before drilling near a marked line, we hydrovac pothole it to check its depth; paint alone shows position, not depth.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

What is near Rosita and Chula Vista?

Rosita is an unincorporated census designated place in Maverick County, at an elevation of 734 feet and covering 7.86 square miles. Its ZIP code is 78852. Chula Vista is 2.2 miles north, while Eidson Road is 4.6 miles northwest and Eagle Pass, the county seat, is 6.9 miles northwest. Rosita is 600 road miles and a 12.1 hour drive from our Yukon, Oklahoma yard, so distance is part of planning a project along FM 1021 or Rosita Creek.

Places near Rosita

What boring work comes up near Rosita’s Wagon Wheel Road?

  • Highway crossing: A bore beneath FM 1021 stays below the roadway, with the line type and TxDOT cover requirements shaping its profile.
  • Street service: A water or sewer line along Wagon Wheel Road can pass beneath pavement, with pits placed off the travel surface where access allows.
  • Creek crossing: A route beneath Rosita Creek needs a channel profile and a jurisdiction check before the bore path is set.
  • Electric conduit: A conduit route near Kickapoo Street starts with confirming the line owner and exposing marked utilities on the bore path.
  • Fiber route: A fiber bore along Rosita Valley Road can avoid open cutting, with the route planned around existing marked lines and pavement.
  • Water service: A new service near Remington Drive needs the address specific water provider confirmed before the bore plan is prepared.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Rosita Creek bore quote?

A map pin matters near Rosita Creek because the exact approach can change the channel crossing and access plan. For a crossing on Rosita Valley Road, send us the address or pin, what goes underground, pipe or conduit size, and footage. A sketch or plans for a crossing near Rosita Valley Road or FM 1021 also help us lay out the route.

The job route and conditions set the price. Rosita’s 600 road miles from Yukon affect mobilization, while clay and mapped gravel or weathered bedrock can change drilling time. We also account for pipe size and length, utilities to expose, pavement near FM 1021, creek or drainage crossings at Rosita Creek, and pit or excavator work. Emergency or high profile work can add planning needs.

Questions people ask about boring in Rosita

Does Trinity Boring Solutions take directional boring jobs in Rosita, Maverick County?

Yes, we take directional boring work in Rosita, Maverick County, and across Texas. Trinity manages the job from the first call through the bore log, whether our own crews or a vetted drilling partner is on site. A route near FM 1021 is planned around the site, soil and marked utilities.

Will a bore in Rosita hit rock near Rosita Creek?

Rock is mapped in parts of Rosita: the USDA soil survey shows bedrock within 60 inches across 35 percent of the community, and weathered bedrock across the same share. We use Rosita’s very fine sandy loam surface soil information, and hard bedrock is not mapped within that depth. Near Rosita Creek, the ground can still vary along the proposed route, so the profile and drilling pace must allow for changes.

Who approves a Rosita bore beneath FM 1021?

TxDOT reviews work in FM 1021 right of way through its Laredo District. The utility owner submits the application in TxDOT’s RULIS system, while we prepare the bore plan and profile. Cover depends on the line type; for example, electric, communication, water and pressurized sewer crossings each require 60 inches under the stated TxDOT rules.

Can a line be bored under Rosita Creek in Rosita?

A line can be planned beneath Rosita Creek, which has 5.34 channel miles inside Rosita. The crossing route needs a profile that stays below the channel, and the project is checked for U.S. Army Corps of Engineers jurisdiction during planning. Access and the exact creek approach affect where the entry and exit pits can sit.

Which electric company serves my Rosita address in Maverick County?

AEP Texas Central and Rio Grande Electric Cooperative report electric service in Maverick County, but those county records do not tell us which company owns the line at a particular Rosita address. We confirm the owner before planning a conduit bore, including one near Rosita Valley Road, and check the owner’s conduit requirements.

Who is in charge of Kickapoo Street in Rosita, and does it need to be cut?

Rosita is unincorporated and has no city government, so its streets are handled through the county rather than a city department. A bore beneath Kickapoo Street can avoid an open cut through the pavement. We expose marked utilities along the route first, since surface paint shows position but not depth.

What bore sizes and lengths can Trinity handle near Rosita’s Remington Drive?

We handle bores from 3/4 inch service lines to 48 inch casing, with lengths from 10 feet to 5,000 feet. For a route near Remington Drive, the pipe or conduit size, footage, mapped clay and access determine how the bore is staged. A sketch or plans help us assess the proposed alignment.

How much notice does Texas811 need for a bore on Rosita Valley Road?

For a Rosita Valley Road bore, Texas law requires the locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. Texas811 describes this as at least two working days. If the start slips more than 14 days past the original notice, make a new request; refresh marks that wear off or move before work continues.

What affects directional boring costs near FM 1021 in Rosita, Maverick County?

The route, length and pipe size all matter for a bore near FM 1021. Rosita’s distance from Yukon affects mobilization, and its mapped clay or weathered bedrock can affect drilling time. We also account for pavement, marked utilities to expose, creek or drainage crossings, pits, excavator time, sand backfill and whether the work is urgent.

Where the Rosita facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Rosita

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Rosita, Texas

Type the address of your job in Rosita. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Rosita

Same county: Elm Creek · Siesta Acres · Radar Base · Seco Mines · Quemado · El Indio · Normandy. All counties: Texas county list.