Emhouse Texas Directional Boring: Houston Black, FM 1126 and BNSF Railway
Quick Answer: The Emhouse Water System owns the public water system, while Oncor Electric Delivery Company and Navarro County Electric Cooperative report electric service in Navarro County, so line ownership matters before a bore. Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), work in Texas for routes beneath BNSF Railway or Main Street. Emhouse is 272 road miles from our Yukon, Oklahoma main office, and that distance matters for a route near FM 1126. Houston Black soil is the largest mapped soil series here, and heavy clay can cling to the reamer. We plan the bore around the ground and the crossing.
Emhouse bores at a glance
- Incorporated city in Navarro County, Texas. Population 213 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 272 miles, about 5.4 hours of driving.
- Ground: Houston Black soil is mapped on 40 percent of the area, with clay about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: FM 1126, FM 3383 and FM 1839. State permit office: TxDOT Dallas District.
- Railroad track inside the boundary: BNSF Railway, with 1 mapped street and rail crossings.
- Public water: Emhouse Water System, surface water bought from another system.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Does anyone provide directional boring in Emhouse, Navarro County?
Trinity Boring Solutions takes directional boring work in Emhouse, where the Emhouse Water System owns public water service and Oncor Electric Delivery Company and Navarro County Electric Cooperative report electric service in Navarro County. We confirm the line owner before planning a conduit bore. The Census Bureau Vintage 2024 estimate puts Emhouse at 213 people. Water, sewer, gas, electric conduit and fiber lines can be routed beneath Main Street or Chambers Avenue.
Our main office is in Yukon, Oklahoma, and Emhouse work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore was roughly 4,100 feet with 48 inch pipe under the Arkansas River in Tulsa. A bore near Emhouse’s BNSF Railway track is a smaller job by comparison. We have been a family business since 1965 and have done directional boring since 1982.

What ground should crews expect in Emhouse near Houston Black soil?
The USDA soil survey maps Houston Black soil across 40 percent of Emhouse, with Wilson, Mabank, Burleson and Heiden also present. Surface texture is mapped as clay across 54 percent of the town and clay loam across 27 percent. At about 40 inches below the surface, the survey maps clay throughout Emhouse, with average clay content of 49 percent. The mapped soil patterns are not test borings. For a bore near FM 3383, that heavy clay can stick to the reamer and grip pipe.
| USDA soil survey, inside the Emhouse city limits | What is mapped |
|---|---|
| Soil series mapped | Houston Black 40 percent, Wilson 27 percent, Mabank 19 percent, Burleson 11 percent and Heiden 3 percent |
| Texture at the surface | clay 54 percent, clay loam 27 percent and very fine sandy loam 19 percent |
| Texture about 40 inches down | clay 100 percent |
| Engineering class about 40 inches down | fat clay (CH) 81 percent and lean clay (CL) 19 percent |
| Average clay content about 40 inches down | 49 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 3 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 100 percent of the area |
The soil survey maps no bedrock in the top five feet, but that says nothing about deeper conditions. Seasonal water table is mapped within 60 inches in 3 percent of the area, while flood prone soils are not mapped. High steel corrosion risk is mapped across the town, so the line owner should consider casing and tracer wire materials; the survey does not assign that concern to HDPE. The geologic map unit is Neylandville and Marlbrook Marls, undivided, a Late Cretaceous claystone unit that may continue the clay conditions below the surface.
How do we run a bore through Emhouse clay?
Houston Black soil and clay mapped at depth call for a plan that manages sticky cuttings and protects the surface. Along Chambers Avenue, we set the entry and exit pits in dirt and keep the road surface intact.
- Houston Black soil can ball on the reamer, so we use a fluid mix suited to Emhouse clay and open the hole in stages.
- Because heavy clay can lift pavement if fluid pressure builds, we watch returns on a bore near Main Street and keep pressure controlled.
- The Emhouse soil survey maps seasonal water table within 60 inches in 3 percent of the area, so we keep pits small and pump if water collects.
- Before crossing Chambers Avenue, we hydrovac marked utilities, then track the drill head from the surface and log depth and pitch.

Which roads or tracks could a bore cross in Emhouse near BNSF Railway?
A route in Emhouse can meet FM 1126, FM 3383 or FM 1839, all state highways mapped within town limits. Main Street runs 0.62 miles in town, Chambers Avenue 0.61 miles and Hopkins Avenue 0.58 miles. The mapped public road network totals 6.43 miles. A bore beneath an existing highway keeps pavement uncut, while a Main Street route still needs careful placement around marked utilities and the street crossing.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 1126 | State highway | 0.6 roadway miles inside | State highway office |
| FM 3383 | State highway | 0.2 roadway miles inside | State highway office |
| FM 1839 | State highway | 0.2 roadway miles inside | State highway office |
| BNSF Railway | Railroad | 0.65 track miles inside | The railroad |
BNSF Railway has 0.65 track miles inside Emhouse, and one street and rail crossing is mapped in town. A track crossing requires an agreement from BNSF Railway, with the crossing details set by the railroad. No streams are mapped inside town or within one mile, and no street crossing of a named stream is mapped. No lakes or ponds are mapped within one mile, so there is no mapped local water crossing to plan around.
Who approves work on FM 1126 in Emhouse?
FM 1126 is a state highway, so work within its right of way needs a TxDOT utility permit reviewed by the TxDOT Dallas District. The utility owner, not our crew, submits the application in TxDOT’s online RULIS system; we prepare the bore plan and profile for the owner’s filing. TxDOT requires a bore or tunnel beneath existing highway pavement, and the bore must extend beneath all travel lanes on rural highways. A crossing of BNSF Railway also needs that railroad’s agreement. Emhouse is incorporated, so its city streets belong to the town itself.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What lines are already in the ground near Emhouse Water System?
The Emhouse Water System is a local government system using purchased surface water, with 382 service connections and a population served of 1,146. Oncor Electric Delivery Company and Navarro County Electric Cooperative report electric service in Navarro County, but the specific line owner must be confirmed before a conduit bore. On a route near FM 1126, we hydrovac pothole each marked utility before drilling close to it; locate marks show position, not depth.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Emhouse Water System | Public water system | Surface water bought from another system | 382 connections, 1,146 people served |
| Oncor Electric Delivery Company and Navarro County Electric Cooperative | Electric utilities reporting service in Navarro County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Emhouse’s median housing year at 1994, so we account for existing underground utilities before boring. The survey estimates 26 percent of housing was built before 1960, 37 percent from 1960 to 1999 and 37 percent in 2000 or later. A replacement line near Hopkins Avenue may meet older buried services, while a new service follows a different route. We expose marked utilities by hydrovac before the drill approaches them.

What places are near Emhouse and Rice?
Emhouse is an incorporated town in Navarro County, at an elevation of 471 feet and covering 0.27 square miles. ZIP code 75110 serves the town. Barry is 5.6 miles southwest, Rice is 7.1 miles northeast, Alma is 8.2 miles north, and Corsicana is 8.4 miles southeast. Corsicana is the county seat and nearest larger city. From our Yukon, Oklahoma main office, Emhouse is 272 road miles away, about a 5.4 hour drive, so a route near FM 1126 affects mobilization planning.
Places near Emhouse
- Directional boring in Barry: 5.6 miles southwest
- Directional boring in Rice: 7.1 miles northeast
- Directional boring in Alma: 8.2 miles north
- Directional boring in Corsicana: 8.4 miles southeast
- Directional boring in Blooming Grove: 9.5 miles southwest
Which jobs call for a bore along Chambers Avenue in Emhouse?
- Highway crossing: A bore beneath FM 1126 keeps an existing highway surface intact and follows the TxDOT permit and profile.
- Water service: A connection near Chambers Avenue can tie into a route owned by the Emhouse Water System after the line owner is confirmed.
- Fiber conduit: A run along Hopkins Avenue can be drilled beneath the street, with marked utilities exposed before the drill nears them.
- Rail crossing: A route beneath the BNSF Railway track needs a crossing agreement from the railroad before the bore is planned.
- Electric conduit: Near Main Street, we confirm whether Oncor Electric Delivery Company or Navarro County Electric Cooperative owns the line before setting the route.
- Replacement line: A bore near FM 3383 can replace a buried service while leaving pavement and driveways uncut.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a bore near Main Street in Emhouse?
A map pin matters near Main Street because the exact route determines whether a bore meets the street, a utility or the BNSF Railway track. Send the address or pin, what is going underground, the pipe or conduit size and the footage. A sketch or plans help us check the route before we build the bore plan.
Emhouse is 272 road miles from Yukon, so mobilization is part of the job scope. Houston Black clay can affect reaming, and a route near FM 1126 or BNSF Railway adds crossing requirements and coordination. Price also depends on bore length and pipe size, utilities to expose, pavement or concrete, drainage crossings, pits, excavator time and sand backfill. Emergency work in Emhouse can change our plan, so we adjust the work sequence when the schedule shifts.
Questions people ask about boring in Emhouse
Does Trinity Boring Solutions take jobs in Emhouse, Navarro County, and how are crews assigned?
Yes, we take directional boring jobs in Emhouse, Navarro County. Work is handled by our own crews or through satellite yards operated by partner drilling contractors we have vetted. You work with Trinity from the first call through the bore log, including on a route near Main Street.
Who owns electric lines in Emhouse, Navarro County, and who confirms conduit specifications?
Oncor Electric Delivery Company and Navarro County Electric Cooperative report electric service in the county, but the address determines the line owner. We confirm that owner before planning conduit near FM 1126, and the owner should confirm the required conduit specifications for its line.
Who controls Hopkins Avenue in Emhouse, and does a bore require cutting the street?
Emhouse is incorporated, so Hopkins Avenue is a town street. A directional bore can pass beneath the street without cutting its surface, with entry and exit pits placed in dirt. We still need to locate and expose marked utilities along the proposed route before drilling near them.
How old are buried lines near Chambers Avenue in Emhouse, and what does that mean for replacement bores?
The American Community Survey 2019 to 2023 estimates put the median housing year in Emhouse at 1994, with 26 percent built before 1960. That age mix does not date any particular line near Chambers Avenue, so we locate and pothole marked utilities before planning a replacement bore.
Can Houston Black soil in Emhouse corrode steel, and what pipe should we use?
The USDA soil survey maps high steel corrosion risk across Emhouse, including areas mapped as Houston Black soil. The line owner selects materials and any coating for steel casing or tracer wire. HDPE is not affected by that soil corrosion concern, but the owner should choose the pipe for the project.
What is Houston Black soil like for a directional bore in Emhouse?
Houston Black is mapped across 40 percent of Emhouse, and the survey maps clay at about 40 inches below the surface throughout town. Average clay content at that depth is 49 percent. Sticky cuttings can load the reamer, so we plan staged reaming and watch fluid returns near streets such as Main Street.
How far is Emhouse from the Yukon office via Corsicana, and does distance affect the job?
Emhouse is 272 road miles from our Yukon, Oklahoma main office, about a 5.4 hour drive, with Corsicana 8.4 miles southeast of town. That travel distance affects mobilization for a bore near FM 1839 along with the route, ground and crossing scope.
How much 811 notice is needed for an Emhouse bore near Main Street, and what if marks move?
For a bore near Main Street, submit the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. For a crossing near FM 1126 in Emhouse, if the start slips more than 14 days past the original notice, we submit a new request. Refresh marks through Texas811 if they wear off or move.
What affects directional boring costs near FM 1126 in Emhouse?
The job scope sets the price for a bore near FM 1126. Length, pipe or conduit size and Houston Black clay affect the work, as do utilities to expose and the BNSF Railway crossing. Pavement, drainage crossings, pits, excavator time, sand backfill and emergency or high profile work can also change the scope.
Where the Emhouse facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Emhouse
- U.S. Census Bureau, TIGER/Line 2024: Emhouse boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Emhouse
- U.S. Census Bureau, American Community Survey 2019 to 2023: Emhouse housing units and year built
- Macrostrat geologic map compilation: map units under Emhouse
- U.S. EPA Safe Drinking Water Information System: public water systems serving Emhouse
- U.S. Department of Transportation, North American Rail Network: track owners in Navarro County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Navarro County
- U.S. Geological Survey, Elevation Point Query Service: Emhouse elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Emhouse
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Emhouse
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Emhouse, Texas
Type the address of your job in Emhouse. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
