trinityboringsolutions.com

Powell Texas Directional Boring: Burleson Clay, Texas State Highway 31, Union Pacific

Quick Answer: Union Pacific track and Texas State Highway 31 are the main obstacles, and Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Powell, Texas. Powell is 281 road miles from our Yukon, Oklahoma main office, with the Union Pacific Corsicana Subdivision running through town. The USDA soil survey maps Burleson clay across much of Powell, so sticky cuttings and clay that grips pipe call for staged reaming and a prompt pull.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Powell bores at a glance

  • Incorporated city in Navarro County, Texas. Population 111 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 281 miles, about 5.5 hours of driving.
  • Ground: Burleson soil is mapped on 72 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Texas State Highway 31, FM 633 and FM 1393. State permit office: TxDOT Dallas District.
  • Railroad track inside the boundary: Union Pacific, with 4 mapped street and rail crossings.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring under Union Pacific track in Powell?

Along Powell’s 3.15 miles of Union Pacific track, Trinity Boring Solutions takes directional boring work; the Census Bureau Vintage 2024 estimate puts the town at 111 people in Navarro County. On 2nd Street, our crews can bore routes for water, sewer, gas, electric conduit or fiber without cutting the pavement along the path.

Our main office is in Yukon, Oklahoma, and Powell work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For a short service connection off 3rd Avenue or a larger casing job, we handle 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. Our family business started in 1965 and has done directional boring since 1982, with Powell work coordinated through Trinity.

Horizontal directional drill rig set up on an open grass field with support trucks and a vacuum excavation truck
Our horizontal directional drill set up in an open field with the support trucks and the vacuum excavation truck. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show beneath Powell and its Burleson soil?

The USDA soil survey maps Burleson soil across 72% of Powell, with Burleson clay, 0 to 1 percent slopes, covering 67% of the town. Burleson clay, 1 to 3 percent slopes, accounts for another 5%. The mapped surface is clay across 86% of the area. At about 40 inches, the survey maps clay in 97% of the area, with average clay content of 48% and heavy clay across 97%. We treat Powell’s mapped soil patterns as planning context, not as test borings. Expect sticky material that can ball on a reamer and grip the pipe.

USDA soil survey, inside the Powell city limitsWhat is mapped
Soil series mappedBurleson 72 percent, Wilson 8 percent, Heiden 7 percent, Houston Black 6 percent and Lamar 3 percent
Texture at the surfaceclay 86 percent, clay loam 11 percent and very fine sandy loam 3 percent
Texture about 40 inches downclay 97 percent and clay loam 3 percent
Engineering class about 40 inches downfat clay (CH) 94 percent and lean clay (CL) 6 percent
Average clay content about 40 inches down48 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches7 percent of the area
Flood prone soils1 percent of the area
High corrosion risk for uncoated steel97 percent of the area

For a proposed route near 3rd Avenue, bedrock is not mapped in the top five feet; the mapped geology includes Terrace deposits of sand, silt, clay and gravel, as well as Paleocene sedimentary units. A seasonal water table is mapped within 60 inches across 7% of Powell, so pits may need pumping there. Flood prone soils account for 1%. High steel corrosion risk covers 97%, making material choice for casing and tracer wire worth discussing with the line owner; HDPE does not share that concern.

What does it take to bore Powell’s clay ground?

Powell’s Burleson clay can stick to the reamer and tighten around pipe. We adjust the fluid and reaming sequence to suit the ground, then track the drill head and record depth and pitch along the route.

  1. Burleson clay is sticky, so we use a thinner fluid with polymer, ream in stages and plan to pull pipe the day the hole is opened.
  2. Where a route near Texas State Highway 31 runs beneath pavement, we keep fluid pressure controlled and watch returns to avoid lifting the surface.
  3. Before approaching marked lines on 2nd Street, we hydrovac pothole each utility on the bore path; paint shows position, not depth.
  4. Along a Powell route near the Union Pacific track, we track the drill head from the surface and log its depth and pitch as the bore advances.
Open bore pit in red Oklahoma dirt with white PVC conduit stub ups and an orange safety barrier
An open bore pit in red Oklahoma dirt with PVC conduit stubbed up and a safety barrier around it.

Where does a line have to go under Little Rush Creek in Powell?

A Powell bore may need to pass beneath Texas State Highway 31, FM 633 or FM 1393, all mapped within town limits. Texas State Highway 31 has 6.3 roadway miles in Powell, while FM 633 has 3.2 and FM 1393 has 0.1. Among named streets, 2nd Street runs 2.99 miles, 3rd Avenue 1.75 miles and Brookshire 1.56 miles. Northeast 2010 also runs 1.56 miles. A bore can keep those paved surfaces intact, with entry and exit pits placed off the roadway.

CrossingTypeMapped extentWho has a say
Texas State Highway 31State highway6.3 roadway miles insideState highway office
FM 633State highway3.2 roadway miles insideState highway office
FM 1393State highway0.1 roadway miles insideState highway office
Union PacificRailroad3.15 track miles insideThe railroad
Little Rush CreekStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Richland Chambers ReservoirStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Chambers CreekStream nearby0.8 miles outsideChecked for Corps of Engineers jurisdiction
Richland-Chambers ReservoirLake or pond3,517 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

The Union Pacific Corsicana Subdivision has 3.15 track miles inside Powell, and public mapping shows 4 street and rail crossings in town. Any route under that track needs an agreement from Union Pacific. No named streams are mapped inside the limits, but Little Rush Creek runs along or touches the boundary. Richland Chambers Reservoir is 0.5 miles away, and Chambers Creek is 0.8 miles away. The map shows 0.88 miles of unnamed drainage in town, so drainage conditions still matter when choosing a route.

Do I need a permit to bore under Texas State Highway 31 in Powell?

For a bore under Texas State Highway 31, the utility that owns the line files the right of way application in TxDOT’s RULIS system, not the drilling contractor. We provide that owner with the bore plan and profile, then work under the permit issued to it. TxDOT’s Dallas District reviews Powell highway work. Electric and communication lines need 60 inches of cover at a highway crossing; water needs 60 inches and pressurized sewer needs 60 inches. For a Union Pacific track crossing in Powell, we also need an agreement with the railroad. A Little Rush Creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried in Powell, Navarro County?

For a Powell address near Texas State Highway 31, the water provider has to be confirmed with the city, Navarro County or the local water district before a bore is planned. Oncor Electric Delivery Company and Navarro County Electric Cooperative report electric service in Navarro County. We confirm the line owner for the specific address before planning an electric conduit bore, since countywide service reporting does not identify the provider at every Powell property.

Line ownerWhat it isSourceSize
Oncor Electric Delivery Company and Navarro County Electric CooperativeElectric utilities reporting service in Navarro CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Powell’s median housing year at 1975, context we consider when planning underground work. The survey estimates 18% of homes were built before 1960 and 82% from 1960 to 1999, with none built in 2000 or later. That age mix makes checking existing service routes on 2nd Street useful whether the project replaces an older line or adds a connection. Texas811 marks show position, not depth, so we hydrovac expose each marked utility on the bore path before drilling near it.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

What is near Powell, including Kerens?

Powell is an incorporated town in Navarro County, at an elevation of 370 feet and with 1.21 square miles of land. We plan underground work in Powell with ZIP codes 75144 and 75153 in mind. Mildred is 4.4 miles south, Kerens is 5.8 miles east, Goodlow is 6.2 miles east, Eureka is 7.7 miles southeast and Navarro is 8.3 miles southwest. Corsicana, the county seat and nearest larger city, is 8.7 miles west. Powell is 281 road miles and a 5.5 hour drive from our Yukon, Oklahoma main office, which affects how we plan mobilization for work near Texas State Highway 31.

Places near Powell

Which jobs call for a bore near 3rd Avenue in Powell?

  • Highway crossing: A bore beneath Texas State Highway 31 keeps the existing pavement uncut, with the utility owner handling the TxDOT permit.
  • Street service: A water or sewer connection along 2nd Street can pass beneath the road instead of opening a trench through pavement.
  • Fiber route: A fiber conduit bore near 3rd Avenue can avoid cutting the street surface along the route.
  • Rail crossing: A line passing beneath the Union Pacific track needs an agreement from the railroad before the crossing is planned.
  • Creek crossing: A route near Little Rush Creek needs a check for U.S. Army Corps of Engineers jurisdiction during planning.
  • Drainage route: Powell has 0.88 miles of unnamed drainage, so a bore near a drainage path needs careful route and pit placement.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for work near Northeast 2010 in Powell?

A map pin for a Powell job shows whether the route is near Northeast 2010, Texas State Highway 31 or the Union Pacific track, which changes the crossing plan. For a Powell bore near Texas State Highway 31, send us the address or pin, what will go underground, pipe or conduit size, and footage. A sketch or plans help us check the route and access before preparing a quote.

Mobilization starts with Powell’s 281 road miles from Yukon, then the ground and route add detail. Burleson clay affects drilling and reaming, while a Texas State Highway 31 or Union Pacific crossing brings its own planning needs. We also consider bore length, pipe size, utilities to expose, pavement, drainage crossings, pits, excavator time and sand backfill. High profile or emergency work can change the scope, as can the access available for equipment.

Questions people ask about boring in Powell

Does Trinity Boring Solutions take jobs in Powell, Navarro County, and who staffs them?

Yes, we take directional boring work in Powell and across Texas. Our own crews and partner contractor crews from vetted satellite yards handle the work, while Trinity stays your contact through the bore log. For a route near Texas State Highway 31, send the address and line details so we can review the crossing.

Does Burleson soil in Powell create a steel corrosion concern, and what pipe is used?

The USDA soil survey maps high steel corrosion risk across 97% of Powell, including areas mapped as Burleson soil. HDPE is not affected by that soil condition. If the design uses steel casing or tracer wire, the line owner selects any coating; the specific material decision belongs in the project plan.

What ground will a bore pass through in Powell’s Burleson soil?

Powell is mapped mostly as Burleson soil, and the USDA survey shows clay across 97% of the area at about 40 inches below the surface. The survey’s average clay content at that depth is 48%. That sticky material can build on a reamer, so we plan staged reaming and fluid for the ground along the route.

Could our directional bore in Powell hit rock beneath Texas State Highway 31?

Bedrock is not mapped in the top five feet of Powell, but the map does not rule out rock at greater depth. The mapped geology includes Terrace deposits and Paleocene sedimentary units. A route near 3rd Avenue still needs its depth and ground conditions checked against the project plan.

Who approves our bore under Texas State Highway 31 in Powell?

The utility owner files the right of way application in TxDOT’s RULIS system, and TxDOT’s Dallas District reviews the work. We provide the bore plan and profile for that application. For Texas State Highway 31, the required cover depends on the type of line and the permit conditions.

What does a bore beneath the Union Pacific track in Powell require?

A bore beneath Powell’s Union Pacific track needs an agreement from the railroad that owns it. That agreement sets the crossing requirements, including casing, depth and flagging. The track is part of the Union Pacific Corsicana Subdivision, with 3.15 track miles mapped inside town.

How early should I call 811 for a bore on 2nd Street in Powell?

For a 2nd Street bore, Texas811 needs the locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. If the start slips more than 14 days past the notice, submit a new request. In Powell, we have worn or moved marks refreshed through Texas811 before work continues.

How far is Powell from the Yukon office, and does Corsicana change mobilization?

Our Yukon, Oklahoma main office is 281 road miles and a 5.5 hour drive from Powell, which we account for when scheduling work. Corsicana is 8.7 miles west of Powell, but the job’s mobilization is based on the route and equipment needs from Yukon. A location near the Union Pacific track can also affect planning.

What affects the price of directional boring near Texas State Highway 31 in Powell?

For work in Powell’s ZIP codes 75144 and 75153, we set price by scope, not one factor alone. At Texas State Highway 31, pavement and highway crossing requirements matter; Powell’s Burleson clay, bore length, pipe size and utilities to expose matter too. Creek or drainage crossings, pits, excavator time, backfill, emergency timing and the trip from Yukon also affect the work.

Where the Powell facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Powell

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Powell, Texas

Type the address of your job in Powell. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Powell

Same county: Rice · Blooming Grove · Dawson · Frost · Angus · Retreat · Oak Valley · Richland · Barry · Emhouse. All counties: Texas county list.