trinityboringsolutions.com

Wells Texas Directional Boring: Woodtell Soil, US 69 and Red Bayou

Quick Answer: Need a line beneath US 69 without opening the road? We take directional boring, also called horizontal directional drilling (HDD), work in Wells and across Texas for crossings such as US 69. From our Yukon, Oklahoma main office, Wells is 370 road miles away, and a route along Rusk Street still needs its own access and utility checks. Woodtell soil covers much of town, but clay is mapped at about 40 inches, where sticky ground can load the reamer and grip pipe.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Wells bores at a glance

  • Incorporated city in Cherokee County, Texas. Population 903 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 370 miles, about 7.4 hours of driving.
  • Ground: Woodtell soil is mapped on 66 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 67 percent of the area.
  • Highways inside the boundary: US 69 and FM 1247. State permit office: TxDOT Tyler District.
  • Railroad track inside the boundary: none mapped.
  • Public water: City of Wells, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring on Rusk Street in Wells?

We take directional boring work in Wells, Cherokee County, a town with 903 residents according to the Census Bureau Vintage 2024 estimate. A water, sewer, gas, electric conduit or fiber line can follow Rusk Street or another route through town, with the bore path planned to avoid open cutting where the crossing allows.

Our main office is in Yukon, Oklahoma, and Wells work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our roughly 4,100 foot, 48 inch Arkansas River bore in Tulsa shows our reach; a service run on Rusk Street is a different scale. This family business began in 1965 and has drilled directionally since 1982, experience we bring to Wells lines.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

What is Woodtell soil like to bore in Wells?

The USDA soil survey maps Woodtell soil across 66% of Wells and Sacul across 28%, with LaCerda also mapped. Fine sandy loam covers 96% of the surface area, while clay loam covers 4%. At about 40 inches below the surface, clay is mapped across 99% of the area, with an average clay content of 43%. Woodtell, Sacul, and LaCerda map soil patterns in Wells, but we treat them as mapping, not substitutes for site test borings. That shift from a sandy loam surface to clay below can make a bore sticky and put more load on the reamer.

USDA soil survey, inside the Wells city limitsWhat is mapped
Soil series mappedWoodtell 66 percent, Sacul 28 percent and LaCerda 3 percent
Texture at the surfacefine sandy loam 96 percent and clay loam 4 percent
Texture about 40 inches downclay 99 percent
Engineering class about 40 inches downfat clay (CH) 99 percent
Average clay content about 40 inches down43 percent
Bedrock mapped within 60 inches67 percent of the area (0 percent hard rock, 67 percent weathered rock)
Seasonal water table within 60 inches30 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel33 percent of the area

Weathered bedrock is mapped within 60 inches in 67% of Wells, with a typical depth of 40 inches; hard bedrock is not mapped within that depth range. The USDA soil survey maps a seasonal water table within 60 inches across 30% of the area, so pits may need pumping. For work near Red Bayou in Wells, we recognize flood prone soils are not mapped and do not infer their absence from the maps. High steel corrosion risk is mapped across 33%, which is worth discussing for steel casing and tracer wire; the line owner selects any coating. The Cook Mountain Formation, of Bartonian age, includes clay and marly sand, so ground conditions can vary along a bore.

How do we drill Wells clay along Rusk Street?

Wells has fine sandy loam at the surface and clay mapped below it. We plan the bore around the Woodtell soil pattern, then adjust the drilling approach to the ground we encounter along the route.

  1. Clay response: With clay mapped under Woodtell soil at about 40 inches, we use a thinner drilling fluid, ream in stages and plan to pull the pipe the day the hole opens.
  2. Pressure control: Heavy clay covers much of the mapped ground at that depth, so we watch fluid returns to limit pressure that could lift pavement on Rusk Street.
  3. Utility checks: Before drilling near marked lines on Creek 2734, we hydrovac pothole each marked utility; the paint shows its position, not its depth.
  4. Tracking: We follow the drill head from the surface and log depth and pitch along the planned route, including any run toward US 69.
Rock bit on the drill rod at the front of a Vermeer D24x40 S3 with broken sandstone at the entry of a rock bore in Guthrie, OK
Rock bit on the drill rod with broken sandstone at the entry of a rock bore in Guthrie, Oklahoma.

What is in the way of a new line in Wells near US 69?

US 69 runs 1.7 mapped roadway miles inside Wells, and FM 1247 runs 0.8 miles. No additional highway is mapped within 1.5 miles outside the town limits. Rusk Street is the longest named street at 1.73 miles, followed by Rusk Avenue at 1.71 miles and Creek 2734 at 1.06 miles. A bore on one of these roads needs a route plan that accounts for pavement, access and marked utilities. The mapped road lengths help identify where a crossing may be needed, but the exact path depends on the address and plans.

CrossingTypeMapped extentWho has a say
US 69US highway1.7 roadway miles insideState highway office
FM 1247State highway0.8 roadway miles insideState highway office
Red BayouStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Devils BayouStream nearby0.8 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Wells or within 1 mile outside its limits, so the records identify no local track crossing. No streams are mapped inside town. Red Bayou lies 0.1 miles from the limits and Devils Bayou lies 0.8 miles away; no lakes or ponds are mapped within 1 mile. No street crossings of named streams are mapped inside town. If a proposed route reaches a railroad or a creek, those features need to be considered in the crossing plan.

Whose permission does a Wells bore in Cherokee County need?

US 69 and FM 1247 are state highways, so work in their right of way needs a TxDOT utility permit reviewed by the TxDOT Tyler District. The utility that owns the line files through TxDOT’s RULIS system; we prepare the bore plan and profile and work under the permit issued to that owner. TxDOT rules call for boring or tunneling beneath existing highway pavement, with encasement at crossings. Cover depends on the line type, and the district can set a different depth in its permit. Because Wells is incorporated, we treat Rusk Street as a city street for underground boring and coordinate street work accordingly. No railroad is mapped nearby, but a railroad crossing would need an agreement from the railroad that owns the track. Red Bayou or another water crossing is checked for federal jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the Wells water system and what about the City of Wells?

The City of Wells owns the public water system, which uses groundwater wells and serves 853 people through 404 service connections. Oncor Electric Delivery Company, Cherokee County Electric Cooperative Association and Houston County Electric Cooperative report electric service in Cherokee County; that does not identify the provider at every address. Before a conduit bore near the City of Wells water lines or electric facilities, the line owner needs to be confirmed. We hydrovac pothole marked utilities on the path before drilling near them, since surface marks do not show depth.

Line ownerWhat it isSourceSize
City of WellsPublic water systemGroundwater wells404 connections, 853 people served
Oncor Electric Delivery Company, Cherokee County Electric Cooperative Association and Houston County Electric CooperativeElectric utilities reporting service in Cherokee CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Wells’ median housing year at 1977. The estimates show 32% of homes built before 1960 and 20% built in 2000 or later. Those ages do not establish when buried lines were installed, but they make the difference between a replacement bore and a new service worth clarifying. On Rusk Avenue, we expose marked lines with hydrovac before the drill approaches a crossing.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

How far is Wells from Alto and our Yukon office?

Wells is in Cherokee County at an elevation of 333 feet and covers 1.92 square miles. Its ZIP code is 75976. Alto is 13.2 miles northwest, while Redland is 14.9 miles southeast. Hudson, the nearest larger city, is 15.3 miles southeast; Rusk, the county seat, is 24.2 miles northwest. The Yukon, Oklahoma main office is 370 road miles away, about a 7.4 hour drive. That distance is one part of planning a crew’s mobilization for a Wells project.

Places near Wells

What kinds of bores come up in Wells near Red Bayou?

  • Highway crossing: A line beneath US 69 needs a planned bore path that accounts for the highway pavement and the line owner’s permit.
  • Water service: A connection near the City of Wells system starts with the route, pipe size and existing water lines identified for potholing.
  • Street replacement: A replacement line along Rusk Avenue can pass beneath pavement, with marked utilities exposed before the drill approaches them.
  • Creek crossing: If a planned route reaches Red Bayou outside Wells, channel depth and federal jurisdiction are checked during planning.
  • Fiber route: A fiber conduit along Forest Road needs a size and footage plan, plus a check of marked utilities along the bore path.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Wells bore on Rusk Street?

For a bore tied to Rusk Street, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help. A route along Rusk Street can involve pavement and existing lines, so show the start and end points and any crossings you already know about. That lets us review the path before discussing the scope.

Ground, crossings and logistics shape the price. Woodtell soil gives way to clay below the surface, and possible weathered bedrock can affect drilling time. Length, pipe or conduit size, soil and rock, utility exposures, pavement, creek crossings, pits, excavator time and sand backfill all matter. A route involving US 69 can add crossing requirements, while mobilization also reflects Wells’ 370 road miles from Yukon. High profile or emergency work can change the planning needs.

Questions people ask about boring in Wells

Does Trinity take directional boring jobs in Wells, Cherokee County, and how are crews assigned?

Yes. We take work in Wells, Cherokee County, and our crews or vetted partner drilling contractors can staff the job. From the first call through the bore log, we coordinate work around US 69 in Wells, regardless of which crew is on site. For a route on Rusk Street, the address and bore scope help us plan the work.

Who runs the Wells public water system, and where does the water come from?

The City of Wells owns the public water system, supplied by groundwater wells, so we plan utility checks before boring along County Road 1247. Wells’ public system serves 853 people through 404 service connections, figures we consider when planning underground work around Rusk Avenue. If your bore connects near City of Wells water infrastructure, marked lines along the proposed route need to be exposed before drilling near them.

Which electric providers report service in Wells, Cherokee County, and who confirms conduit specs?

Oncor Electric Delivery Company, Cherokee County Electric Cooperative Association and Houston County Electric Cooperative report electric service in Cherokee County. The records do not identify which provider serves every Wells address. Confirm the line owner and conduit specifications for the route before planning a bore along a street such as Rusk Avenue.

Who is responsible for Wells streets like Creek 2734, and must a bore cut the road?

Wells is incorporated, so its city streets belong to the city, including Creek 2734. A directional bore can run beneath street pavement without opening the road when the route and ground allow it. The crossing plan still needs to account for marked utilities and any applicable highway right of way nearby.

What do Wells housing ages along Rusk Avenue mean for replacement bores?

The American Community Survey 2019 to 2023 five year estimates put the median housing year at 1977, with 32% of homes built before 1960. Those figures do not date the buried lines, but a replacement bore may encounter existing utilities. Along Rusk Avenue, we pothole marked lines before drilling near them.

Could groundwater or flood prone ground affect bore pits near Wells and Red Bayou?

It could. The USDA soil survey maps a seasonal water table within 60 inches across 30% of Wells, so some pits may need pumping. Flood prone soils are not mapped, but Red Bayou is 0.1 miles from the town limits. A proposed creek crossing still needs its own depth and jurisdiction review.

What bore sizes and lengths can you handle for a Wells job on Forest Road?

We handle lines from 3/4 inch service lines up to 48 inch casing, and bore lengths from 10 feet to 5,000 feet. For a Forest Road project, the required size and footage help define the equipment and plan. Ground conditions and marked crossings also affect the setup.

How much notice does Texas811 need for a Wells bore along Rusk Street, and what if marks move?

Call Texas811 and describe the planned bore path along Rusk Street. Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before the start. If work slips more than 14 days past the original notice, request again; worn or moved marks must be refreshed through Texas811 before work resumes.

What affects the cost of a directional bore in Wells near US 69?

The scope drives the price, not just the footage. Woodtell soil and clay below the surface affect drilling, while a US 69 crossing can involve highway requirements. Pipe size, rock, utility exposures, pavement, creek or drainage crossings, pits, excavator time, backfill and mobilization from Yukon also shape the job cost.

Where the Wells facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Wells

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Wells, Texas

Type the address of your job in Wells. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Wells

Same county: Jacksonville · Rusk · Shadybrook · New Summerfield · Gallatin · Bullard · Reklaw · Cuney. All counties: Texas county list.