trinityboringsolutions.com

Travis Ranch Texas Directional Boring: Houston Black Clay, FM 740 and Lake Ray Hubbard

Quick Answer: We take directional boring, also called horizontal directional drilling (HDD), work in Travis Ranch, including routes near FM 740, with our own crews and vetted partner drilling contractors. From Yukon, Travis Ranch is 238 road miles away, and FM 740 access helps shape how we plan mobilization. Houston Black soil covers most of the mapped ground, so sticky clay calls for careful fluid control and staged reaming. Near Lake Ray Hubbard, a crossing also needs route and jurisdiction review.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Travis Ranch bores at a glance

  • Unincorporated community in Kaufman County, Texas. Population 7,324 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 238 miles, about 4.7 hours of driving.
  • Ground: Houston Black soil is mapped on 89 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 1 percent of the area.
  • Highways inside the boundary: FM 740. State permit office: TxDOT Dallas District.
  • Railroad track inside the boundary: none mapped.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Does anyone provide directional boring in Travis Ranch near FM 740?

From our Yukon yard, Travis Ranch is 238 road miles away, so crew and equipment mobilization is part of planning work along FM 740. The Census Bureau counted 7,324 people here in 2020. Travis Ranch is unincorporated in Kaufman County, and we install water, sewer, gas, electric conduit and fiber lines for routes along streets such as Travis Ranch Boulevard.

Our main office is in Yukon, Oklahoma, and Travis Ranch work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We began directional boring in 1982. Four decades of drilling matter in Travis Ranch because Houston Black soil can grip a reamer and pipe, so we plan the fluid and pullback around that clay.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

How does Houston Black soil affect our boring in Travis Ranch?

The USDA soil survey maps Houston Black soil across 89 percent of Travis Ranch, including Houston Black clay on most of the mapped area. At about 40 inches below the surface, clay makes up 93 percent of mapped soils, with an average clay content of 53 percent. The surface is mapped as clay across 93 percent of the area, and no sandy ground is mapped at that depth. Houston Black, Altoga, and Heiden are mapped soil patterns, not test borings, so we verify conditions before boring. For a bore near Grimes Drive, sticky clay can build on the reamer and grip the pipe.

USDA soil survey, inside the Travis Ranch mapped community boundaryWhat is mapped
Soil series mappedHouston Black 89 percent, Altoga 5 percent and Heiden 3 percent
Texture at the surfaceclay 93 percent and silty clay 7 percent
Texture about 40 inches downclay 93 percent and silty clay 5 percent
Engineering class about 40 inches downfat clay (CH) 93 percent and lean clay (CL) 7 percent
Average clay content about 40 inches down53 percent
Bedrock mapped within 60 inches1 percent of the area (0 percent hard rock, 1 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel100 percent of the area

The soil survey maps weathered bedrock within 60 inches in only 1 percent of Travis Ranch, with typical depth listed as 45 inches; hard bedrock is not mapped in that interval. Seasonal water table and flood prone soils are not mapped, which can simplify pit planning but does not replace checking the route. High steel corrosion risk is mapped across the area, so the line owner should consider casing and tracer wire materials; HDPE is unaffected by that soil concern. The geologic map identifies Neylandville and Marlbrook marls, undivided, of Late Cretaceous age, described as claystone, so deeper conditions may call for slower drilling.

What does it take to bore clay in Travis Ranch?

Houston Black clay is the main mapped ground around Travis Ranch Boulevard. We match the drilling fluid and reaming pace to that sticky soil, then track the head so the route stays controlled.

  1. Houston Black clay can cling to the reamer, so we use a thinner fluid mix with polymer and open the hole in stages before pulling pipe.
  2. Because heavy clay covers the mapped ground at about 40 inches, we watch fluid returns near FM 740 to avoid pressure lifting pavement.
  3. For a route beside Lake Ray Hubbard Drive, we pothole each marked utility before drilling near it; paint shows location, not depth.
  4. At Grimes Drive, we track the drill head from the surface and log depth and pitch as the bore advances through mapped clay.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

What does a bore have to cross near Lake Ray Hubbard in Travis Ranch?

FM 740 is the state highway mapped inside Travis Ranch, with 3.4 roadway miles in the community; US 80 runs 1.1 miles outside the mapped boundary. Travis Ranch Boulevard is the longest named street at 1.82 miles, followed by Lake Ray Hubbard Drive at 0.92 miles and Grimes Drive at 0.72 miles. A bore under pavement can avoid an open cut, but the route, pits and required cover still have to fit the highway or street crossing. The unincorporated community has no city government, so local street approval is not a city matter.

CrossingTypeMapped extentWho has a say
FM 740State highway3.4 roadway miles insideState highway office
US 80Highway nearby1.1 miles outsideState highway office
Lake Ray HubbardStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
East Fork Trinity RiverStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Buffalo CreekStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Rush CreekStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Lake Ray HubbardLake or pond12,637 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Travis Ranch or within 1 mile outside it, so no local track crossing appears in the records. No named stream crosses a mapped street inside the community. Lake Ray Hubbard lies 0.1 miles from the boundary, while the East Fork Trinity River is 0.3 miles away; a route toward either needs a site specific review. The community also has 0.15 miles of unnamed drainage, which can affect where the bore pits fit.

Who approves a Travis Ranch bore in Kaufman County?

For work in the FM 740 right of way, the utility owner needs a TxDOT utility permit, reviewed by the TxDOT Dallas District. The utility owner submits the application through RULIS, and we prepare the bore plan and profile for that filing. US 80 is just outside the mapped community boundary, but work in its right of way also goes through TxDOT. Travis Ranch has no city government, so its local streets are handled by Kaufman County or the state, depending on the road. A Lake Ray Hubbard crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities should we check in Kaufman County near Travis Ranch?

EPA drinking water records do not identify the provider for a specific Travis Ranch address. Confirm the water provider with the county or local water district before planning a bore near Travis Ranch Boulevard. Oncor Electric Delivery Company, Farmers Electric Cooperative and Trinity Valley Electric Cooperative report electric service in Kaufman County, but that does not establish which one serves every address. Before an electric conduit bore near Lake Ray Hubbard Drive, we confirm the line owner and pothole marked utilities so their actual depth is known.

Line ownerWhat it isSourceSize
Oncor Electric Delivery Company, Farmers Electric Cooperative and Trinity Valley Electric CooperativeElectric utilities reporting service in Kaufman CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 estimates put Travis Ranch housing at a median year built of 2013 and place all 3,012 housing units in 2000 or later, with none in earlier eras. Along FM 740, newer service work can point to possible replacement routes, but we do not infer the age of any buried line from that alone. For a bore along Grimes Drive, we expose each marked utility on the path before drilling near it because surface locate marks show position, not depth.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

Where is Travis Ranch in relation to Heath and Forney?

Travis Ranch is an unincorporated community in northwestern Kaufman County, at an elevation of 464 feet and covering 1.2 square miles. Its ZIP code is 75126. Heath is 3.7 miles north, and Forney is 4.3 miles south; Forney is also the nearest larger city. Kaufman, the county seat, is 18.2 miles southeast. From our Yukon yard, the community is 238 road miles away, about a 4.7 hour drive, which affects crew and equipment mobilization for work around FM 740.

Places near Travis Ranch

What kinds of bores come up on Grimes Drive in Travis Ranch?

  • Highway crossing: A bore under FM 740 needs a route and pit plan that fits TxDOT requirements without cutting through existing highway pavement.
  • Water service: We can bore a water line toward Travis Ranch Boulevard after the provider for that address is confirmed with the county or local water district.
  • Fiber conduit: A fiber route along Grimes Drive can use a bore to pass beneath pavement, with marked utilities exposed before drilling nearby.
  • Drainage crossing: Near Lake Ray Hubbard, we review the channel route and check for U.S. Army Corps of Engineers jurisdiction during planning.
  • Electric conduit: For a route near Lake Ray Hubbard Drive, we confirm the electric line owner before planning the conduit bore.
  • Sewer line: A sewer route near FM 740 can be planned around pavement and Houston Black clay, with the needed highway permit handled by the utility owner.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Travis Ranch bore near Travis Ranch Boulevard?

For a quote near Travis Ranch Boulevard, start with the address or map pin, then tell us what will go underground, such as a water line or fiber conduit. Give us the pipe or conduit size and footage. A sketch or plans showing nearby FM 740, pavement and any Lake Ray Hubbard drainage route help us see the access and crossings.

The Houston Black clay makes soil behavior and bore length key price factors because sticky cuttings can call for staged reaming. We also weigh pipe or conduit size, marked utilities to expose, pavement and concrete, drainage or Lake Ray Hubbard crossings, and pit or excavator needs. A route under FM 740 adds permit and crossing details. Mobilization matters too: Travis Ranch is 238 road miles from our Yukon yard.

Questions people ask about boring in Travis Ranch

Does Trinity Boring Solutions take jobs in Travis Ranch, Kaufman County, and how are crews assigned?

Yes. We take directional boring work in Travis Ranch, which is in Kaufman County. We manage the job from the first call through the bore log, whether our own crew or a vetted partner contractor crew is on site. Routes along FM 740 are planned around the ground, access and any required permits.

Who approves a bore beneath FM 740 in Travis Ranch?

TxDOT handles work in the FM 740 right of way through its Dallas District. The utility that owns the line submits the utility permit application in RULIS, while we prepare the bore plan and profile. The applicable permit sets the route details, including any required cover beneath the highway.

Can a line be bored beneath Lake Ray Hubbard near Travis Ranch?

A bore may be planned for a Lake Ray Hubbard crossing, but the route needs review before work is set. The lake is 0.1 miles from the mapped community boundary, and planning checks whether the crossing falls under U.S. Army Corps of Engineers jurisdiction. Site conditions and the line route determine the bore plan.

Who owns electric lines in Travis Ranch, Kaufman County, and who confirms conduit specs?

Oncor Electric Delivery Company, Farmers Electric Cooperative and Trinity Valley Electric Cooperative report electric service in Kaufman County. We use Travis Ranch Boulevard to locate proposed work, but it does not identify the provider at every address. We confirm the line owner and conduit requirements for the specific route before planning work near Grimes Drive or another local street.

Who is in charge of Grimes Drive in Travis Ranch, and does a bore require cutting it?

Travis Ranch is unincorporated, so it has no city government; local street authority rests with Kaufman County or the state, depending on the road. Directional boring can pass beneath Grimes Drive without an open cut through the pavement. The route and any approvals still depend on the road owner.

Are buried lines old near Lake Ray Hubbard Drive in Travis Ranch?

The American Community Survey 2019 to 2023 estimates put the median housing year at 2013 and all 3,012 housing units in 2000 or later. That suggests service work may involve newer connections, though housing age does not establish buried line age. Near Lake Ray Hubbard Drive, we expose marked utilities before drilling close to them.

How early should I call Texas811 for a Travis Ranch Boulevard bore, and what if marks move?

For a bore along Travis Ranch Boulevard, submit a Texas811 locate request at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. For work in Kaufman County, if the start slips more than 14 days past the original notice, we submit a new request. Refresh worn or moved marks through Texas811 before continuing.

How far is Travis Ranch from Yukon, and does being near Forney change the job?

From our Yukon, Oklahoma main office, Travis Ranch is 238 road miles away, a 4.7 hour drive that affects mobilization planning. Forney is 4.3 miles south, but the distance from Yukon still matters for crew and equipment mobilization. The route near FM 740, the ground and the crossing scope also shape the work plan.

What affects the price of a directional bore under FM 740 in Travis Ranch?

The price depends on the job details, not one fixed measure. Houston Black clay and bore length matter, along with pipe size, utilities to expose, pavement, drainage crossings and pit or excavator needs. Work in the FM 740 right of way adds permit planning. Mobilization from the Yukon yard also affects the scope.

Where the Travis Ranch facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Travis Ranch

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Travis Ranch, Texas

Type the address of your job in Travis Ranch. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Travis Ranch

Same county: Terrell · Kaufman · Crandall · Mabank · Talty · Combine · Oak Ridge · Kemp · Post Oak Bend · Scurry · Oak Grove · Elmo. All counties: Texas county list.