Millsap Texas Directional Boring: Truce Fine Sandy Loam, FM 3028 and Grassy Branch
Quick Answer: Millsap is an incorporated town in Parker County, so its city streets belong to the city; we use directional boring, also called horizontal directional drilling (HDD), to cross FM 3028 without cutting pavement. Our Yukon main office is 257 road miles away, and that trip affects mobilization for work near Front Street. The USDA soil survey maps Truce soil across 58 percent of Millsap; clay at about 40 inches can grip pipe and calls for staged reaming. Grassy Branch has 1.29 channel miles in town, so a crossing needs a route and depth planned around its channel.
Millsap bores at a glance
- Incorporated city in Parker County, Texas. Population 422 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 257 miles, about 5 hours of driving.
- Ground: Truce soil is mapped on 58 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 64 percent of the area.
- Highways inside the boundary: FM 3028 and FM 113. State permit office: TxDOT Fort Worth District.
- Railroad track inside the boundary: Union Pacific, with 1 mapped street and rail crossings.
- Named streams inside the boundary: Grassy Branch.
- Public water: Millsap Water Supply Corporation, surface water bought from another system.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring in Millsap, Parker County?
Millsap is an incorporated town in Parker County, and the Census Bureau Vintage 2024 estimate places its population at 422. We take directional boring work here for water, sewer, gas, electric conduit and fiber lines, routed beneath or alongside streets such as Front Street and Plum Street. The route depends on the address and the crossings already in the ground.
Our main office is in Yukon, Oklahoma, and Millsap work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and we have done directional boring since 1982 when planning work around Millsap roads. With Millsap Water Supply Corporation lines and electric service reported across Parker County, our record of no utility strike in over 25 years matters before a bore gets underway.

What kind of ground does Millsap’s Truce soil bring to a bore?
The USDA soil survey maps Truce soil across 58 percent of Millsap, including Truce fine sandy loam on 1 to 3 percent slopes at 39 percent and an eroded 1 to 5 percent slopes unit at 19 percent. Fine sandy loam covers 72 percent of the mapped surface texture, while clay is mapped across 87 percent at about 40 inches below the surface. Average clay content at that depth is 43 percent. These are mapped soil patterns, not test borings, so the route still needs field checks.
| USDA soil survey, inside the Millsap city limits | What is mapped |
|---|---|
| Soil series mapped | Truce 58 percent, Thurber 16 percent, Hassee 11 percent, Duffau 6 percent and Chaney 3 percent |
| Texture at the surface | fine sandy loam 72 percent, clay loam 16 percent and loamy fine sand 6 percent |
| Texture about 40 inches down | clay 87 percent, sandy clay loam 6 percent and sandy clay 3 percent |
| Engineering class about 40 inches down | lean clay (CL) 67 percent, fat clay (CH) 29 percent and silty clayey sand (SC SM) 3 percent |
| Average clay content about 40 inches down | 43 percent |
| Bedrock mapped within 60 inches | 64 percent of the area (0 percent hard rock, 64 percent weathered rock) |
| Seasonal water table within 60 inches | 11 percent of the area |
| Flood prone soils | 3 percent of the area |
| High corrosion risk for uncoated steel | 90 percent of the area |
The USDA survey maps weathered bedrock within 60 inches across 64 percent of Millsap, with a typical depth of 50 inches; hard bedrock is not mapped within 60 inches. Weathered material can slow a bore without calling for a hard rock tool by default. A seasonal water table is mapped within 60 inches across 11 percent, and flood prone soils across 3 percent, so a Grassy Branch crossing needs depth planned below the channel and pits managed for water. High steel corrosion risk covers 90 percent, a concern for casing and tracer wire that the line owner should address. The geologic map names the Pennsylvanian Mingus Formation.
What does it take to bore Millsap’s clay?
Millsap’s Truce soil is fine sandy loam near the surface, but clay dominates at about 40 inches. We plan the fluid and reaming around that change, then check the route against local crossings.
- With Truce soil’s 43 percent average clay content at about 40 inches, we use thinner fluid with polymer, ream in stages and pull pipe the day the hole is opened.
- Because heavy clay is mapped beneath Millsap, we watch fluid returns near pavement on Front Street so pressure does not lift the surface.
- Where weathered bedrock is mapped within 60 inches across 64 percent of town, we expect slower progress and track depth and pitch as the drill advances.
- Before drilling near marked utilities along FM 3028, we hydrovac pothole each line on the bore path; walkover readings track the head, and paint alone does not show depth.

Where might a Millsap line pass under Grassy Branch?
FM 3028 has 1.2 mapped roadway miles inside Millsap, and FM 113 has 0.1 mile; both are state highways that can shape a bore route. Front Street is the longest named street at 1.34 miles, followed by Plum Street at 0.88 miles and Fannin Street at 0.6 miles. A route beneath these roads can avoid cutting the pavement, but the plan has to account for the road right of way and any marked utilities.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 3028 | State highway | 1.2 roadway miles inside | State highway office |
| FM 113 | State highway | 0.1 roadway miles inside | State highway office |
| Union Pacific | Railroad | 0.76 track miles inside | The railroad |
| Grassy Branch | Stream | 1.29 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Wilson Creek | Stream nearby | Along the boundary | Checked for Corps of Engineers jurisdiction |
| Duke Mountain Branch | Stream nearby | 0.4 miles outside | Checked for Corps of Engineers jurisdiction |
| Rock Creek | Stream nearby | 0.9 miles outside | Checked for Corps of Engineers jurisdiction |
| Grindstone Creek | Stream nearby | 0.9 miles outside | Checked for Corps of Engineers jurisdiction |
Union Pacific has 0.76 track miles inside Millsap on its Baird Subdivision, and public records map one street and rail crossing in town. A bore beneath that track needs the railroad’s crossing agreement. Grassy Branch has 1.29 channel miles in Millsap and four mapped street crossings of named streams. Wilson Creek runs along or touches the town boundary; no lakes or ponds are mapped within one mile.
Do I need a permit to bore beneath Millsap’s FM 3028?
At FM 3028, required cover sets how deep a bore runs: electric and communication lines need 60 inches below the lowest crossed grade and 48 inches along the right of way; water lines need 60 inches at a crossing and 36 inches along the right of way; pressurized sewer needs 60 inches at a crossing. For Millsap crossings, we follow TxDOT’s requirement to bore or tunnel beneath existing highway pavement. The utility owner files the utility permit through TxDOT’s online RULIS system, and the TxDOT Fort Worth District reviews it. We provide the bore plan and profile for that filing and work under the owner’s permit. Millsap’s Union Pacific track requires a separate agreement with the railroad, while the Grassy Branch crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. Because Millsap is incorporated, we treat its city streets as city property when planning boring work.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines are already buried in Millsap, Parker County?
Millsap Water Supply Corporation reports 501 service connections and 1,503 people served, using purchased surface water. That system makes water lines a likely part of route planning around Millsap, but the line owner and location must be confirmed for the specific address. Electric service reported in Parker County includes Oncor Electric Delivery Company, Weatherford Municipal Utility System, Tri-County Electric Cooperative and Wise Electric Cooperative. We confirm the line owner before planning an electric conduit bore near FM 3028.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Millsap Water Supply Corporation | Public water system | Surface water bought from another system | 501 connections, 1,503 people served |
| Oncor Electric Delivery Company, Weatherford Municipal Utility System, Tri-County Electric Cooperative and Wise Electric Cooperative | Electric utilities reporting service in Parker County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Millsap’s median housing year at 1975, with 27 percent of homes built before 1960 and 26 percent built in 2000 or later. That mix can mean a project replaces older pipe or adds a new service. Along Front Street, we hydrovac each marked utility on the bore path before drilling near it; paint shows a line’s position, not its depth.

How far is Millsap from Cool and our Yukon yard?
Millsap is in Parker County at an elevation of 820 feet, with 1.47 square miles of land and ZIP code 76066. Cool is 3.3 miles north, Garner is 5.5 miles north, and Mineral Wells is 6.4 miles northwest. Weatherford, the county seat, is 13.9 miles east. Our Yukon yard is 257 road miles away, a 5.0 hour drive, so mobilization is part of planning a Front Street or FM 3028 job.
Places near Millsap
- Directional boring in Cool: 3.3 miles north
- Directional boring in Garner: 5.5 miles north
- Directional boring in Mineral Wells: 6.4 miles northwest
- Directional boring in Brazos: 8.9 miles southwest
- Directional boring in Dennis: 10.7 miles southeast
What kinds of bores come up on Millsap’s Front Street?
- Highway crossing: A bore beneath FM 3028 can keep the existing roadway uncut, with the route and cover set for the highway crossing.
- Water service: A service route near Millsap Water Supply Corporation lines needs the address and line location checked before drilling.
- Fiber conduit: A fiber bore along Front Street can avoid opening the street, with marked utilities exposed before the drill approaches.
- Creek crossing: A Grassy Branch route needs depth planned below the channel and a check for U.S. Army Corps of Engineers jurisdiction.
- Rail crossing: A bore beneath the Union Pacific Baird Subdivision needs the railroad’s crossing agreement and its requirements for the track crossing.
- Street service: A line near Plum Street can be bored between work pits, with the route adjusted for existing utilities.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for a Millsap quote near Union Pacific?
For a Millsap quote, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help. A route near Union Pacific or Grassy Branch may need a different plan from a short service line on Front Street, so show the crossing locations if you have them.
The price depends on the route and scope, not footage alone. Truce soil and clay at about 40 inches affect drilling conditions; crossings of FM 3028, Union Pacific or Grassy Branch add planning and exposure work. Pipe size, length, pavement, pits, excavator time and sand backfill also matter. The 257 road miles from Yukon affect mobilization, while high profile or emergency work can change the work plan.
Questions people ask about boring in Millsap
Does Trinity take directional boring jobs in Millsap and Parker County, and who staffs them?
Yes, we take directional boring work in Millsap, and our own crews or crews at vetted partner contractor satellite yards can staff it. We stay your point of contact from the first call through the bore log. For a route near Front Street, we plan the crew and equipment around the work scope.
Does Truce soil in Millsap create a steel corrosion concern, and what pipe can be used?
Yes, the USDA soil survey maps high steel corrosion risk across 90 percent of Millsap, including areas mapped as Truce soil. The line owner selects any protection for steel casing or tracer wire. HDPE is not affected by this soil corrosion concern, so the specified line material and use should guide the choice.
What ground does a Millsap bore pass through in Truce soil?
Millsap’s mapped ground is often fine sandy loam at the surface, while the USDA soil survey maps clay across 87 percent of the area at about 40 inches below ground. Truce soil covers 58 percent of town. That clay can stick to the reamer and grip pipe, so staged reaming and fluid control matter.
Could a directional bore in Millsap encounter rock?
Weathered bedrock is mapped within 60 inches across 64 percent of Millsap, with a typical depth of 50 inches. Hard bedrock is not mapped within 60 inches, but the Mingus Formation is the local mapped geologic unit. A bore may slow in weathered material, so the route and tooling depend on field conditions.
Who approves a Millsap bore beneath FM 3028?
TxDOT’s Fort Worth District reviews a utility permit for work in the FM 3028 right of way. The utility owner submits the application through RULIS, and we prepare the bore plan and profile for it. A bore beneath existing highway pavement uses boring or tunneling, with cover requirements set by the line type.
What does a Millsap bore under Union Pacific need?
A bore beneath the Union Pacific Baird Subdivision needs a crossing agreement from the railroad that owns the track. The agreement sets crossing conditions such as casing, depth and flagging. Millsap has 0.76 Union Pacific track miles inside town, so the planned route determines whether that railroad crossing process applies.
How much Texas811 notice is needed for a Millsap bore near Front Street?
For a bore near Front Street, submit a Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. For Millsap work, if the start slips more than 14 days past the original notice, we submit a new request. On Millsap jobs, we refresh worn or moved marks through Texas811 before underground work continues.
How far is Millsap from Mineral Wells and Trinity’s Yukon main office?
Mineral Wells is 6.4 miles northwest of Millsap, while our Yukon main office is 257 road miles away, about a 5.0 hour drive. That distance can affect mobilization for a bore on FM 3028 or near Grassy Branch, so we consider travel alongside the route, equipment and crossing requirements.
What affects the cost of directional boring in Millsap near FM 3028?
The work scope sets the price: bore length and pipe size, Truce soil and clay, and the number of utilities to expose all matter. Pavement on FM 3028, a Grassy Branch crossing, pits, excavator time and backfill can change the plan. Mobilization from Yukon, high profile work or emergency timing also affects the job.
Where the Millsap facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Millsap
- U.S. Census Bureau, TIGER/Line 2024: Millsap boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Millsap
- U.S. Census Bureau, American Community Survey 2019 to 2023: Millsap housing units and year built
- Macrostrat geologic map compilation: map units under Millsap
- U.S. EPA Safe Drinking Water Information System: public water systems serving Millsap
- U.S. Department of Transportation, North American Rail Network: track owners in Parker County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Parker County
- U.S. Geological Survey, Elevation Point Query Service: Millsap elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Millsap
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Millsap
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Millsap, Texas
Type the address of your job in Millsap. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Millsap
Same county: Weatherford · Willow Park · Aledo · Briar · Springtown · Reno · Annetta · Azle · Hudson Oaks · Fort Worth · Western Lake · Cresson. All counties: Texas county list.
