trinityboringsolutions.com

Overton Texas Directional Boring: Tenaha Soil, Union Pacific Track and Little Rabbit Creek

Quick Answer: Can you get a line beneath Union Pacific track in Overton without cutting it? We take directional boring, also called horizontal directional drilling (HDD), for crossings like that and the FM 850 corridor. Overton is 346 road miles from our Yukon, Oklahoma main office, and Front Street is one local route where access and crossing layout matter. The USDA soil survey maps Tenaha loamy fine sand across 29 percent of the city, while sandy clay loam is common at about 40 inches, so crews plan for both a loose surface and a firmer, clay bearing layer.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Overton bores at a glance

  • Incorporated city in Rusk County and Smith County, Texas. Population 2,305 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 346 miles, about 6.8 hours of driving.
  • Ground: Tenaha soil is mapped on 32 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 37 percent of the area.
  • Highways inside the boundary: FM 850, FM 3053, Texas State Highway 135 and FM 2089. State permit office: TxDOT Tyler District.
  • Railroad track inside the boundary: Union Pacific and a short line railroad (reporting mark HOB), with 9 mapped street and rail crossings.
  • Named streams inside the boundary: Little Rabbit Creek and Bowles Creek.
  • Public water: City of Overton, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Does anyone handle directional boring near Union Pacific in Overton?

Trinity Boring Solutions takes directional boring work in Overton, including routes near Union Pacific track in Rusk County. Can you get a line beneath Front Street without cutting it? We plan crossings for water, sewer, gas, electric conduit or fiber along streets such as Front Street and Warren Street. The Census Bureau Vintage 2024 estimate puts Overton at 2,305 people, so service routes may range from street frontage to longer connections.

Our main office is in Yukon, Oklahoma, and Overton work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For Overton projects, our family business began in 1965, and we have done directional boring since 1982. In Overton, our 3/4 inch service lines through 48 inch casing range can fit routes near FM 850, with bore lengths from 10 feet to 5,000 feet.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

What does Tenaha soil mean for a bore in Overton?

Tenaha soil is a major mapped ground type in Overton, so a bore route can move between sandy surface material and clay bearing soil below. The USDA soil survey maps Tenaha series across 32 percent of the city, including Tenaha loamy fine sand on 29 percent of the mapped area. Loamy fine sand makes up 72 percent of the surface texture, while fine sandy loam accounts for 23 percent. At about 40 inches, sandy clay loam is mapped across 70 percent and clay across 14 percent. For Overton planning, these mapped patterns inform our work but are not test borings.

USDA soil survey, inside the Overton city limitsWhat is mapped
Soil series mappedTenaha 32 percent, Lilbert 30 percent, Cuthbert 10 percent, Kirvin 9 percent and Darco 8 percent
Texture at the surfaceloamy fine sand 72 percent and fine sandy loam 23 percent
Texture about 40 inches downsandy clay loam 70 percent, clay 14 percent and loamy fine sand 8 percent
Engineering class about 40 inches downlean clay (CL) 41 percent, clayey sand (SC) 31 percent and silty clayey sand (SC SM) 8 percent
Average clay content about 40 inches down28 percent
Bedrock mapped within 60 inches37 percent of the area (0 percent hard rock, 37 percent weathered rock)
Seasonal water table within 60 inches10 percent of the area
Flood prone soils7 percent of the area
High corrosion risk for uncoated steel20 percent of the area

The USDA soil survey maps weathered bedrock within 60 inches across 37 percent of Overton, with a typical depth of 43 inches; hard bedrock is not mapped in that interval. A hard soil bit may suit weathered sandstone, though progress can slow near the Reklaw Formation, an Eocene layer of sandstone and claystone. Seasonal water tables are mapped within 60 inches across 10 percent, and flood prone soils across 7 percent, so pits and Little Rabbit Creek crossings need attention to water and channel depth. High steel corrosion risk covers 20 percent, so the line owner should consider casing and tracer wire materials.

How do crews bore sandy clay loam in Overton?

In Overton, crews plan around sandy clay loam at about 40 inches and loamy fine sand at the surface. That shift calls for a controlled fluid plan and staged reaming, especially near Front Street pavement.

  1. Tenaha loamy fine sand covers 29 percent of the mapped area, so crews use drilling fluid and staged reaming to help keep loose soil from collapsing behind the bit.
  2. With sandy clay loam mapped at about 40 inches across 70 percent of Overton, crews adjust fluid and reaming to manage the firmer layer without opening the hole too soon.
  3. Where the Reklaw Formation’s weathered sandstone is encountered, a hard soil bit may be suitable; crews slow down and track depth and pitch as the ground changes.
  4. At Little Rabbit Creek, crews plan for channel depth and possible water in pits, then check for Corps jurisdiction during planning before setting the crossing route.
Rod box on the Vermeer D24x40 S3 Navigator with the bore path heading toward the trees on a rock bore in Guthrie, OK
Rod box on our Vermeer D24x40 with the bore path heading toward the trees on a rock bore in Guthrie, Oklahoma.

Where does a line have to go under Front Street in Overton?

Overton routes may need to pass beneath FM 850, FM 3053, Texas State Highway 135 or FM 2089, all mapped inside the city. Texas State Highway 323 is 0.4 miles outside the limits, and Texas State Highway 42 is 1.1 miles away. Front Street is the longest named street at 1.87 miles within the city; Henderson Street runs 1.29 miles and Warren Street 1.28 miles. Those streets and highway corridors can put pavement, access and right of way constraints on the bore alignment.

CrossingTypeMapped extentWho has a say
FM 850State highway3 roadway miles insideState highway office
FM 3053State highway1.6 roadway miles insideState highway office
Texas State Highway 135State highway1.1 roadway miles insideState highway office
FM 2089State highway0.6 roadway miles insideState highway office
Texas State Highway 323Highway nearby0.4 miles outsideState highway office
Texas State Highway 42Highway nearby1.1 miles outsideState highway office
Union PacificRailroad5.65 track miles insideThe railroad
a short line railroad (reporting mark HOB)Railroad1.59 track miles insideThe railroad
Little Rabbit CreekStream1.58 channel miles insideChecked for Corps of Engineers jurisdiction
Bowles CreekStream0.59 channel miles insideChecked for Corps of Engineers jurisdiction
Rabbit CreekStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Overton LakeLake or pond21 acres, insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific track runs 5.65 miles through Overton on the Palestine Subdivision, and the short line railroad marked HOB adds 1.59 miles. Public records map 9 street and rail crossings in the city, so a route near Front Street may need a track crossing agreement. Little Rabbit Creek runs 1.58 channel miles and Bowles Creek 0.59 miles; one mapped street crossing of a named stream makes creek depth and access relevant. Overton Lake covers 21 acres inside the limits.

Do I need a permit to bore in Rusk County and Overton?

For a bore along FM 850 or another state route in Overton, the line owning utility applies for the TxDOT utility permit, and the TxDOT Tyler District reviews it. The owner files through RULIS; we prepare the bore plan and profile and work under the permit issued to that utility. Because Overton is incorporated, we account for city ownership when planning directional boring beneath its city streets. A Union Pacific track crossing needs an agreement from the railroad owner that sets crossing conditions, and TxDOT asks for a copy when the line also uses highway right of way. Little Rabbit Creek is checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns lines near the City of Overton water system?

The City of Overton owns the public water system, which uses groundwater wells and serves 2,275 people through 934 service connections. For a water bore near FM 850, that system’s location and the electric line owner need to be confirmed before the route is set. Rusk County electric service is reported by Oncor Electric Delivery Company, Southwestern Electric Power, Cherokee County Electric Cooperative Association, Deep East Texas Electric Cooperative, Rusk County Electric Cooperative and Upshur Rural Electric Cooperative. The specific line owner must be confirmed before an electric conduit bore.

Line ownerWhat it isSourceSize
City of OvertonPublic water systemGroundwater wells934 connections, 2,275 people served
Oncor Electric Delivery Company, Southwestern Electric Power, Cherokee County Electric Cooperative Association, Deep East Texas Electric Cooperative, Rusk County Electric Cooperative and Upshur Rural Electric CooperativeElectric utilities reporting service in Rusk County and Smith CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 estimates put Overton’s median housing year at 1966; 36 percent of homes were built before 1960, and 16 percent in 2000 or later. That age mix can mean work on existing service lines as well as new connections near Warren Street. Before a drill approaches marked utilities, we use hydrovac potholing to expose them; paint shows position, not depth. That check matters around the City of Overton water lines and whichever electric provider serves the address.

Coiled black HDPE conduit fitted with a pulling grip staged on a lawn along a completed bore path
Coiled HDPE conduit fitted with a pulling grip, staged on a lawn along a finished bore path.

What is near Overton, including Kilgore?

Overton sits in Rusk and Smith counties, with 80 percent of its 6.7 square miles in Rusk County and 20 percent in Smith County. The city is at 492 feet elevation, and ZIP code 75684 serves the area. New London is 2.5 miles east, Arp is 5.8 miles southwest, and Kilgore is 10.6 miles northeast. Henderson, the Rusk County seat, is 13.2 miles southeast. Our Yukon, Oklahoma yard is 346 road miles away, a 6.8 hour drive, which can affect mobilization for work near FM 850 or Little Rabbit Creek.

Places near Overton

What would we bore near Warren Street in Overton?

  • Highway crossing: A bore beneath FM 850 can keep a utility line out of the pavement while the route follows the state highway corridor.
  • Street service: A water or sewer line along Warren Street can pass beneath driveways rather than opening a trench across each access.
  • Rail crossing: A bore beneath Union Pacific track needs an agreement with the railroad owner before the alignment and crossing details are settled.
  • Creek crossing: A Little Rabbit Creek bore needs a route planned below the channel, with water and creek access considered at the entry and exit pits.
  • Water connection: A service near the City of Overton system can be planned around groundwater lines and the marked utilities along the proposed route.
  • Fiber conduit: A conduit route near Front Street can avoid cutting the street surface while connecting into the planned path.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a bore near Little Rabbit Creek in Overton?

A map pin matters near Little Rabbit Creek because it shows whether the route reaches the channel, a street or a nearby access point. For an Overton quote, send the address or pin, what will go underground, the pipe or conduit size and the footage. A sketch or plans help us place the proposed bore against Front Street, FM 850 or another route.

The 346 road miles from Yukon are part of planning a job near Little Rabbit Creek, followed by the ground and crossing scope. Tenaha loamy fine sand, sandy clay loam and weathered bedrock can affect drilling and reaming. Price also reflects pipe or conduit size, length, utilities to expose, pavement, creek crossings, pits, excavator time and sand backfill. A Union Pacific crossing or work along FM 850 can add coordination and permit planning; high profile or emergency work also affects the scope.

Questions people ask about boring in Overton

Does Trinity take directional boring jobs in Rusk County near Overton, and how are crews assigned?

Yes, Trinity Boring Solutions takes work in Overton and across Texas, including Rusk County. Our own crews and partner contractor crews from vetted satellite yards can handle a job, while you work with Trinity from the first call through the bore log. Routes near FM 850 are planned around the address and the proposed line.

Who approves a bore under FM 850 in Overton?

The line owning utility applies for the TxDOT utility permit, and the TxDOT Tyler District reviews the application for FM 850. The utility files through RULIS, while we prepare the bore plan and profile and work under the owner’s permit. The permit covers the proposed crossing route and may set its required depth.

What does an Overton bore under Union Pacific track require?

A crossing beneath Union Pacific track in Overton needs an agreement with the railroad owner before the route is set. The agreement determines crossing conditions such as casing, depth and flagging. Public records show 5.65 track miles for Union Pacific within the city, so the exact crossing location matters.

Can a line be bored beneath Little Rabbit Creek in Overton?

Yes, a line can be planned beneath Little Rabbit Creek in Overton, with the bore depth set to pass under the channel. The creek has 1.58 channel miles inside the city. During planning, the crossing is checked for U.S. Army Corps of Engineers jurisdiction, and crews account for water near the pits.

Who runs Overton’s public water system, and where does its water come from?

The City of Overton runs the public water system, which draws from groundwater wells. We use Overton’s 934 service connections and 2,275 people served to frame underground utility planning. For a bore near the water system, the proposed route and marked lines need to be checked before drilling begins.

Which company owns electric lines in Rusk County near Overton, and who confirms conduit specs?

Several utilities report electric service in Rusk County, including Oncor Electric Delivery Company and Southwestern Electric Power. That list does not identify the provider at every Overton address. The specific line owner should be confirmed before a conduit bore, and the owner can confirm the conduit specifications for the planned route.

How far is Overton from the Yukon office near Kilgore, and does distance matter?

Our Yukon, Oklahoma main office is 346 road miles and a 6.8 hour drive from Overton, shaping travel planning. Kilgore is 10.6 miles northeast of Overton. The distance from Yukon can affect mobilization for a job near Warren Street, along with the bore length, ground and crossings.

How much Texas811 notice is needed for a bore near Front Street in Overton?

For a bore near Front Street, submit a Texas811 locate request at least 48 hours before excavation, not counting Saturdays, Sundays and legal holidays. The request cannot be made earlier than 14 days before work. If the start slips more than 14 days past the original notice, submit a new request; worn or moved marks must be refreshed before work continues.

What affects the cost of directional boring near FM 850 in Overton?

The job scope sets the price for a bore near FM 850, including its length, pipe or conduit size, soil and rock, and utilities that must be exposed. Pavement, creek or drainage crossings, pits, excavator time and sand backfill also matter. The 346 road miles from Yukon affect mobilization, and Union Pacific track can add crossing coordination.

Where the Overton facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Overton

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Overton, Texas

Type the address of your job in Overton. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Overton

County: Smith County directional boring. Same county: Henderson · Lake Cherokee · Tatum · Mount Enterprise · Reklaw · Easton · Tyler · Whitehouse · Lindale · Bullard · Hideaway · Troup. All counties: Texas county list.