trinityboringsolutions.com

Directional Boring and Drilling Services in Austin, TX

Quick summary: Trinity Boring Solutions Inc. provides directional boring and drilling services in Austin, TX for water, sewer, natural gas and propane, electric and fiber conduit. The company has been family owned since 1965, has done underground construction since 1982, and sends its own crews and rigs from 9102 Northwest Expy, Yukon, OK 73099. Call (405) 409-7423, answered 24 hours a day.

Austin is about seven hours from Yukon by Interstate 35, so Austin bores are scheduled ahead. Limestone and chalk ground, city and TxDOT right of way approvals and the Texas811 ticket are lined up before the crew travels. Call (405) 409-7423.

Licensed and Insured ODOT Approved 10+ Rigs Ready 24/7 Emergency Service All 77 Oklahoma Counties Oklahoma and Texas

Directional boring in Austin, Texas. Trinity bores water, sewer, natural gas, electric and fiber lines under Austin streets, driveways, parking lots, creeks and existing utilities, with one crew handling the Texas811 ticket, hydrovac potholing, the bore, pullback and pit restoration. Call (405) 409-7423, answered 24 hours a day.

Trinity Boring Solutions at a glance

  • Serves Austin. Austin City Hall is about 401 road miles and roughly seven hours from 9102 Northwest Expy in Yukon by Interstate 35, so Austin jobs are scheduled ahead rather than same day.
  • Since 1965. Family owned. Dean Rice started the company in 1965 as an irrigation contractor, and it has done underground construction since 1982. Today Trinity is a directional boring contractor serving Oklahoma and Texas.
  • Oklahoma City metro based. Headquartered at 9102 Northwest Expy, Yukon, OK 73099, in the Oklahoma City metro. Crews and rigs cover all 77 Oklahoma counties and all of Texas, from Dallas, Fort Worth and Plano down to Houston. Jobs within about four hours of Yukon can have a crew the same day.
  • Owns its equipment. Vermeer and Ditch Witch HDD rigs, auger boring machines and hydrovac trucks, all owned outright and run by Trinity operators.
  • One crew, whole job. 811 locates and hydrovac potholing, horizontal directional drilling, auger boring with steel casing, trenching, backfill and pit restoration from the same company, so there is no handoff between a locator, a driller and an excavator.
  • Range. 3/4 inch service lines to 48 inch pipe, and bores from 10 feet to just under 4,000 feet in a single shot, with longer runs bored in sections, for water, sewer, natural gas and propane, electric and fiber.
  • Named work. A single shot just under 4,000 feet under the Arkansas River; a 48 inch HDPE water intake line out to the middle of Fort Cobb Lake; a bore beneath the John Kilpatrick Turnpike in Oklahoma City (watch the video); 840 feet of FAA conduit under runways at Will Rogers World Airport; 385 foot sandstone rock bore under creeks, a wetland and a dam in Guthrie; 6 inch PVC sleeve under NE 24th Street and a live water main at the Clara Luper Center; propane line on a hospital campus in Anadarko; emergency water line at a Stillwater sorority house.
  • Safety. An Okie811 ticket in Oklahoma, a Texas811 ticket in Texas, and hydrovac potholing on every crossing.
  • 24 hour phone. (405) 409-7423 is answered around the clock, with emergency crews for gas and water lines.

Common questions about directional boring in Austin

How much does directional boring cost in Austin?

There is no flat footage rate. In Austin the price depends on the length of each bore, the pipe or conduit size, the limestone, chalk or clay along the route, what the bore crosses, grade, existing utilities, depth, access and the travel from Yukon. Send the address, what is going in and where it has to go, and you get one written number. See how a bore is priced.

What can Trinity bore under in Austin?

Streets, driveways, sidewalks, parking lots, landscaping, creeks and drainage channels, and existing utility corridors. Trinity installs water, sewer, natural gas and propane, electric conduit and fiber from 3/4 inch service lines up to 48 inch pipe, and handles the Texas811 ticket and hydrovac potholing before the drill head goes in the ground.

How fast can Trinity Boring Solutions get to Austin?

Austin is about 401 road miles and roughly seven hours from Yukon, outside the four hour same day range, so Austin bores are scheduled ahead. The phone, (405) 409-7423, is answered 24 hours a day. The quote, the Texas811 ticket and the owner or general contractor’s permits are in place before the crew travels.

Directional Boring and Drilling Services in Austin, Texas

The Census Bureau counted 961,855 people in Austin in 2020 and estimates 1,002,632 for 2025 (U.S. Census Bureau QuickFacts). The city limits lie mostly in Travis County and extend into Hays and Williamson counties. Austin Water maintains the water mains, while property owners are responsible for service lines past the meter, which is where many private bores start.

Trinity Boring Solutions travels to Austin for directional boring, road bores and underground utility installation for general contractors, utility contractors, builders, plumbers, electricians and property owners. Each job is quoted and scheduled ahead, with the Texas811 ticket and the owner’s right of way approvals in place before the rigs leave Yukon.

The ground changes across town. The Balcones Fault Zone runs through Austin; the west Austin hills are Lower Cretaceous Glen Rose and Edwards limestone, and east of the Balcones Escarpment the rock is younger Georgetown, Del Rio, Buda and Eagle Ford formations, Austin Chalk and Taylor Clay (Bureau of Economic Geology). The U.S. Geological Survey describes the Austin Chalk as the principal formation the city is built on. Expect rock tooling on many bores and plastic clay on others.

Highway crossings are common. TxDOT’s Austin District lists Interstate 35, US 290, US 183, SH 71, SH 130, SH 45, Loop 1 (MoPac), Loop 360 and RM 620 among its strategic corridors (TxDOT Austin District profile). New utility installations in state highway right of way are requested on TxDOT’s Utility Installation Request, Form 1082, through the online Utility Installation Review system (TxDOT utility policy). The owner or general contractor obtains that approval and the traffic control plan, and Trinity bores to the approved conditions.

Trinity Boring Solutions crew member with a Vermeer directional drill

Austin Texas Boring Services

Fiber and Broadband

Underground conduit and duct for fiber providers, broadband operators and telecom contractors, from single drops under a driveway to multiple conduits under a street.

Water and Sewer

Water services, water main crossings and sewer lines under roads and drainage features for developers, plumbers and contractors, built to Austin Water standards where the line connects to the city system. See our water line services.

Natural Gas Service

Natural gas and propane line bores under Austin roads and driveways for homes, shops and commercial buildings where trenching is not practical. Every gas crossing is potholed before the drill head passes it.

Commercial Development

Boring for retail centers, office parks, campuses and mixed use developments around Austin, including utility crossings under MoPac, US 183 and other corridors once the owner holds the TxDOT or city approval.

Tech Campus Infrastructure

Underground utility bores for office, research and industrial campuses: conduit banks for power and fiber, water and sewer services, and crossings between buildings, parking and the street.

Rock Boring in Limestone

Rock tooling for the limestone and chalk under much of Austin. Trinity’s named work includes a 385 foot sandstone rock bore under creeks, a wetland and a dam in Guthrie, Oklahoma.

How We Work in Austin, Texas

  1. Texas811 ticket: Texas law requires notice at least two business days before digging, not counting weekends and holidays, and the hired contractor makes the call (Texas811). Trinity files the ticket and confirms every utility has responded before the bore starts.
  2. City right of way: Work in City of Austin right of way needs an excavation permit through Austin Transportation and Public Works, an approved traffic control plan and a ROW Contractor License, and every contractor who impacts the right of way must be named on the permit (City of Austin ROW permits). The owner or general contractor sets up the permit and traffic control.
  3. State highways: Crossings of TxDOT right of way are approved through the Utility Installation Request; Trinity bores to the depth, casing and special provisions in that approval.
  4. Ground and tooling: Each bore is planned for the formation along its path, whether Austin Chalk, limestone ledges or clay, and the crew picks tooling and drilling fluid to match.
  5. Edwards Aquifer: TCEQ Edwards Aquifer rules apply in parts of Travis, Williamson and Hays counties. Utility lines that do not carry pollutants are exempt from a protection plan but still need erosion and sediment controls (TCEQ Edwards rules), and utility creek crossings should run perpendicular to the creek unless TCEQ approves otherwise.
  6. Potholing and restoration: Every crossing is potholed with hydrovac before the bore passes it. The City of Austin asks for a pothole checklist showing horizontal and vertical locations, and restoration within four weeks after final backfill (Austin utility cut inspections).

Why Choose Trinity Boring Solutions for Austin Projects

Austin contractors need a boring crew that shows up with the right tooling for rock and clay and finishes on schedule. Trinity owns its Vermeer and Ditch Witch rigs, auger boring machines and hydrovac trucks, and the family company has done underground construction since 1982.

Bores run from 10 feet to just under 4,000 feet in a single shot, with longer runs bored in sections, and from 3/4 inch service lines to 48 inch pipe. Call to talk through an Austin job, including the ground, the approvals the owner needs and the travel schedule.

For more on our services, see our Dallas Texas boring page, our Houston Texas boring services, and our main Oklahoma directional boring page. For Texas excavation safety and utility locate requirements, see the OSHA excavation safety standards. For trenchless technology, visit NASTT.

Austin Metro Coverage

Trinity serves Austin and nearby Central Texas cities, including Round Rock, Pflugerville, Cedar Park, Leander, Georgetown, Kyle and San Marcos. See the Travis County page, our Texas directional boring page and the full list of Texas locations. Every Austin area job is scheduled ahead from Yukon.

Austin at a glance for bore planning

  • Counties: mostly Travis County, extending into Hays and Williamson counties; TxDOT Austin District.
  • Nearby cities: Round Rock, Pflugerville, Cedar Park, Leander, Georgetown, Kyle, Buda and San Marcos.
  • Highways: Interstate 35, US 290, US 183, SH 71, SH 130, SH 45, Loop 1 (MoPac), Loop 360 and RM 620.
  • Waterways: the Colorado River through Lady Bird Lake and Lake Austin, Shoal Creek, Barton Creek and Barton Springs.
  • Ground: Glen Rose and Edwards limestone in the west hills; Del Rio clay, Buda limestone, Eagle Ford shale, Austin Chalk and Taylor Clay east of the Balcones Escarpment.
  • Utilities: Austin Water reports water and wastewater emergencies 24/7 at 512.972.1000, option 1. Texas Gas Service asks anyone who smells gas to leave the area and call 911 and 800.959.5325.
  • Drive from Yukon: about 401 road miles and roughly seven hours to City Hall at 301 W 2nd St by Interstate 35.

Information We Need to Quote an Austin Directional Boring Job

  • Austin address or nearest intersection.
  • Utility type: water, sewer, natural gas or propane, electric or fiber.
  • Pipe or conduit size and material, such as HDPE, PVC or steel casing.
  • Length of each bore and where it starts and ends.
  • Required depth, or the slope a gravity sewer has to hold.
  • Known rock, limestone ledges, groundwater, creek crossings, or whether the site is over the Edwards Aquifer zones.
  • Room for entry and exit pits and for the rig.
  • Plans, a sketch or photos from both ends of the route.
  • Permit and locate status: City of Austin excavation permit, TxDOT approval if a state highway is involved, and any Texas811 ticket number.

Call (405) 409-7423 with those details for a written quote.

Map of Austin, Texas

Directional boring service area map for Austin, Texas. Call (405) 409-7423 with the address or cross streets of your bore.

Free Bore Planner

Plan Your Bore in Austin, Texas

Type the address of your job in Austin. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Frequently Asked Questions

Can you bore through Austin’s limestone and chalk geology?

Yes. Austin bores often run through Austin Chalk, limestone ledges or Del Rio and Taylor clay, depending on which side of the Balcones Escarpment the job sits. The crew plans each bore for the formation along its path and brings rock tooling and a drilling fluid program to match. Trinity’s approved named work includes a 385 foot sandstone rock bore in Guthrie, Oklahoma.

Do you handle TxDOT permits for Austin highway crossings?

No. The owner or general contractor obtains TxDOT approval, which for a new utility in state highway right of way is the Utility Installation Request, Form 1082, usually filed through TxDOT’s online Utility Installation Review system. Trinity bores to the depth, casing and special provisions in that approval and gives the depths and locations for the record. Trinity is not TxDOT prequalified.

What precautions do you take for boring in the Edwards Aquifer recharge zone?

TCEQ Edwards Aquifer rules cover parts of Travis, Williamson and Hays counties. Utility lines that do not carry pollutants are exempt from a protection plan, but erosion and sediment controls must go in before work and stay in place, and creek crossings should run perpendicular to the creek unless TCEQ approves otherwise. The crew watches drilling fluid returns and follows the project’s environmental conditions.

Can you bore for tech campus fiber and utility infrastructure in Austin?

Yes. Office, research and industrial campuses usually need conduit banks for power and fiber, plus water and sewer services and crossings under drives and parking. Trinity bores conduit and pipe from 3/4 inch services to 48 inch pipe and works for the general contractor or electrical contractor on the site, potholing each crossing before the bore passes it.

How do you handle Austin’s dense existing utility infrastructure?

Every job starts with a Texas811 ticket, and the crew checks that each utility has responded. Austin Water, Austin Energy, Texas Gas Service and several telecom carriers can share the same right of way, so Trinity hydrovac potholes every crossing to see the real depth before the drill head passes. Austin also asks for a pothole checklist with horizontal and vertical locations.

Can you bore under the Colorado River or Barton Creek in Austin?

Waterway crossings are possible but need the owner’s environmental approvals first, which can include federal and state permits and, over the Edwards Aquifer zones, TCEQ conditions such as perpendicular creek crossings. Trinity has bored a single shot just under 4,000 feet under the Arkansas River. Send the location and plans and the crew can review whether a bore fits.

What is your mobilization time to reach Austin from Oklahoma?

Austin is about 401 road miles and roughly seven hours from our Yukon headquarters by Interstate 35. That is outside the four hour same day range, so Austin work is scheduled ahead. The start date depends on the crew schedule, the Texas811 ticket and the permits the owner or general contractor holds; call (405) 409-7423 for current availability.

Do you serve Round Rock, Cedar Park, and the north Austin suburbs?

Yes. Trinity serves Round Rock, Cedar Park, Leander, Georgetown and Pflugerville north of Austin, and Kyle, Buda and San Marcos to the south, on the same scheduled ahead basis as Austin. Each city sets its own right of way rules, so the permit holder checks with that city before the crew is booked. See the city pages linked above for each one.

Can you install water main crossings for Austin Water utility projects?

Yes, for private development and contractor projects that connect to the Austin Water system. Austin Water maintains the mains, and the property owner is responsible for the service line past the meter. Trinity bores to the approved plans and Austin Water standards for the connection, and the permit holder schedules the city inspections.

How do I request a quote for boring in Austin Texas?

Call (405) 409-7423 or send project details through our contact page. Include the address or nearest intersection, utility type, pipe size, bore length, what it crosses, any known rock or groundwater, and the permit and Texas811 status. You get a free written quote for your Austin boring project.

Do you do utility potholing in Austin, TX?

Yes, as part of Trinity bores. The crew uses its own hydrovac trucks to pothole every marked crossing along the bore path, so the real depth and position of each line is known before the drill head passes it. Austin asks for a pothole checklist showing horizontal and vertical locations. See our utility potholing page.

Who calls Texas811 before a bore in Austin, and how long does it take?

If you hire a contractor, the contractor makes the call. Texas law requires notice at least two business days before digging, not counting weekends and holidays, and the locate request is free by phone at 811 or online. Digging can start once that time has passed and every utility on the ticket has responded. Trinity files the ticket on its jobs.

Who pulls the right of way permit for a bore in Austin?

The owner or general contractor. Austin requires an excavation permit for work in city right of way, applied for online, with an approved traffic control plan, and the contractor doing the work needs a City of Austin ROW Contractor License and must be named on the permit. Settle who holds the permit before scheduling; Trinity bores to the approved plan.

What is the difference between jack and bore and directional drilling?

Jack and bore, also called auger boring, pushes a steel casing straight under a road or rail line from a pit on each side, and suits gravity lines that must hold a set grade. Directional drilling steers a drill head along a curved path from the surface, then pulls the pipe back, and suits water, gas, electric and fiber. Trinity owns equipment for both. See jack and bore.

How deep are utility lines buried in Austin?

There is no single depth. Each utility sets its own standard, and regrading, erosion and later work can change how deep a line sits, which is why Texas811 asks for a new ticket every time you dig. Locate marks show where a line runs, not how deep it is. Trinity hydrovac potholes every crossing to see the real depth before boring past it.

Get a Free Quote for Austin Texas Boring

Directional boring for Austin and Central Texas, scheduled ahead from Yukon, Oklahoma, with rock tooling, a Texas811 ticket and hydrovac potholing on every crossing. Call Trinity Boring Solutions.

Trinity Boring Solutions
9102 Northwest Expy, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to just under 4,000 feet in a single shot, with longer runs bored in sections, 3/4 inch service line through 48 inch pipe, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page